Differences

This shows you the differences between two versions of the page.

--- accessories:beam-analyzer-c100 [2024/04/30 17:01]
Bob Varkevisser
+++ accessories:beam-analyzer-c100 [2024/12/28 13:07] (current)
Bob Varkevisser [Download and installation of the software]
@@ Line 13: / Line 13: @@
 ^ Parameter ^ Range ^
 | Optical power (*) (* *) | 0.1W - 100W |
-| Accuracy on power measurement (Calibrated on RGB) | 1% |
+| Accuracy on power measurement (Calibrated on 635nm / 520nm / 445nm). Other wavelengths can be added by the user | 1% |
 | Resolution on divergence (by design) | 0.01 mrad |
 | Typical accuracy (+/-) | 0.01 mrad |
@@ Line 25: / Line 25: @@
 === Mechanical ===
-|< 100% 50% ^ 50% >|
+|< 100% 60% ^ 40% >|
+^ Parameter ^ Value ^
 | Length x Width x Height (mm) (Without holder) | 105 x 75 x 59 |
 | Length x Width x Height (mm) (With holder) | 153 x 110 x 70 |
@@ Line 32: / Line 33: @@
 === Electrical ===
-|< 100% 50% ^ 50% >|
+|< 100% 60% ^ 40% >|
+^ Parameter ^ Value ^
 | Typical Power consumption (USB 3.0) | 2W |
@@ Line 50: / Line 52: @@
 To install the software, simply download and start the setup file “LBA_vX.XX_setup.exe” (X.XX is the version of the software). The latest version of the software can be found **[[https://lightdiction.com/en/Downloads#lba|here]]**.
+[[https://download.pangolin.com/_Files/pointCue-for-beam-analyzer.bcue|Here you can download the testframe for BEYOND.]]
 ==== Shoot the laser beam on the beam analyzer ====

Complete Help Docs