Differences

This shows you the differences between two versions of the page.

--- beyond:blackout_and_pause_buttons [2019/07/30 16:51] – created Bob Varkevisser
+++ beyond:blackout_and_pause_buttons [2020/06/11 19:20] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
+====== Blackout and Pause buttons ======
+The Blackout and Pause buttons are found on the far right side of the BEYOND tool bar, just above the Laser Preview window. These functions can also be accessed on the Run menu of BEYOND.
+{{:beyond:tb_blackoutandpause.jpg|}}
+===== Blackout =====
+Pressing Blackout will stop all cues from playing, and will also reset the cue mode. This is the quickest and easiest way to stop all laser output.
+===== Pause =====
+Pressing the Pause button will Pause all BEYOND functions, including the Beam sequencer.
+===== Keyboard equivalents =====
+Blackout can be activated by pressing the ESC key on the computer keyboard. This is normally the top-left key on a computer keyboard.
+Pause mode can be activated by pressing the PAUSE key on the computer keyboard. This is normally the top-right key on a computer keyboard.