User Tools
accessories:beam-analyzer-c100
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
accessories:beam-analyzer-c100 [2024/04/30 15:19] Bob Varkevisser [Technical Specifications] |
accessories:beam-analyzer-c100 [2024/12/28 13:07] (current) Bob Varkevisser [Download and installation of the software] |
||
|---|---|---|---|
| Line 10: | Line 10: | ||
| === Optical === | === Optical === | ||
| + | |< 100% 60% ^ 40% >| | ||
| ^ Parameter ^ Range ^ | ^ Parameter ^ Range ^ | ||
| | Optical power (*) (* *) | 0.1W - 100W | | | Optical power (*) (* *) | 0.1W - 100W | | ||
| - | | Accuracy on power measurement (Calibrated on RGB) | 1% | | + | | Accuracy on power measurement (Calibrated on 635nm / 520nm / 445nm). Other wavelengths can be added by the user | 1% | |
| | Resolution on divergence (by design) | 0.01 mrad | | | Resolution on divergence (by design) | 0.01 mrad | | ||
| | Typical accuracy (+/-) | 0.01 mrad | | | Typical accuracy (+/-) | 0.01 mrad | | ||
| Line 23: | Line 24: | ||
| (* *) A correct alignment should be done before setting the laser projector to maximum power. The user must follow the alignment procedure described in the User Manual to prevent damage to the system. | (* *) A correct alignment should be done before setting the laser projector to maximum power. The user must follow the alignment procedure described in the User Manual to prevent damage to the system. | ||
| - | === Mechanical === | + | === Mechanical === |
| + | |< 100% 60% ^ 40% >| | ||
| + | ^ Parameter ^ Value ^ | ||
| | Length x Width x Height (mm) (Without holder) | 105 x 75 x 59 | | | Length x Width x Height (mm) (Without holder) | 105 x 75 x 59 | | ||
| | Length x Width x Height (mm) (With holder) | 153 x 110 x 70 | | | Length x Width x Height (mm) (With holder) | 153 x 110 x 70 | | ||
| Line 30: | Line 33: | ||
| === Electrical === | === Electrical === | ||
| + | |< 100% 60% ^ 40% >| | ||
| + | ^ Parameter ^ Value ^ | ||
| | Typical Power consumption (USB 3.0) | 2W | | | Typical Power consumption (USB 3.0) | 2W | | ||
| Line 47: | Line 52: | ||
| To install the software, simply download and start the setup file “LBA_vX.XX_setup.exe” (X.XX is the version of the software). The latest version of the software can be found **[[https:// | To install the software, simply download and start the setup file “LBA_vX.XX_setup.exe” (X.XX is the version of the software). The latest version of the software can be found **[[https:// | ||
| + | [[https:// | ||
| ==== Shoot the laser beam on the beam analyzer ==== | ==== Shoot the laser beam on the beam analyzer ==== | ||
accessories/beam-analyzer-c100.1714483178.txt · Last modified: 2024/04/30 15:19 by Bob Varkevisser
