Complete Help Docs

Laser Show Technology for Lighting Professionals

User Tools

Site Tools

You are here: The Pangolin Wiki » Lasershow Designer BEYOND Manual » PangoScript Commands
beyond:pangoscript_commands

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
Next revision Both sides next revision
beyond:pangoscript_commands [2020/05/26 12:39]
Bob Varkevisser 		beyond:pangoscript_commands [2020/05/26 12:54]
Bob Varkevisser
Line 1: Line 1:
-PangoScript Commands+====== PangoScript Commands ======
  
-^ Function ^ Code ^ Description ^ 
-| AddSMS | AddSMS "This is my demo message" | | 
-| Angle | Angle 0,0,0 | X,Y,Z angles in degrees | 
  
-AngleDelta +===== A-B-C =====
-AngleDelta 0,0,0 // increment X,Y,Z angles in degrees+
  
-AngleX 
-AngleX 0 // degree 
  
-AngleY +^ Function ^ Code ^ Comments ^ 
-AngleY 0 // degree+| AddSms | AddSMS "This is my demo message" |  
 +| Angle | Angle 0,0,0 | X,Y,Z angles in degrees |  
 +| AngleDelta | AngleDelta 0,0,0 | increment X,Y,Z angles in degrees |  
 +| AngleX | AngleX 0 | degree |  
 +| AngleY | AngleY 0 | degree |  
 +| AngleZ | AngleZ 0 | degree |  
 +| AnimateProp | AnimateProp "", 0,1,1000 | "variable", From, To, Duration MS |  
 +| AnimatePropDelta | AnimatePropDelta "", 10,1000 | "variable", Delta, Duration MS |  
 +| AnimationSpeed | AnimationSpeed 100 | speed in %. Zero full stop. |  
 +| AnimationSpeedDelta | AnimationSpeedDelta 0 |  
 +| AudioBeat | AudioBeat |  
 +| Autostart | AutoStart |  
 +| BeatResync | BeatResync |  
 +| BeatTap | BeatTap |  
 +| BlackOut | BlackOut |  
 +| Brightness | Brightness 100 | 0..100 (percents) |  
 +| BrightnessDelta | BrightnessDelta 0 |  
 +| CaptureToClipboard | CaptureToClipboard  |  
 +| ChannelOut | ChannelOut 1, 1000 | set first channel to 1000 (max value) | 
 +| ClickFXStopAll |  
 +| ClickFXTabMode | ClickFXTabMode 1 | 1-Master, 2-Cue, 3-Zone, 4-ProTrack |  
 +| ClickFlash | ClickFlash   | optional argument: 1 or 2 (Grid number) |  
 +| ClickFxVlj | ClickFxVlj 1 | Toggle first FX-VLJ  |  
 +| ClickLCTabMode | ClickLCTabMode 1 | 1-Master, 2-Cue, 3-Zone, 4-ProTrack |  
 +| ClickLive | ClickLive   | optional argument: 1 or 2 (Grid number) |  
 +| ClickLockSize | ClickLockSize 1  |0,1,2 Off, On, toggle |  
 +| ClickRestart | ClickRestart   | optional argument: 1 or 2 (Grid number) |  
 +| ClickScrollA | ClickScrollA -5 | scroll speed, recommended -5..-1, or 1..5. Zero will stop. |  
 +| ClickScrollAniSpeed | ClickScrollAniSpeed -5 | scroll speed, recommended -5..-1, or 1..5. Zero will stop. |  
 +| ClickScrollB | ClickScrollB -5 | scroll speed, recommended -5..-1, or 1..5. Zero will stop. |  
 +| ClickScrollColor | ClickScrollColor -5 | scroll speed, recommended -5..-1, or 1..5. Zero will stop. |  
 +| ClickScrollFade | ClickScrollFade -5 | scroll speed, recommended -5..-1, or 1..5. Zero will stop. |  
 +| ClickScrollG | ClickScrollG -5 | scroll speed, recommended -5..-1, or 1..5. Zero will stop. |  
 +| ClickScrollHue | ClickScrollHue -5 | scroll speed, recommended -5..-1, or 1..5. Zero will stop. |  
 +| ClickScrollHueShift | ClickScrollHueShift -5 | scroll speed, recommended -5..-1, or 1..5. Zero will stop. |  
 +| ClickScrollR | ClickScrollR -5 | scroll speed, recommended -5..-1, or 1..5. Zero will stop. |  
 +| ClickScrollSaturation | ClickScrollSaturation -5 | scroll speed, recommended -5..-1, or 1..5. Zero will stop. |  
 +| ClickScrollScanRate | ClickScrollScanRate -5 | scroll speed, recommended -5..-1, or 1..5. Zero will stop. |  
 +| ClickScrollSize | ClickScrollSize -5 | scroll speed, recommended -5..-1, or 1..5. Zero will stop. |  
 +| ClickScrollVPoints | ClickScrollVPoints -5 | scroll speed, recommended -5..-1, or 1..5. Zero will stop. |  
 +| ClickScrollZoom | ClickScrollZoom -5 | scroll speed, recommended -5..-1, or 1..5. Zero will stop. |  
 +| ClickSelect | ClickSelect  | optional argument: 1 or 2 (Grid number) |  
 +| ClickSoloFlash | ClickSoloFlash   | optional argument: 1 or 2 (Grid number) |  
 +| ClickTCTabMode | ClickTCTabMode 1 | 1-Master, 2-Cue, 3-Zone, 4-ProTrack |  
 +| ClickToggle | ClickToggle  | optional argument: 1 or 2 (Grid number) |  
 +| ClickTrack | ClickTrack   | optional argument: 1 or 2 (Grid number) |  
 +| CloseUmax | CloseUmax |  
 +| CodeColorMarker | CodeColorMarker 0x00FF00 | green color marker  |  
 +| CodeName | CodeName "MyCode" | define name of  |  
 +| CodeShortcut | CodeShortcut "Ctrl+D" |  
 +| ColorBGR | ColorBGR 0x0000FF | blue color |  
 +| ColorOn | ColorOn 1| 1-enabled, 0-disabled |  
 +| ColorRGB | ColorRGB 0x0000FF | red color,  |  
 +| ColorSlider | ColorSlider 0 | 0..255 |  
 +| ColorSliderDelta | ColorSliderDelta 0 |  
 +| ControlCue | ControlCue 1,1 |  
 +| ControlFromFxTab | ControlFromFxTab |  
 +| ControlFromLcTab | ControlFromLcTab |  
 +| ControlFromTcTab | ControlFromTcTab |  
 +| ControlFromUI | ControlFromUI |  
 +| ControlMaster | ControlMaster |  
 +| ControlProTrack | ControlProTrack 1 |  
 +| ControlProjector | ControlProjector 1 |  
 +| ControlSelCues | ControlSelCues |  
 +| ControlSelProTracks | ControlSelProTracks |  
 +| ControlSelZones | ControlSelZones |  
 +| ControlZone | ControlZone 1 | name as "Main Graphics", or zone number 1...N |  
 +| CueDown | Cuedown 1,1 | page 1..100, cue 1..100 |  
 +| CueUp | CueUp 1,1 | page 1..100, cue 1..100 | 
  
-AngleZ +===== D-E-F =====
-AngleZ 0 // degree+
  
-AnimateProp 
-AnimateProp "", 0,1,1000 // "variable", From, To, Duration MS 
  
-AnimatePropDelta +^ Function ^ Code ^ Comments ^ 
-AnimatePropDelta "", 10,1000 // "variable", Delta, Duration MS+| DecreaseTrigger | DecreaseTrigger 0,100,"MyLabel" | Min Value, Max Value, Label name |  
 +| DefineDmxTrigger | DefineDmxTrigger 1 | Channel |  
 +| DefineMidiTrigger | DefineMidiTrigger 0xC0, 0x00 | MIDI Cmmand, MIDI Data 1, Trigger Name (optional), MIDI Dev index from 0 to 3 (optional), but default - any |  
 +| DefineTcTrigger | DefineTCTrigger "TC Test"| hour, minute, second |  
 +| DefineTrigger | DefineTrigger "2+2" | expression... |  
 +| DeletePropAni | DeletePropAni | "variable", ["variable",..] |  
 +| DisableLaserOutput | DisableLaserOutput |  
 +| DisplayPopup | DisplayPopup "Hello world!" |  
 +| DisplayPopupOnTop | DisplayPopupOnTop "Hello world!" |  
 +| DisplayPreview | DisplayPreview "Hello world!", 0x0000ff |  
 +| DmxInMute | DmxInMute 1, 255 | Channel index, 0 or 1; or ChannelIndex |  
 +| DmxOut | DmxOut 1, 255 | set first DMX OUT channel to 255 (max value) |  
 +| DmxOutRange | DmxOutRange 1, 255 | set first DMX OUT channel  |  
 +| DropFX | DropFX 1,1, 1000 | Layer, Index, duration ms |  
 +| Echo | Echo 2  | 0-none, 1-ok/error, 2-echo of input plus ok/error |  
 +| EnableDmxIn | EnableDmxIn Toggle  | ON, OFF, TOGGLE |  
 +| EnableFb3StyleDmxIn | EnableFb3StyleDmxIn 1 | On(1), Off(0), Toggle(2) |  
 +| EnableLaserOutput | EnableLaserOutput |  
 +| ExecCmd | ExecCmd "Blackout" |  
 +| Exit | Exit |  
 +| ExitBEYOND | ExitBEYOND | Exit from BEYOND |  
 +| FX | FX 0,0,0,0 | One or more layers. 0 stop. Effect 1..100 |  
 +| FXAction | FXAction 100,100,100,100 | One or more layers. Set effect action from 0% to 100% |  
 +| FXCellClick | FXCellClick 1,1 |  
 +| FXCellDown | FXCellDown 1, 1 | Layer number: 1..4, Effect number |  
 +| FXClick | FXClick 1,1 |  
 +| FXScroll | FXScroll 1 |  
 +| FXScrollDelta | FXScrollDelta 8 |  
 +| FXTimeScaleAx | FXTimeScaleAx 1,2,1 | Layer, Mask (1,2,3), multiplier |  
 +| FXTimeScaleAxReset | FXTimeScaleAxReset 1,2 | Layer, Mask (1,2,3) |  
 +| FXTimeScaleDeltaAx | FXTimeScaleDeltaAx 1,2,1 | Layer, Mask (1,2,3), increment value |  
 +| FXTimeSync | FXTimeSync 1,1 | Layer, Source (1-Master, 2-Own time) |  
 +| FocusCell | FocusCell 1,1 | Column (1..10), Row (1..6) |  
 +| FocusCellIndex | FocusCellIndex 1 | cell index, 1..60 |  
 +| FocusProTrack | FocusProTrack 1 | Track index/name |  
 +| FocusProjector | FocusProjector 1 | Projector index, 1..N. |  
 +| FocusZone | FocusZone 1 | zone index, 1..N. | 
  
-AnimationSpeed +===== G-H-I =====
-AnimationSpeed 100 // speed in %. Zero full stop.+
  
-AnimationSpeedDelta +^ Function ^ Code ^ Comments ^ 
-AnimationSpeedDelta 0+| GetFxControl | GetFxControl | | 
 +| GetLiveControl | GetLiveControl |  
 +| GetPage | GetPage |  
 +| GetTimeControl | GetPage |  
 +| GoGridMode | GoGridMode |  
 +| GoPlayListMode | GoPlayListMode |  
 +| GoTimelineMode | GoTimelineMode |  
 +| GoUniverseMode | GoUniverseMode |  
 +| GroupCue | GroupCue |  
 +| Hello | hello | answer will be Hello! |  
 +| HoldClick | HoldClick ON | 
  
-AudioBeat + | HtmlBody |  
-AudioBeat+HtmlBody | 
  
-Autostart + | HtmlClearBody |  
-AutoStart+HtmlClearBody | 
  
-BeatResync + | HtmlClearHead |  
-BeatResync+HtmlClearHead | 
  
-BeatTap + | HtmlHead |  
-BeatTap+HtmlHead | 
  
-BlackOut + | HtmlHide |  
-BlackOut+HtmlHide | 
  
-Brightness + | HtmlUpdate |  
-Brightness 100 // 0..100 (percents)+HtmlUpdate | 
  
-BrightnessDelta + | Hue |  
-BrightnessDelta 0+Hue 0 | 
  
-CaptureToClipboard + | HueDelta |  
-CaptureToClipboard +HueDelta 0 | 
  
-ChannelOut + | HueShift |  
-ChannelOut 1, 1000 // set first channel to 1000 (max value)+HueShift 0 | 
  
-ClickFXStopAll + | HueShiftDelta |  
-ClickFXStopAll +HueShiftDelta 0 | 
  
-ClickFXTabMode + | InRangeTrigger |  
-ClickFXTabMode 1 // 1-Master, 2-Cue, 3-Zone, 4-ProTrack+InRangeTrigger 0,100,"MyLabel" | Min Value, Max Value, Label name | 
  
-ClickFlash + | InRangeTriggerCmd |  
-ClickFlash   // optional argument: 1 or 2 (Grid number)+InRangeTriggerCmd 0,100,"Blackout" | Min Value, Max Value, Command | 
  
-ClickFxVlj + | IncreaseTrigger |  
-ClickFxVlj 1 // Toggle first FX-VLJ +IncreaseTrigger 0,100,"MyLabel" | Min Value, Max Value, Label name | 
  
-ClickLCTabMode + | InvertPlayersTime |  
-ClickLCTabMode 1 // 1-Master, 2-Cue, 3-Zone, 4-ProTrack+InvertPlayersTime | 
  
-ClickLive + | InvertProTrackTime |  
-ClickLive   // optional argument: 1 or 2 (Grid number)+InvertProTrackTime | 
  
-ClickLockSize + | InvertRotationX |  
-ClickLockSize 1  //0,1,2 Off, On, toggle+InvertRotationX | 
  
-ClickRestart + | InvertRotationY |  
-ClickRestart   // optional argument: 1 or 2 (Grid number)+InvertRotationY | 
  
-ClickScrollA + | InvertRotationZ |  
-ClickScrollA -5 // scroll speed, recommended -5..-1, or 1..5. Zero will stop.+InvertRotationZ | 
  
-ClickScrollAniSpeed + | LessThanTrigger |  
-ClickScrollAniSpeed -5 // scroll speed, recommended -5..-1, or 1..5. Zero will stop.+LessThanTrigger 0,"MyLabel" | Value, Label name | 
  
-ClickScrollB + | LinePerCycle |  
-ClickScrollB -5 // scroll speed, recommended -5..-1, or 1..5. Zero will stop.+LinePerCycle 24 | 
  
-ClickScrollColor + | LoadCue |  
-ClickScrollColor -5 // scroll speed, recommended -5..-1, or 1..5. Zero will stop.+LoadCue "c:\MyAnimationFile.bani" | Enter correct file name! | 
  
-ClickScrollFade + | LoadCueFromBlob |  
-ClickScrollFade -5 // scroll speed, recommended -5..-1, or 1..5. Zero will stop.+<internal commmand> | 
  
-ClickScrollG + | LoadPlaylist |  
-ClickScrollG -5 // scroll speed, recommended -5..-1, or 1..5. Zero will stop.+LoadPlaylist "c:\MyPlaylist.BeyondSL" | 
  
-ClickScrollHue + | LoadWorkspace |  
-ClickScrollHue -5 // scroll speed, recommended -5..-1, or 1..5. Zero will stop.+LoadWorkspace "c:\MyWorkspace.BeyondWorkspace" | Enter correct file name! | 
  
-ClickScrollHueShift + | LoadZoneFromBlob |  
-ClickScrollHueShift -5 // scroll speed, recommended -5..-1, or 1..5. Zero will stop.+<internal commmand> | 
  
-ClickScrollR + | MakeSecuredFile |  
-ClickScrollR -5 // scroll speed, recommended -5..-1, or 1..5. Zero will stop.+MakeSecuredFile "Input file name", "Output file name", ClientHardwareSerial | 
  
-ClickScrollSaturation + | ManualBeat |  
-ClickScrollSaturation -5 // scroll speed, recommended -5..-1, or 1..5. Zero will stop.+ManualBeat | 
  
-ClickScrollScanRate + | MasterAudioVolume |  
-ClickScrollScanRate -5 // scroll speed, recommended -5..-1, or 1..5. Zero will stop.+MasterAudioVolume 100 | in percents | 
  
-ClickScrollSize + | MasterAudioVolumeMute |  
-ClickScrollSize -5 // scroll speed, recommended -5..-1, or 1..5. Zero will stop.+MasterAudioVolumeMute 1 | On(1), Off(0), Toggle(2) | 
  
-ClickScrollVPoints + | MasterClockShift |  
-ClickScrollVPoints -5 // scroll speed, recommended -5..-1, or 1..5. Zero will stop.+MasterClockShift 0 | in seconds | 
  
-ClickScrollZoom + | MasterCueLcSpeed |  
-ClickScrollZoom -5 // scroll speed, recommended -5..-1, or 1..5. Zero will stop.+MasterCueLcSpeed 100 | in percents | 
  
-ClickSelect + | MasterCueSpeed |  
-ClickSelect  // optional argument: 1 or 2 (Grid number)+MasterCueSpeed 100 | in percents | 
  
-ClickSoloFlash + | MasterEffectClockShift |  
-ClickSoloFlash   // optional argument: 1 or 2 (Grid number)+MasterEffectClockShift 0 | in seconds | 
  
-ClickTCTabMode + | MasterEffectMetroShift |  
-ClickTCTabMode 1 // 1-Master, 2-Cue, 3-Zone, 4-ProTrack+MasterEffectMetroShift 0 | in beats | 
  
-ClickToggle + | MasterFXSpeed |  
-ClickToggle  // optional argument: 1 or 2 (Grid number)+MasterFXSpeed 100 | in percents | 
  
-ClickTrack + | MasterLCSpeed |  
-ClickTrack   // optional argument: 1 or 2 (Grid number)+MasterLCSpeed 100 | in percents | 
  
-CloseUmax + | MasterMetroShift |  
-CloseUmax+MasterMetroShift 0 | in beats | 
  
-CodeColorMarker + | MasterPause |  
-CodeColorMarker 0x00FF00 // green color marker +MasterPause Toggle |ON, OFF, TOGGLE | 
  
-CodeName + | MasterPauseTime |  
-CodeName "MyCode" // define name of +MasterPauseTime 1000 | time in milliseconds | 
  
-CodeShortcut + | MasterShowBrightness |  
-CodeShortcut "Ctrl+D"+MasterShowBrightness 100 | in percents | 
  
-ColorBGR + | MasterShowSpeed |  
-ColorBGR 0x0000FF // blue color+MasterShowSpeed 100 | in percents | 
  
-ColorOn + | MasterSpeed |  
-ColorOn 1// 1-enabled, 0-disabled+MasterSpeed 1 | From zero to one | 
  
-ColorRGB + | MasterTransition |  
-ColorRGB 0x0000FF // red color, +MasterTransition ON | 
  
-ColorSlider + | MasterTransitionIndex |  
-ColorSlider 0 // 0..255+MasterTransitionIndex 2 | 
  
-ColorSliderDelta + | MasterTransitionTime |  
-ColorSliderDelta 0+MasterTransitionTime 0.1 | 
  
-ControlCue + | MasterZoneFxSpeed |  
-ControlCue 1,1+MasterZoneFxSpeed 100 | in percents | 
  
-ControlFromFxTab + | MeshCurve |  
-ControlFromFxTab+MeshCurve 1,2,3 | quad-spline between point 1,2 and 3 | 
  
-ControlFromLcTab + | MeshPoint |  
-ControlFromLcTab+MeshPoint -100,-100, 0, "LeftBottom" | 
  
-ControlFromTcTab + | MeshPointChan |  
-ControlFromTcTab+MeshPointChan 1,0,0 | 
  
-ControlFromUI + | MeshPolygon |  
-ControlFromUI+MeshPolygon 1,2 | connect 1st and 2nd point | 
  
-ControlMaster + | MeshRect |  
-ControlMaster+MeshRect 1,2,3,4  | 
  
-ControlProTrack + | MeshSpline |  
-ControlProTrack 1+MeshSpline 1,2,3,4 | cubic-spline based on 4 points. 1,4 bases, 2,3 "handles" | 
  
-ControlProjector + | MeshTriangle |  
-ControlProjector 1+MeshTriangle 1,2,3 | 
  
-ControlSelCues + | MidiOut |  
-ControlSelCues+MidiOut 0x90, 0x40, 0x7F | 
  
-ControlSelProTracks + | MidiOutLong |  
-ControlSelProTracks+MidiOutLong 0x90, 0x40, 0x7F | 
  
-ControlSelZones + | MidiSysexAdd |  
-ControlSelZones+MidiSysexAdd  "F0477F"  | add data to Systex buffer, string must represent sequence of hex values. In addition, you may use integer parameters | 
  
-ControlZone + | MidiSysexSend |  
-ControlZone 1 // name as "Main Graphics", or zone number 1...N+MidiSysexSend | send prepared sysex buffer | 
  
-CueDown + | MidiSysexStart |  
-CueDown 1,1 // page 1..100, cue 1..100+MidiSysexStart  | clear Sysex buffer | 
  
-CueUp + | MoreThanTrigger |  
-CueUp 1,1 // page 1..100, cue 1..100+MoreThanTrigger 0,"MyLabel" | Value, Label name | 
  
-DecreaseTrigger + | MoveFocus |  
-DecreaseTrigger 0,100,"MyLabel" // Min Value, Max Value, Label name+MoveFocus -1,0 | number of cells to go horizontally and vertically | 
  
-DefineDmxTrigger + | MulFXMulAx |  
-DefineDmxTrigger 1 // Channel+MulFXMulAx 1, 3, 1 | Multiply multiplier... :-) Layer number: 1..4, Mask (1 is clock, 2 is beat, 3 is clock and beat), Value of multiplier | 
  
-DefineMidiTrigger + | MultiCue |  
-DefineMidiTrigger 0xC0, 0x00 // MIDI Cmmand, MIDI Data 1, Trigger Name (optional), MIDI Dev index from 0 to 3 (optional), but default - any+MultiCue | 
  
-DefineTcTrigger + | MuteAllProTracks |  
-DefineTCTrigger "TC Test"// hour, minute, second+MuteAllProTracks | 
  
-DefineTrigger + | MuteProTrack |  
-DefineTrigger "2+2" // expression...+MuteProTrack 1 | index(es) or name(s) | 
  
-DeletePropAni + | MuteSelected |  
-DeletePropAni // "variable", ["variable",..]+MuteSelected | 
  
-DisableLaserOutput + | MuteSelectedZones |  
-DisableLaserOutput+MuteSelectedZones OFF | ON, OFF, TOGGLE | 
  
-DisplayPopup + | MuteZone |  
-DisplayPopup "Hello world!"+MuteZone 0 | index(es) or name(s) | 
  
-DisplayPopupOnTop + | MuteZonesOfProjector |  
-DisplayPopupOnTop "Hello world!"+MuteZonesOfProjector 1 | projector index, 1..N. | 
  
-DisplayPreview + | OneCue |  
-DisplayPreview "Hello world!", 0x0000ff+OneCue | one cue per workspace | 
  
-DmxInMute + | OnePer |  
-DmxInMute 1, 255 // Channel index, 0 or 1; or ChannelIndex+OnePer | one cue per projectoin zone  | 
  
-DmxOut + | OscOut |  
-DmxOut 1, 255 // set first DMX OUT channel to 255 (max value)+OscOut "/beam1/xy", -5, 100 | set beam 1 position to [-5,100] | 
  
-DmxOutRange + | OscOutTTS |  
-DmxOutRange 1, 255 // set first DMX OUT channel +OscOutTTS "","" | Address, Type Tag String, Arguments (optional) | 
  
-DropFX + | OutOfRangeTrigger |  
-DropFX 1,1, 1000 // Layer, Index, duration ms+OutOfRangeTrigger 0,100,"MyLabel" | Min Value, Max Value, Label name | 
  
-Echo + | OutOfRangeTriggerCmd |  
-Echo 2  // 0-none, 1-ok/error, 2-echo of input plus ok/error+OutOfRangeTriggerCmd 0,100,"Blackout" | Min Value, Max Value, Command | 
  
-EnableDmxIn + | Password |  
-EnableDmxIn Toggle  // ON, OFF, TOGGLE+password "enter pasword here" | 
  
-EnableFb3StyleDmxIn + | PasteToCue |  
-EnableFb3StyleDmxIn 1 // On(1), Off(0), Toggle(2)+PasteToCue | 
  
-EnableLaserOutput + | PauseCue |  
-EnableLaserOutput+PauseCue 1,1, TOGGLE | page, cue, action (ON, OFF, TOGGLE) | 
  
-ExecCmd + | PlayListFirst |  
-ExecCmd "Blackout"+PlayListFirst | 
  
-Exit + | PlayListLast |  
-Exit+PlayListLast | 
  
-ExitBEYOND + | PlayListNext |  
-ExitBEYOND // Exit from BEYOND+PlayListNext | 
  
-FX + | PlayListPlay |  
-FX 0,0,0,0 // One or more layers. 0 stop. Effect 1..100+PlayListPlay | 
  
-FXAction + | PlayListPrev |  
-FXAction 100,100,100,100 // One or more layers. Set effect action from 0% to 100%+PlayListPrev | 
  
-FXCellClick + | PlayListSetPos |  
-FXCellClick 1,1+PlayListSetPos 1 | 
  
-FXCellDown + | PlayListSetTime |  
-FXCellDown 1, 1 // Layer number: 1..4, Effect number+PlayListSetTime 0 | 
  
-FXClick + | PlayListStop |  
-FXClick 1,1+PlayListStop | 
  
-FXScroll + | PlayTimeline |  
-FXScroll 1+PlayTimeline | 
  
-FXScrollDelta + | PlayersDisk |  
-FXScrollDelta 8+PlayersDisk 1, 0.1 | 
  
-FXTimeScaleAx + | PlayersDiskShift |  
-FXTimeScaleAx 1,2,1 // Layer, Mask (1,2,3), multiplier+PlayersDiskShift 0.1 | 
  
-FXTimeScaleAxReset + | PlayersResetJump |  
-FXTimeScaleAxReset 1,2 // Layer, Mask (1,2,3)+PlayersResetJump | 
  
-FXTimeScaleDeltaAx + | PlayersSetJump |  
-FXTimeScaleDeltaAx 1,2,1 // Layer, Mask (1,2,3), increment value+PlayersSetJump | 
  
-FXTimeSync + | PlayersSetLoop |  
-FXTimeSync 1,1 // Layer, Source (1-Master, 2-Own time)+PlayersSetLoop | 
  
-FocusCell + | Position |  
-FocusCell 1,1 // Column (1..10), Row (1..6)+Position 0,0,0 | X,Y,Z position.  | 
  
-FocusCellIndex + | PositionDelta |  
-FocusCellIndex 1 // cell index, 1..60+PositionDelta 0,0,0 | X,Y,Z  | 
  
-FocusProTrack + | PositionIndex |  
-FocusProTrack 1 // Track index/name+PositionIndex 1,0 | one axiz only: 1 is X, 2 is Y, 3 is Z. Second paramater is Value, 0 center, 100 is max | 
  
-FocusProjector + | PositionX |  
-FocusProjector 1 // Projector index, 1..N.+PositionX 0 |-100..100 | 
  
-FocusZone + | PositionY |  
-FocusZone 1 // zone index, 1..N.+PositionY 0 |-100..100 | 
  
-GetFxControl + | PositionZ |  
-GetFxControl+PositionZ 0 |-100..100 | 
  
-GetLiveControl + | PreviewMaster |  
-GetLiveControl+PreviewMaster | 
  
-GetPage + | PreviewNxN |  
-GetPage+PreviewNxN 1 | 1 - laser, 2 - 2x2, 3 - 3x3, 4 - 4x4 | 
  
-GetTimeControl + | ProTrackDisk |  
-GetPage+ProTrackDisk 1, 0.1 | 
  
-GoGridMode + | ProTrackDiskShift |  
-GoGridMode+ProTrackDiskShift 0.1 | 
  
-GoPlayListMode + | ProTrackResetJump |  
-GoPlayListMode+ProTrackResetJump | 
  
-GoTimelineMode + | ProTrackSetJump |  
-GoTimelineMode+ProTrackSetJump | 
  
-GoUniverseMode + | ProTrackSetLoop |  
-GoUniverseMode+ProTrackSetLoop | 
  
-GroupCue + | ProjectionZonesDialog |  
-GroupCue+ProjectionZonesDialog | 
  
-Hello + | PulseEvent |  
-hello // answer will be Hello!+PulseEvent "MyEventName" | 
  
-HoldClick + | QLog |  
-HoldClick ON+QLog "My message to QLog tab" | 
  
-HtmlBody + | RGBA |  
-HtmlBody+RGBA 255,255,255,255 | R,G,B,Alpha. 0..255 | 
  
-HtmlClearBody + | RGBADelta |  
-HtmlClearBody+RGBADelta 0,0,0,0 | 
  
-HtmlClearHead + | ReStartCell |  
-HtmlClearHead+RestartCell | restart current cell | 
  
-HtmlHead + | ReStoreZoneSelection |  
-HtmlHead+ReStoreZoneSelection | 
  
-HtmlHide + | RebootConnectedFB4 |  
-HtmlHide+RebootConnectedFB4 | If you need to use this command then please contact Pangolin (report@pangolin.com) and tell what is wrong with your FB4. Thanks. | 
  
-HtmlUpdate + | RefreshDmxIn |  
-HtmlUpdate+RefreshDmxIn | activate update of DMX IN reactions, independently on data changed or no | 
  
-Hue + | RegisterOscFeedback |  
-Hue 0+RegisterOscFeedback "/beyond/master/brightness", "master.brightness" | 
  
-HueDelta + | ResetCuesFX |  
-HueDelta 0+ResetCuesFX | 
  
-HueShift + | ResetFxTiming |  
-HueShift 0+ResetFxTiming | 
  
-HueShiftDelta + | ResetLCTab |  
-HueShiftDelta 0+ResetLCTab | 
  
-InRangeTrigger + | ResetLiveControl |  
-InRangeTrigger 0,100,"MyLabel" // Min Value, Max Value, Label name+ResetLiveControl | 
  
-InRangeTriggerCmd + | ResetMasterFX |  
-InRangeTriggerCmd 0,100,"Blackout" // Min Value, Max Value, Command+ResetMasterFX | 
  
-IncreaseTrigger + | ResetMidiFeedback |  
-IncreaseTrigger 0,100,"MyLabel" // Min Value, Max Value, Label name+ResetMidiFeedback | 
  
-InvertPlayersTime + | ResetOscFeedback |  
-InvertPlayersTime+ResetOscFeedback | 
  
-InvertProTrackTime + | ResetPosition |  
-InvertProTrackTime+ResetPosition | 
  
-InvertRotationX + | ResetProTrackFX |  
-InvertRotationX+ResetProTrackFX | 
  
-InvertRotationY + | ResetRotation |  
-InvertRotationY+ResetRotation | 
  
-InvertRotationZ + | ResetRotationX |  
-InvertRotationZ+ResetRotationX | 
  
-LessThanTrigger + | ResetRotationY |  
-LessThanTrigger 0,"MyLabel" // Value, Label name+ResetRotationY | 
  
-LinePerCycle + | ResetRotationZ |  
-LinePerCycle 24+ResetRotationZ | 
  
-LoadCue + | ResetZonesFX |  
-LoadCue "c:\MyAnimationFile.bani" // Enter correct file name!+ResetZonesFX | 
  
-LoadCueFromBlob + | Restart |  
-<internal commmand>+Restart | 
  
-LoadPlaylist + | RestartCue |  
-LoadPlaylist "c:\MyPlaylist.BeyondSL"+RestartCue 1,1 | page, cue | 
  
-LoadWorkspace + | RestorePlayer |  
-LoadWorkspace "c:\MyWorkspace.BeyondWorkspace" // Enter correct file name!+RestorePlayer | 
  
-LoadZoneFromBlob + | ResyncByCueClick |  
-<internal commmand>+ResyncByCueClick On  | options: On, Off, Toggle | 
  
-MakeSecuredFile + | RotoSpeed |  
-MakeSecuredFile "Input file name", "Output file name", ClientHardwareSerial+RotoSpeed 0,0,0  | rotation speed by X,Y,Z axis. degree. | 
  
-ManualBeat + | RotoSpeedDelta |  
-ManualBeat+RotoSpeedDelta 0,0,0 | increment of rotation speed. X,Y,Z axis. | 
  
-MasterAudioVolume + | RotoSpeedX |  
-MasterAudioVolume 100 // in percents+RotoSpeedX 0 | rotation speed, degree | 
  
-MasterAudioVolumeMute + | RotoSpeedY |  
-MasterAudioVolumeMute 1 // On(1), Off(0), Toggle(2)+RotoSpeedY 0 | rotation speed, degree | 
  
-MasterClockShift + | RotoSpeedZ |  
-MasterClockShift 0 // in seconds+RotoSpeedZ 0 | rotation speed, degree | 
  
-MasterCueLcSpeed + | RunApp |  
-MasterCueLcSpeed 100 // in percents+RunApp "C:\Windows\Notepad.exe", "" | full exe file name, parameters | 
  
-MasterCueSpeed + | Saturation |  
-MasterCueSpeed 100 // in percents+Saturation 0 | 
  
-MasterEffectClockShift + | SaturationDelta |  
-MasterEffectClockShift 0 // in seconds+SaturationDelta 0 | 
  
-MasterEffectMetroShift + | ScanRate |  
-MasterEffectMetroShift 0 // in beats+ScanRate 100 | 
  
-MasterFXSpeed + | ScanRateDelta |  
-MasterFXSpeed 100 // in percents+ScanRateDelta 0 | 
  
-MasterLCSpeed + | SelectAllCat |  
-MasterLCSpeed 100 // in percents+SelectAllCat | 
  
-MasterMetroShift + | SelectAndFocusZone |  
-MasterMetroShift 0 // in beats+SelectAndFocusZone 1 | zone index, 1..N. | 
  
-MasterPause + | SelectCat |  
-MasterPause Toggle //ON, OFF, TOGGLE+SelectCat 1 | category index, 1..N. | 
  
-MasterPauseTime + | SelectCatName |  
-MasterPauseTime 1000 // time in milliseconds+SelectCatName "Graphics" | define correct Category name. | 
  
-MasterShowBrightness + | SelectCue |  
-MasterShowBrightness 100 // in percents+SelectCue "Cue01" | Enter correct Cue name! | 
  
-MasterShowSpeed + | SelectFixt |  
-MasterShowSpeed 100 // in percents+SelectFixt 0 | index(es) or name(s) | 
  
-MasterSpeed + | SelectGrid |  
-MasterSpeed 1 // From zero to one+SelectGrid 1 | 1-main grid, 2-grid at bottom. 0-recently active | 
  
-MasterTransition + | SelectMidi |  
-MasterTransition ON+SelectMidi 1 | select MIDI device pair, 1..4. | 
  
-MasterTransitionIndex + | SelectNextCat |  
-MasterTransitionIndex 2+SelectNextCat | 
  
-MasterTransitionTime + | SelectNextCatGrid1 |  
-MasterTransitionTime 0.1+SelectNextCatGrid1 | 
  
-MasterZoneFxSpeed + | SelectNextPage |  
-MasterZoneFxSpeed 100 // in percents+SelectNextPage | 
  
-MeshCurve + | SelectNextPageGrid1 |  
-MeshCurve 1,2,3 // quad-spline between point 1,2 and 3+SelectNextPageGrid1 | 
  
-MeshPoint + | SelectNextTab |  
-MeshPoint -100,-100, 0, "LeftBottom"+SelectNextTab | 
  
-MeshPointChan + | SelectNextTabGrid1 |  
-MeshPointChan 1,0,0+SelectNextTabGrid1 | 
  
-MeshPolygon + | SelectPage |  
-MeshPolygon 1,2 // connect 1st and 2nd point+SelectPage 1 | tab index, 1..N. | 
  
-MeshRect + | SelectPageName |  
-MeshRect 1,2,3,4 +SelectPageName "Graphics" | define Page name! | 
  
-MeshSpline + | SelectPrevCat |  
-MeshSpline 1,2,3,4 // cubic-spline based on 4 points. 1,4 bases, 2,3 "handles"+SelectPrevCat | 
  
-MeshTriangle + | SelectPrevCatGrid1 |  
-MeshTriangle 1,2,3+SelectPrevCatGrid1 | 
  
-MidiOut + | SelectPrevPage |  
-MidiOut 0x90, 0x40, 0x7F+SelectPrevPage | 
  
-MidiOutLong + | SelectPrevPageGrid1 |  
-MidiOutLong 0x90, 0x40, 0x7F+SelectPrevPageGrid1 | 
  
-MidiSysexAdd + | SelectPrevTab |  
-MidiSysexAdd  "F0477F"  // add data to Systex buffer, string must represent sequence of hex values. In addition, you may use integer parameters+SelectPrevTab | 
  
-MidiSysexSend + | SelectPrevTabGrid1 |  
-MidiSysexSend // send prepared sysex buffer+SelectPrevTabGrid1 | 
  
-MidiSysexStart + | SelectProTrack |  
-MidiSysexStart  // clear Sysex buffer+SelectProTrack 1 | index(es) (1..N) or name(string). Can be used more than one argument | 
  
-MoreThanTrigger + | SelectProjector |  
-MoreThanTrigger 0,"MyLabel" // Value, Label name+SelectProjector 1 | index(es) (1..N) or name(string). Can be used more than one argument | 
  
-MoveFocus + | SelectTab |  
-MoveFocus -1,0 // number of cells to go horizontally and vertically+SelectTab 1  | tab index, 1..N. | 
  
-MulFXMulAx + | SelectTabName |  
-MulFXMulAx 1, 3, 1 // Multiply multiplier... :-) Layer number: 1..4, Mask (1 is clock, 2 is beat, 3 is clock and beat), Value of multiplier+SelectTabName "Graphics" | define Page name! | 
  
-MultiCue + | SelectZone |  
-MultiCue+SelectZone 1 | zone index, 1..N. | 
  
-MuteAllProTracks + | SelectZoneName |  
-MuteAllProTracks+SelectZoneName "Main Graphics" | enter Zone name | 
  
-MuteProTrack + | SetActiveGrid |  
-MuteProTrack 1 // index(es) or name(s)+SetActiveGrid 1 | or 2  | 
  
-MuteSelected + | SetAttractionSlider |  
-MuteSelected+SetAttractionSlider 10 | 
  
-MuteSelectedZones + | SetAudioGain |  
-MuteSelectedZones OFF // ON, OFF, TOGGLE+SetAudioGain 10 | 1..15 | 
  
-MuteZone + | SetAudioInGain |  
-MuteZone 0 // index(es) or name(s)+SetAudioInGain 10 | 1 is min, 15 is max, 10 default | 
  
-MuteZonesOfProjector + | SetAudioInRelease |  
-MuteZonesOfProjector 1 // projector index, 1..N.+SetAudioInRelease 75 | 1 is min, 99 is max (slowest) 75 is default | 
  
-OneCue + | SetAudioRelease |  
-OneCue // one cue per workspace+SetAudioRelease 75 | 1..99 | 
  
-OnePer + | SetBpm |  
-OnePer // one cue per projectoin zone +SetBpm 120 | 
  
-OscOut + | SetBpmDelta |  
-OscOut "/beam1/xy", -5, 100 // set beam 1 position to [-5,100]+SetBpmDelta 1 | 
  
-OscOutTTS + | SetButtonMSL |  
-OscOutTTS "","" // Address, Type Tag String, Arguments (optional)+SetButtonMSL 1 | 
  
-OutOfRangeTrigger + | SetChannelToChannelRatio |  
-OutOfRangeTrigger 0,100,"MyLabel" // Min Value, Max Value, Label name+SetChannelToChannelRatio 0 | 0..100 | 
  
-OutOfRangeTriggerCmd + | SetCueCaptionColor |  
-OutOfRangeTriggerCmd 0,100,"Blackout" // Min Value, Max Value, Command+SetCueCaptionColor 1,2, 0x0000FF  | page 1, cue 2, color (windows, 24bit color) | 
  
-Password + | SetDmxEditorChannel |  
-password "enter pasword here"+SetDmxEditorChannel 1, 128 | 
  
-PasteToCue + | SetDmxToChannelRatio |  
-PasteToCue+SetDmxToChannelRatio 0 | 0..100 | 
  
-PauseCue + | SetEffectChannelAction |  
-PauseCue 1,1, TOGGLE // page, cue, action (ON, OFF, TOGGLE)+SetEffectChannelAction 0 |0..100 | 
  
-PlayListFirst + | SetFFTToChannelRatio |  
-PlayListFirst+SetFFTToChannelRatio 0 | 0..100 | 
  
-PlayListLast + | SetFX |  
-PlayListLast+SetFX 1, 1 | Layer number: 1..4, Effect index: 1..100 | 
  
-PlayListNext + | SetFX1MSL |  
-PlayListNext+SetFX1MSL 1 | 
  
-PlayListPlay + | SetFX2MSL |  
-PlayListPlay+SetFX2MSL 1 | 
  
-PlayListPrev + | SetFX3MSL |  
-PlayListPrev+SetFX3MSL 1 | 
  
-PlayListSetPos + | SetFX4MSL |  
-PlayListSetPos 1+SetFX4MSL 1 | 
  
-PlayListSetTime + | SetFX5MSL |  
-PlayListSetTime 0+SetFX5MSL 1 | 
  
-PlayListStop + | SetFX6MSL |  
-PlayListStop+SetFX6MSL 1 | 
  
-PlayTimeline + | SetFXAction |  
-PlayTimeline+SetFXAction 1, 100 | Layer number: 1..4, Action 0..100 percent | 
  
-PlayersDisk + | SetFXAction1 |  
-PlayersDisk 1, 0.1+SetFXAction1 100 | Action 0..100 percent | 
  
-PlayersDiskShift + | SetFXAction2 |  
-PlayersDiskShift 0.1+SetFXAction2 100 | Action 0..100 percent | 
  
-PlayersResetJump + | SetFXAction3 |  
-PlayersResetJump+SetFXAction3 100 | Action 0..100 percent | 
  
-PlayersSetJump + | SetFXAction4 |  
-PlayersSetJump+SetFXAction4 100 | Action 0..100 percent | 
  
-PlayersSetLoop + | SetFXAction5 |  
-PlayersSetLoop+SetFXAction5 100 | Action 0..100 percent | 
  
-Position + | SetFXAction6 |  
-Position 0,0,0 // X,Y,Z position. +SetFXAction6 100 | Action 0..100 percent | 
  
-PositionDelta + | SetFXAction7 |  
-PositionDelta 0,0,0 // X,Y,Z +SetFXAction7 100 | Action 0..100 percent | 
  
-PositionIndex + | SetFXAction8 |  
-PositionIndex 1,0 // one axiz only: 1 is X, 2 is Y, 3 is Z. Second paramater is Value, 0 center, 100 is max+SetFXAction8 100 | Action 0..100 percent | 
  
-PositionX + | SetFXMul |  
-PositionX 0 //-100..100+SetFXMul 1, 1,1 | Layer number: 1..4, Multiplier 1 - default value for clock and metronome | 
  
-PositionY + | SetFXMulAx |  
-PositionY 0 //-100..100+SetFXMulAx 1, 3, 1 | Layer number: 1..4, Mask (1 is clock, 2 is beat, 3 is clock and beat), Value of multiplier | 
  
-PositionZ + | SetFXMute |  
-PositionZ 0 //-100..100+SetFXMute 1, 0 | Layer number: 1..4, 0-Off, 1-On, 2-Toggle | 
  
-PreviewMaster + | SetFrictionSlider |  
-PreviewMaster+SetFrictionSlider 10 | 
  
-PreviewNxN + | SetGrid1MSL |  
-PreviewNxN 1 // 1 - laser, 2 - 2x2, 3 - 3x3, 4 - 4x4+SetGrid1MSL 1 | 
  
-ProTrackDisk + | SetGrid1Page |  
-ProTrackDisk 1, 0.1+SetGrid1Page 1 | 
  
-ProTrackDiskShift + | SetGrid2MSL |  
-ProTrackDiskShift 0.1+SetGrid2MSL 1 | 
  
-ProTrackResetJump + | SetGrid2Page |  
-ProTrackResetJump+SetGrid2Page 1 | 
  
-ProTrackSetJump + | SetGridSize |  
-ProTrackSetJump+SetGridSize 8,5 | 
  
-ProTrackSetLoop + | SetGridView |  
-ProTrackSetLoop+SetGridView | 
  
-ProjectionZonesDialog + | SetLimiterBeam |  
-ProjectionZonesDialog+SetLimiterBeam 5 | 
  
-PulseEvent + | SetLimiterDMX |  
-PulseEvent "MyEventName"+SetLimiterDMX 5 | 
  
-QLog + | SetLimiterFlash |  
-QLog "My message to QLog tab"+SetLimiterFlash 4 | 
  
-RGBA + | SetLimiterHold |  
-RGBA 255,255,255,255 // R,G,B,Alpha. 0..255+SetLimiterHold 3 | 
  
-RGBADelta + | SetLimiterPerGrid |  
-RGBADelta 0,0,0,0+SetLimiterPerGrid 10 | 
  
-ReStartCell + | SetLimiterPerZone |  
-RestartCell // restart current cell+SetLimiterPerZone 3 | 
  
-ReStoreZoneSelection + | SetLimiterProfile |  
-ReStoreZoneSelection+SetLimiterProfile 1 | 
  
-RebootConnectedFB4 + | SetLimiterShow |  
-RebootConnectedFB4 // If you need to use this command then please contact Pangolin (report@pangolin.com) and tell what is wrong with your FB4. Thanks.+SetLimiterShow 2 | 
  
-RefreshDmxIn + | SetLocation |  
-RefreshDmxIn // activate update of DMX IN reactions, independently on data changed or no+SetLocation 1, 0,0,0 | set one of 256 positions/locations (index 1..256, X,Y,Z as normalized values (0..1) | 
  
-RegisterOscFeedback + | SetMassSlider |  
-RegisterOscFeedback "/beyond/master/brightness", "master.brightness"+SetMassSlider 4 | 
  
-ResetCuesFX + | SetMidiLayer |  
-ResetCuesFX+SetMidiLayer 1 | 1..8. | 
  
-ResetFxTiming + | SetPage |  
-ResetFxTiming+SetPage 1 | 
  
-ResetLCTab + | SetPhysicsCheckbox |  
-ResetLCTab+SetPhysicsCheckbox ON | 
  
-ResetLiveControl + | SetPlayListView |  
-ResetLiveControl+SetPlayListView | 
  
-ResetMasterFX + | SetProTrackZones |  
-ResetMasterFX+SetProTrackZones 1, 1 | Track index/name, Zone name(es)/index(es) | 
  
-ResetMidiFeedback + | SetSliderMSL |  
-ResetMidiFeedback+SetSliderMSL 1 | 
  
-ResetOscFeedback + | SetTimelineView |  
-ResetOscFeedback+SetTimelineView | 
  
-ResetPosition + | SetTransitionIndex |  
-ResetPosition+SetTransitionIndex 2 | 
  
-ResetProTrackFX + | SetTransitionTime |  
-ResetProTrackFX+SetTransitionTime 0.1 | 
  
-ResetRotation + | SetUCenterPage |  
-ResetRotation+SetUCenterPage 1 | set first page | 
  
-ResetRotationX + | SetUEditPage |  
-ResetRotationX+SetUEditPage 1 | set first page | 
  
-ResetRotationY + | SetUMaxPage |  
-ResetRotationY+SetUMaxPage 1 | set first page | 
  
-ResetRotationZ + | SetUPreviewPage |  
-ResetRotationZ+SetUPreviewPage 1 | set first page | 
  
-ResetZonesFX + | SetURightPage |  
-ResetZonesFX+SetURightPage 1 | set first page | 
  
-Restart + | SetUToolPage |  
-Restart+SetUToolPage 1 | set first page | 
  
-RestartCue + | SetUniverseView |  
-RestartCue 1,1 // page, cue+SetUniverseView | 
  
-RestorePlayer + | SetVdjToChannelRatio |  
-RestorePlayer+SetVdjToChannelRatio 0 | 0..100 | 
  
-ResyncByCueClick + | SetWorkspacePageCount |  
-ResyncByCueClick On  // options: On, Off, Toggle+<internal commmand> | 
  
-RotoSpeed + | SetZoneMeshPointPos |  
-RotoSpeed 0,0,0  // rotation speed by X,Y,Z axis. degree.+SetZoneMeshPointPos 1, 1,1, 0,0 | Zone index, X node index, Y node index, X coordinate (-32K..32K), y coordinate | 
  
-RotoSpeedDelta + | SetZoneMuteMSL |  
-RotoSpeedDelta 0,0,0 // increment of rotation speed. X,Y,Z axis.+SetZoneMuteMSL 1 | 
  
-RotoSpeedX + | SetZoneSelMSL |  
-RotoSpeedX 0 // rotation speed, degree+SetZoneSelMSL 1 | 
  
-RotoSpeedY + | ShiftFX |  
-RotoSpeedY 0 // rotation speed, degree+ShiftFX 1, 1 | Layer 1..4, delta | 
  
-RotoSpeedZ + | ShiftFocus |  
-RotoSpeedZ 0 // rotation speed, degree+ShiftFocus -5 | go back and forth on N cells | 
  
-RunApp + | ShowHint |  
-RunApp "C:\Windows\Notepad.exe", "" // full exe file name, parameters+ShowHint "Hello!" | show hint window in center of main window | 
  
-Saturation + | ShowItNowSMS |  
-Saturation 0+ShowIsNowSMS 1 | 
  
-SaturationDelta + | ShowMasterHelpFile |  
-SaturationDelta 0+ShowMasterHelpFile | 
  
-ScanRate + | ShutDownWindows |  
-ScanRate 100+ShutDownWindows | require ShutDownWindows.exe application | 
  
-ScanRateDelta + | Size |  
-ScanRateDelta 0+Size 100,100,100 | Size X,Y,Z axis | 
  
-SelectAllCat + | SizeDelta |  
-SelectAllCat+SizeDelta 0,0,0 | shift Size value | 
  
-SelectAndFocusZone + | SizeIndex |  
-SelectAndFocusZone 1 // zone index, 1..N.+SizeDelta 0,0 | 
  
-SelectCat + | SizeX |  
-SelectCat 1 // category index, 1..N.+SizeX 100 | 
  
-SelectCatName + | SizeY |  
-SelectCatName "Graphics" // define correct Category name.+SizeY 100 | 
  
-SelectCue + | SizeZ |  
-SelectCue "Cue01" // Enter correct Cue name!+SizeZ 100 | 
  
-SelectFixt + | Sleep |  
-SelectFixt 0 // index(es) or name(s)+Sleep 1000 | 
  
-SelectGrid + | SoloProTrack |  
-SelectGrid 1 // 1-main grid, 2-grid at bottom. 0-recently active+SoloProTrack 1 | index(es) or name(s) | 
  
-SelectMidi + | StartAudioRecord |  
-SelectMidi 1 // select MIDI device pair, 1..4.+StartAudioRecord | 
  
-SelectNextCat + | StartCell |  
-SelectNextCat+StartCell | start current cell | 
  
-SelectNextCatGrid1 + | StartCode |  
-SelectNextCatGrid1+StartCode "MyCode" | put YOUR name of code | 
  
-SelectNextPage + | StartCue |  
-SelectNextPage+StartCue 1,1 | 
  
-SelectNextPageGrid1 + | StartPrevious |  
-SelectNextPageGrid1+StartPrevious | "Back" button | 
  
-SelectNextTab + | StartTalkClient |  
-SelectNextTab+StartUdpTalkClient | 
  
-SelectNextTabGrid1 + | StartTalkServer |  
-SelectNextTabGrid1+StartUdpTalkServer | 
  
-SelectPage + | StopAllAsync |  
-SelectPage 1 // tab index, 1..N.+StopAllAsync 0.5 | duration in seconds | 
  
-SelectPageName + | StopAllNow |  
-SelectPageName "Graphics" // define Page name!+StopAllNow | no arguments | 
  
-SelectPrevCat + | StopAllSync |  
-SelectPrevCat+StopAllSync  0.5 | duration in seconds | 
  
-SelectPrevCatGrid1 + | StopAudioRecord |  
-SelectPrevCatGrid1+StopAudioRecord | 
  
-SelectPrevPage + | StopCell |  
-SelectPrevPage+StopCell | stop current cell | 
  
-SelectPrevPageGrid1 + | StopCode |  
-SelectPrevPageGrid1+StopCode "MyCode"  | put YOUR name of code | 
  
-SelectPrevTab + | StopCue |  
-SelectPrevTab+StopCue 1,1 | 
  
-SelectPrevTabGrid1 + | StopCueNow |  
-SelectPrevTabGrid1+StopCueNow 1, 1 | page 1..100, cue 1..100 | 
  
-SelectProTrack + | StopCueSync |  
-SelectProTrack 1 // index(es) (1..N) or name(string). Can be used more than one argument+StopCueSync 1, 1, 0.5 | page 1..100, cue 1..60, time 0.. | 
  
-SelectProjector + | StopCueType |  
-SelectProjector 1 // index(es) (1..N) or name(string). Can be used more than one argument+StopCueType 255 |Mask: 1-Image, 2-Timeline, 4-DMX, 8-Sequence, 16-Beams, 32-Capture | 
  
-SelectTab + | StopFX |  
-SelectTab 1  // tab index, 1..N.+StopFX | One or more layers. 0 stop. Effect 1..100 | 
  
-SelectTabName + | StopFxCell |  
-SelectTabName "Graphics" // define Page name!+StopFXCell | Layer index, optional Cell index (relative, take into account scrollbar) | 
  
-SelectZone + | StopOnBlackout |  
-SelectZone 1 // zone index, 1..N.+StopOnBlackout 1 | 
  
-SelectZoneName + | StopProTrack |  
-SelectZoneName "Main Graphics" // enter Zone name+StopProTrack 1 | index(es) (1..N) or name(string). Can be used more than one argument | 
  
-SetActiveGrid + | StopProTrackFX |  
-SetActiveGrid 1 // or 2 +StopProTrackFX 1, 1 | Track index/name and FX line index(es). Counting from 1. If no arguments at all - stop all FX on all tracks | 
  
-SetAttractionSlider + | StopTalkClient |  
-SetAttractionSlider 10+StopUdpTalkClient | 
  
-SetAudioGain + | StopTalkServer |  
-SetAudioGain 10 // 1..15+StopUdpTalkServer | 
  
-SetAudioInGain + | StopTimeline |  
-SetAudioInGain 10 // 1 is min, 15 is max, 10 default+StopTimeline | 
  
-SetAudioInRelease + | StoreZoneSelection |  
-SetAudioInRelease 75 // 1 is min, 99 is max (slowest) 75 is default+StoreZoneSelection | 
  
-SetAudioRelease + | StrobeSpeed |  
-SetAudioRelease 75 // 1..99+StrobeSpeed 0.2 | period, flicker per second | 
  
-SetBpm + | StrobeSpeedDelta |  
-SetBpm 120+StrobeSpeedDelta 0.1 | period, flicker per second | 
  
-SetBpmDelta + | SynchronizePlayerToBeat |  
-SetBpmDelta 1+SynchronizePlayerToBeat On  | options: On, Off, Toggle | 
  
-SetButtonMSL + | TapByCueClick |  
-SetButtonMSL 1+TapByCueClick On  | options: On,Off, Toggle | 
  
-SetChannelToChannelRatio + | TimelineAddMarker |  
-SetChannelToChannelRatio 0 // 0..100+TimelineAddMarker  | 
  
-SetCueCaptionColor + | TimelineEnableTC |  
-SetCueCaptionColor 1,2, 0x0000FF  // page 1, cue 2, color (windows, 24bit color)+TimelineEnableTC | 
  
-SetDmxEditorChannel + | TimelineFirstTab |  
-SetDmxEditorChannel 1, 128+TimelineFirstTab | 
  
-SetDmxToChannelRatio + | TimelineJumpDelta |  
-SetDmxToChannelRatio 0 // 0..100+TimelineJumpDelta 1 | one second | 
  
-SetEffectChannelAction + | TimelineJumpToEnd |  
-SetEffectChannelAction 0 //0..100+TimelineJumpToEnd | 
  
-SetFFTToChannelRatio + | TimelineJumpToStart |  
-SetFFTToChannelRatio 0 // 0..100+TimelineJumpToStart | 
  
-SetFX + | TimelineLastTab |  
-SetFX 1, 1 // Layer number: 1..4, Effect index: 1..100+TimelineLastTab | 
  
-SetFX1MSL + | TimelineMarker |  
-SetFX1MSL 1+TimelineMarker | 
  
-SetFX2MSL + | TimelineNextEditPoint |  
-SetFX2MSL 1+TimelineNextEditPoint | 
  
-SetFX3MSL + | TimelineNextMarker |  
-SetFX3MSL 1+TimelineNextMarker | 
  
-SetFX4MSL + | TimelineNextTab |  
-SetFX4MSL 1+TimelineNextTab | 
  
-SetFX5MSL + | TimelinePlay |  
-SetFX5MSL 1+TimelinePlay | 
  
-SetFX6MSL + | TimelinePlayFromMarker |  
-SetFX6MSL 1+TimelinePlayFromMarker "" | 
  
-SetFXAction + | TimelinePrevEditPoint |  
-SetFXAction 1, 100 // Layer number: 1..4, Action 0..100 percent+TimelinePrevEditPoint | 
  
-SetFXAction1 + | TimelinePrevMarker |  
-SetFXAction1 100 // Action 0..100 percent+TimelinePrevMarker | 
  
-SetFXAction2 + | TimelinePrevTab |  
-SetFXAction2 100 // Action 0..100 percent+TimelinePrevTab | 
  
-SetFXAction3 + | TimelineQuickSave |  
-SetFXAction3 100 // Action 0..100 percent+TimelineQuickSave | 
  
-SetFXAction4 + | TimelineSetPos |  
-SetFXAction4 100 // Action 0..100 percent+TimelineSetPos 10 | jump to second 10 | 
  
-SetFXAction5 + | TimelineSetTabIndex |  
-SetFXAction5 100 // Action 0..100 percent+TimelineSetTabIndex | 
  
-SetFXAction6 + | TimelineSetTabName |  
-SetFXAction6 100 // Action 0..100 percent+TimelineSetTabName "MyShow" | 
  
-SetFXAction7 + | TimelineSetViewRange |  
-SetFXAction7 100 // Action 0..100 percent+TimelineSetViewRange 1,5 | from s to 5 second | 
  
-SetFXAction8 + | TimelineShiftViewRange |  
-SetFXAction8 100 // Action 0..100 percent+TimelineShiftViewRange 1 | one second shift | 
  
-SetFXMul + | TimelineShowItNow |  
-SetFXMul 1, 1,1 // Layer number: 1..4, Multiplier 1 - default value for clock and metronome+TimelineShowItNow 1 | set online mode for timeline editor | 
  
-SetFXMulAx + | TimelineStop |  
-SetFXMulAx 1, 3, 1 // Layer number: 1..4, Mask (1 is clock, 2 is beat, 3 is clock and beat), Value of multiplier+TimelineStop | 
  
-SetFXMute + | TimerBeat |  
-SetFXMute 1, 0 // Layer number: 1..4, 0-Off, 1-On, 2-Toggle+TimerBeat | 
  
-SetFrictionSlider + | ToggleCell |  
-SetFrictionSlider 10+Toggle | start/stop current cell | 
  
-SetGrid1MSL + | ToggleCue |  
-SetGrid1MSL 1+ToggleCue 1,1 | 
  
-SetGrid1Page + | ToggleFX |  
-SetGrid1Page 1+ToggleFX 1 | Layer number: 1..4 | 
  
-SetGrid2MSL + | ToggleMuteProTrack |  
-SetGrid2MSL 1+ToggleMuteProTrack 1 | index(es) or name(s) | 
  
-SetGrid2Page + | ToggleMuteZone |  
-SetGrid2Page 1+ToggleMuteZone 0 | index(es) or name(s) | 
  
-SetGridSize + | ToggleMuteZoneOfProjector |  
-SetGridSize 8,5+ToggleMuteZoneOfProjector 1 | 1st projector | 
  
-SetGridView + | TogglePrevious |  
-SetGridView+TogglePrevious | "SWAP" button | 
  
-SetLimiterBeam + | ToggleSelectFixt |  
-SetLimiterBeam 5+ToggleSelectFixt | 
  
-SetLimiterDMX + | ToggleSelectProTrack |  
-SetLimiterDMX 5+ToggleSelectProTrack 1 | index(es) (1..N) or name(s) | 
  
-SetLimiterFlash + | ToggleSelectProjector |  
-SetLimiterFlash 4+ToggleSelectProjector 1 | index(es) (1..N) or name(s) | 
  
-SetLimiterHold + | ToggleSelectZone |  
-SetLimiterHold 3+ToggleSelectZone 1 | zone index, 1..N. | 
  
-SetLimiterPerGrid + | ToggleSoloProTrack |  
-SetLimiterPerGrid 10+ToggleSoloProTrack 1 | index(es) or name(s) | 
  
-SetLimiterPerZone + | ToggleUCenterPage |  
-SetLimiterPerZone 3+ToggleUCenterPage 1  | Relative command. +1 means next page, -1 means previous | 
  
-SetLimiterProfile + | ToggleUEditPage |  
-SetLimiterProfile 1+ToggleUEditPage 1 | Relative command. +1 means next page, -1 means previous | 
  
-SetLimiterShow + | ToggleUMaxPage |  
-SetLimiterShow 2+ToggleUMaxPage 1  | Relative command. +1 means next page, -1 means previous | 
  
-SetLocation + | ToggleUPreviewPage |  
-SetLocation 1, 0,0,0 // set one of 256 positions/locations (index 1..256, X,Y,Z as normalized values (0..1)+ToggleUPreviewPage 1  | Relative command. +1 means next page, -1 means previous | 
  
-SetMassSlider + | ToggleURightPage |  
-SetMassSlider 4+ToggleURightPage 1  | Relative command. +1 means next page, -1 means previous | 
  
-SetMidiLayer + | ToggleUToolPage |  
-SetMidiLayer 1 // 1..8.+ToggleUToolPage 1  | Relative command. +1 means next page, -1 means previous | 
  
-SetPage + | Transition |  
-SetPage 1+Transition Toggle  | ON, OFF, TOGGLE | 
  
-SetPhysicsCheckbox + | UnMuteZonesOfProjector |  
-SetPhysicsCheckbox ON+UnMuteZonesOfProjector 1 | projector index, 1..N. | 
  
-SetPlayListView + | UnSelectZone |  
-SetPlayListView+UnSelectZone 1 | zone index, 1..N. | 
  
-SetProTrackZones + | UnSelectZoneName |  
-SetProTrackZones 1, 1 // Track index/name, Zone name(es)/index(es)+UnSelectZoneName "Main Graphics" | enter Zone name | 
  
-SetSliderMSL + | UnSoloAllProTrack |  
-SetSliderMSL 1+UnSoloAllProTrack | 
  
-SetTimelineView + | UnSoloProTrack |  
-SetTimelineView+UnSoloProTrack 1 | index(es) or name(s) | 
  
-SetTransitionIndex + | UnmuteAllProTracks |  
-SetTransitionIndex 2+UnmuteAllProTracks | 
  
-SetTransitionTime + | UnmuteAllZone |  
-SetTransitionTime 0.1+UnmuteAllZone | 
  
-SetUCenterPage + | UnmuteProTrack |  
-SetUCenterPage 1 // set first page+UnmuteProTrack 1 | index(es) or name(s) | 
  
-SetUEditPage + | UnmuteZone |  
-SetUEditPage 1 // set first page+UnmuteZone 0 | index(es) or name(s) | 
  
-SetUMaxPage + | UnselectAllCue |  
-SetUMaxPage 1 // set first page+UnselectAllCue | 
  
-SetUPreviewPage + | UnselectAllFixt |  
-SetUPreviewPage 1 // set first page+UnselectAllFixt | 
  
-SetURightPage + | UnselectAllProTracks |  
-SetURightPage 1 // set first page+UnselectAllProTracks | 
  
-SetUToolPage + | UnselectAllProjectors |  
-SetUToolPage 1 // set first page+UnselectAllProjectors | 
  
-SetUniverseView + | UnselectAllZones |  
-SetUniverseView+UnselectAllZones | 
  
-SetVdjToChannelRatio + | UnselectFixt |  
-SetVdjToChannelRatio 0 // 0..100+UnselectFixt 0 | index(es) or name(s) | 
  
-SetWorkspacePageCount + | UnselectProTrack |  
-<internal commmand>+UnselectProTrack 1 | index(es) (1..N) or name(s) | 
  
-SetZoneMeshPointPos + | UnselectProjector |  
-SetZoneMeshPointPos 1, 1,1, 0,0 // Zone index, X node index, Y node index, X coordinate (-32K..32K), y coordinate+UnselectProjector 1 | index(es) (1..N) or name(s) | 
  
-SetZoneMuteMSL + | VLJFX |  
-SetZoneMuteMSL 1+VljFX 1, Toggle | index of FX-VLJ 1..4, and action: ON, OFF, TOGGLE | 
  
-SetZoneSelMSL + | Version |  
-SetZoneSelMSL 1+version | remote server will get exe file version | 
  
-ShiftFX + | VirtualLJ |  
-ShiftFX 1, 1 // Layer 1..4, delta+VirtualLJ Toggle | ON, OFF, TOGGLE | 
  
-ShiftFocus + | VisiblePoints |  
-ShiftFocus -5 // go back and forth on N cells+VisiblePoints 100 | 0..100 (percents) | 
  
-ShowHint + | VisiblePointsDelta |  
-ShowHint "Hello!" // show hint window in center of main window+VisiblePointsDelta 0 | 
  
-ShowItNowSMS + | WaitForAudioBeat |  
-ShowIsNowSMS 1+WaitForAudioBeat 1 | 
  
-ShowMasterHelpFile + | WaitForBeat |  
-ShowMasterHelpFile+WaitForBeat 7, 1 | 
  
-ShutDownWindows + | WaitForCellDown |  
-ShutDownWindows // require ShutDownWindows.exe application+WaitForCellDown 1 | 
  
-Size + | WaitForCellUp |  
-Size 100,100,100 // Size X,Y,Z axis+WaitForCellUp 1 | 
  
-SizeDelta + | WaitForChannel |  
-SizeDelta 0,0,0 // shift Size value+WaitForChannel 1 | 
  
-SizeIndex + | WaitForCueStart |  
-SizeDelta 0,0+WaitForCueStart 1 1 | 
  
-SizeX + | WaitForCueStop |  
-SizeX 100+WaitForCueStop 1 1 | 
  
-SizeY + | WaitForDmx |  
-SizeY 100+WaitForDmx 1 | 
  
-SizeZ + | WaitForEvent |  
-SizeZ 100+WaitForEvent "MyEventName" | 
  
-Sleep + | WaitForHotKey |  
-Sleep 1000+WaitForHotKey | waiting for hotkey assigned to this script in Code-tab | 
  
-SoloProTrack + | WaitForManualBeat |  
-SoloProTrack 1 // index(es) or name(s)+WaitForManualBeat 1 | 
  
-StartAudioRecord + | WaitForMidi |  
-StartAudioRecord+WaitForMidi 0x90, -1, -1 | 
  
-StartCell + | WaitForPageChange |  
-StartCell // start current cell+WaitForPageChange | 
  
-StartCode + | WaitForTC |  
-StartCode "MyCode" // put YOUR name of code+WaitForTC 15,30,0,0 | hours, minutes, seconds, ms | 
  
-StartCue + | WaitForTime |  
-StartCue 1,1+WaitForTime 15,30,0,0 | hours, minutes, seconds, ms | 
  
-StartPrevious + | WaitForTimePos |  
-StartPrevious // "Back" button+WaitForTimePos 21,00,00,00 | hours, minutes, seconds, ms | 
  
-StartTalkClient + | WaitForTimerBeat |  
-StartUdpTalkClient+WaitForTimerBeat 1 | 
  
-StartTalkServer + | Write |  
-StartUdpTalkServer+write | 
  
-StopAllAsync + | WriteLn |  
-StopAllAsync 0.5 // duration in seconds+writeln "Hello world!" | 
  
-StopAllNow + | ZoneFXTimeScale |  
-StopAllNow // no arguments+ZoneFXTimeScale 1,2,1 | Layer, Clock multipler, Metronome multiplier | 
  
-StopAllSync + | ZoneFXTimeScaleDelta |  
-StopAllSync  0.5 // duration in seconds+ZoneFXTimeScaleDelta 0,0,0,0  | 
  
-StopAudioRecord + | ZoneFXTimeShift |  
-StopAudioRecord+ZoneFXTimeShift 1,2,1 | Layer, Clock multipler, Metronome multiplier | 
  
-StopCell + | ZoneFXTimeShiftDelta |  
-StopCell // stop current cell+ZoneFXTimeShiftDelta 0,0,0,0  | 
  
-StopCode + | Zoom |  
-StopCode "MyCode"  // put YOUR name of code+Zoom 100 | value -100..100 | 
  
-StopCue + | ZoomDelta |  
-StopCue 1,1 +ZoomDelta 0 | shift zoom value | 
- +
-StopCueNow +
-StopCueNow 1, 1 // page 1..100, cue 1..100 +
- +
-StopCueSync +
-StopCueSync 1, 1, 0.5 // page 1..100, cue 1..60, time 0.. +
- +
-StopCueType +
-StopCueType 255 //Mask: 1-Image, 2-Timeline, 4-DMX, 8-Sequence, 16-Beams, 32-Capture +
- +
-StopFX +
-StopFX // One or more layers. 0 stop. Effect 1..100 +
- +
-StopFxCell +
-StopFXCell // Layer index, optional Cell index (relative, take into account scrollbar) +
- +
-StopOnBlackout +
-StopOnBlackout 1 +
- +
-StopProTrack +
-StopProTrack 1 // index(es) (1..N) or name(string). Can be used more than one argument +
- +
-StopProTrackFX +
-StopProTrackFX 1, 1 // Track index/name and FX line index(es). Counting from 1. If no arguments at all - stop all FX on all tracks +
- +
-StopTalkClient +
-StopUdpTalkClient +
- +
-StopTalkServer +
-StopUdpTalkServer +
- +
-StopTimeline +
-StopTimeline +
- +
-StoreZoneSelection +
-StoreZoneSelection +
- +
-StrobeSpeed +
-StrobeSpeed 0.2 // period, flicker per second +
- +
-StrobeSpeedDelta +
-StrobeSpeedDelta 0.1 // period, flicker per second +
- +
-SynchronizePlayerToBeat +
-SynchronizePlayerToBeat On  // options: On, Off, Toggle +
- +
-TapByCueClick +
-TapByCueClick On  // options: On,Off, Toggle +
- +
-TimelineAddMarker +
-TimelineAddMarker  +
- +
-TimelineEnableTC +
-TimelineEnableTC +
- +
-TimelineFirstTab +
-TimelineFirstTab +
- +
-TimelineJumpDelta +
-TimelineJumpDelta 1 // one second +
- +
-TimelineJumpToEnd +
-TimelineJumpToEnd +
- +
-TimelineJumpToStart +
-TimelineJumpToStart +
- +
-TimelineLastTab +
-TimelineLastTab +
- +
-TimelineMarker +
-TimelineMarker +
- +
-TimelineNextEditPoint +
-TimelineNextEditPoint +
- +
-TimelineNextMarker +
-TimelineNextMarker +
- +
-TimelineNextTab +
-TimelineNextTab +
- +
-TimelinePlay +
-TimelinePlay +
- +
-TimelinePlayFromMarker +
-TimelinePlayFromMarker "" +
- +
-TimelinePrevEditPoint +
-TimelinePrevEditPoint +
- +
-TimelinePrevMarker +
-TimelinePrevMarker +
- +
-TimelinePrevTab +
-TimelinePrevTab +
- +
-TimelineQuickSave +
-TimelineQuickSave +
- +
-TimelineSetPos +
-TimelineSetPos 10 // jump to second 10 +
- +
-TimelineSetTabIndex +
-TimelineSetTabIndex +
- +
-TimelineSetTabName +
-TimelineSetTabName "MyShow" +
- +
-TimelineSetViewRange +
-TimelineSetViewRange 1,5 // from s to 5 second +
- +
-TimelineShiftViewRange +
-TimelineShiftViewRange 1 // one second shift +
- +
-TimelineShowItNow +
-TimelineShowItNow 1 // set online mode for timeline editor +
- +
-TimelineStop +
-TimelineStop +
- +
-TimerBeat +
-TimerBeat +
- +
-ToggleCell +
-Toggle // start/stop current cell +
- +
-ToggleCue +
-ToggleCue 1,1 +
- +
-ToggleFX +
-ToggleFX 1 // Layer number: 1..4 +
- +
-ToggleMuteProTrack +
-ToggleMuteProTrack 1 // index(es) or name(s) +
- +
-ToggleMuteZone +
-ToggleMuteZone 0 // index(es) or name(s) +
- +
-ToggleMuteZoneOfProjector +
-ToggleMuteZoneOfProjector 1 // 1st projector +
- +
-TogglePrevious +
-TogglePrevious // "SWAP" button +
- +
-ToggleSelectFixt +
-ToggleSelectFixt +
- +
-ToggleSelectProTrack +
-ToggleSelectProTrack 1 // index(es) (1..N) or name(s) +
- +
-ToggleSelectProjector +
-ToggleSelectProjector 1 // index(es) (1..N) or name(s) +
- +
-ToggleSelectZone +
-ToggleSelectZone 1 // zone index, 1..N. +
- +
-ToggleSoloProTrack +
-ToggleSoloProTrack 1 // index(es) or name(s) +
- +
-ToggleUCenterPage +
-ToggleUCenterPage 1  // Relative command. +1 means next page, -1 means previous +
- +
-ToggleUEditPage +
-ToggleUEditPage 1 // Relative command. +1 means next page, -1 means previous +
- +
-ToggleUMaxPage +
-ToggleUMaxPage 1  // Relative command. +1 means next page, -1 means previous +
- +
-ToggleUPreviewPage +
-ToggleUPreviewPage 1  // Relative command. +1 means next page, -1 means previous +
- +
-ToggleURightPage +
-ToggleURightPage 1  // Relative command. +1 means next page, -1 means previous +
- +
-ToggleUToolPage +
-ToggleUToolPage 1  // Relative command. +1 means next page, -1 means previous +
- +
-Transition +
-Transition Toggle  // ON, OFF, TOGGLE +
- +
-UnMuteZonesOfProjector +
-UnMuteZonesOfProjector 1 // projector index, 1..N. +
- +
-UnSelectZone +
-UnSelectZone 1 // zone index, 1..N. +
- +
-UnSelectZoneName +
-UnSelectZoneName "Main Graphics" // enter Zone name +
- +
-UnSoloAllProTrack +
-UnSoloAllProTrack +
- +
-UnSoloProTrack +
-UnSoloProTrack 1 // index(es) or name(s) +
- +
-UnmuteAllProTracks +
-UnmuteAllProTracks +
- +
-UnmuteAllZone +
-UnmuteAllZone +
- +
-UnmuteProTrack +
-UnmuteProTrack 1 // index(es) or name(s) +
- +
-UnmuteZone +
-UnmuteZone 0 // index(es) or name(s) +
- +
-UnselectAllCue +
-UnselectAllCue +
- +
-UnselectAllFixt +
-UnselectAllFixt +
- +
-UnselectAllProTracks +
-UnselectAllProTracks +
- +
-UnselectAllProjectors +
-UnselectAllProjectors +
- +
-UnselectAllZones +
-UnselectAllZones +
- +
-UnselectFixt +
-UnselectFixt 0 // index(es) or name(s) +
- +
-UnselectProTrack +
-UnselectProTrack 1 // index(es) (1..N) or name(s) +
- +
-UnselectProjector +
-UnselectProjector 1 // index(es) (1..N) or name(s) +
- +
-VLJFX +
-VljFX 1, Toggle // index of FX-VLJ 1..4, and action: ON, OFF, TOGGLE +
- +
-Version +
-version // remote server will get exe file version +
- +
-VirtualLJ +
-VirtualLJ Toggle // ON, OFF, TOGGLE +
- +
-VisiblePoints +
-VisiblePoints 100 // 0..100 (percents) +
- +
-VisiblePointsDelta +
-VisiblePointsDelta 0 +
- +
-WaitForAudioBeat +
-WaitForAudioBeat 1 +
- +
-WaitForBeat +
-WaitForBeat 7, 1 +
- +
-WaitForCellDown +
-WaitForCellDown 1 +
- +
-WaitForCellUp +
-WaitForCellUp 1 +
- +
-WaitForChannel +
-WaitForChannel 1 +
- +
-WaitForCueStart +
-WaitForCueStart 1 1 +
- +
-WaitForCueStop +
-WaitForCueStop 1 1 +
- +
-WaitForDmx +
-WaitForDmx 1 +
- +
-WaitForEvent +
-WaitForEvent "MyEventName" +
- +
-WaitForHotKey +
-WaitForHotKey // waiting for hotkey assigned to this script in Code-tab +
- +
-WaitForManualBeat +
-WaitForManualBeat 1 +
- +
-WaitForMidi +
-WaitForMidi 0x90, -1, -1 +
- +
-WaitForPageChange +
-WaitForPageChange +
- +
-WaitForTC +
-WaitForTC 15,30,0,0 // hours, minutes, seconds, ms +
- +
-WaitForTime +
-WaitForTime 15,30,0,0 // hours, minutes, seconds, ms +
- +
-WaitForTimePos +
-WaitForTimePos 21,00,00,00 // hours, minutes, seconds, ms +
- +
-WaitForTimerBeat +
-WaitForTimerBeat 1 +
- +
-Write +
-write +
- +
-WriteLn +
-writeln "Hello world!" +
- +
-ZoneFXTimeScale +
-ZoneFXTimeScale 1,2,1 // Layer, Clock multipler, Metronome multiplier +
- +
-ZoneFXTimeScaleDelta +
-ZoneFXTimeScaleDelta 0,0,0,0  +
- +
-ZoneFXTimeShift +
-ZoneFXTimeShift 1,2,1 // Layer, Clock multipler, Metronome multiplier +
- +
-ZoneFXTimeShiftDelta +
-ZoneFXTimeShiftDelta 0,0,0,0  +
- +
-Zoom +
-Zoom 100 // value -100..100 +
- +
-ZoomDelta +
-ZoomDelta 0 // shift zoom value+
  
 + | 
beyond/pangoscript_commands.txt · Last modified: 2020/06/11 19:20 (external edit)

Page Tools

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki