BEYOND Ultimate currently supports 40 Hardware controllers (FB4 or FB3) per installation. This requires a high-performance pc to run. However, there are a few options, as we do have a number of clients who regularly exceed 40 lasers, and even up to hundreds of lasers. This mainly looks like having multiple PCs running together.
The best way to create a timeline show for over 40 lasers is to create one very large timeline and zone file on one pc to program. A common workflow is to build a single huge zone file and a huge timeline for programming, BEYOND supports plenty of actual zones in a file and tracks to build it.
Once you are finished programming, load the zone file and timeline on each computer, then just delete the unneeded zones from each PC, depending on which lasers are connected to that PC.
Probably the easiest way to have two or more BEYOND computers run in sync is using Art-Net timecode. This allows you to start all running BEYOND instances at the same time.
You can broadcast Artnet timecode on a network that is separate from all the laser nets by plugging each pc into this separate network through additional network adapters on those computers. Then some master can send it all over the network, and all BEYOND instances can listen to it.
Otherwise, you may use a TC4000 or other SMPTE device for each computer and run separate audio tracks to each.
We recommend maintaining a PC as the “programming session” that doesn't connect to lasers but is just used as a preview in the system, so you can follow what the whole rig is doing.
Depending on PC performance, you may need to delete the unneeded tracks from each playback PC to reduce CPU usage.
You can also reduce CPU usage vastly by running the actual show from the Playlist, which is much more efficient on the PC than from the Timeline.
But simplistically, build it all on one install/ session, then spread that install to all PCs, and delete unneeded zones from each pc. Run from Playlist. Use Artnet Timecode.
Create your live workspace and save the file. Distribute this to each pc for each group of lasers, so that the workspace file is the same for them all. Then use the Beyond talk server to connect all “secondary” PC's to follow instructions from the “Primary” PC. So any triggers like a cue, master fx, midi command etc, are duplicated on all the “secondary” PC's.
For DMX-controlled shows, the process is very similar to live shows, except that for each zone, you will want to use the DMX server inside of Beyond. This lets each laser be individually controlled from a console using BEYOND as a server to supply data to the lasers.
Check out more on DMX Server:
There is an alternative option for DMX control of FB4's from a console directly, where the content is stored on the SD card on the FB4's and triggered from DMX directly, the limitations on this are setup is longer on the console, and the lasers look less smooth as dmx and artnet packets only really go up to about 30fps while lasers can run above 120fps regularly. DMX server smooths this out for you.
Things to keep in mind when making lasershows with this many lasers:
This is a lot of work for the computer to process. You will want and need a high-performance PC, and you will need to use parametric images when making your cues. They are very efficient and help with performance:
Note that:
Each computer needs its own separate BEYOND license
Each computer and group of lasers needs to be on an independent network from each other, so each computer can only see up to 40 FB4s on the network.
It is also recommended that you power up the lasers in the order you want them to be in. BEYOND this will make zoning and assigning FB4s to zones much faster.
We hope this helps clear up and explain how you can use Pangolin products to control more than 40 lasers! Let us know if you have any further questions!