PangoScript Commands

Function Code Comments
AddSmsAddSMS “This is my demo message”
AngleAngle 0,0,0X,Y,Z angles in degrees
AngleDeltaAngleDelta 0,0,0increment X,Y,Z angles in degrees
AngleXAngleX 0degree
AngleYAngleY 0degree
AngleZAngleZ 0degree
AnimatePropAnimateProp “”, 0,1,1000“variable”, From, To, Duration MS
AnimatePropDeltaAnimatePropDelta “”, 10,1000“variable”, Delta, Duration MS
AnimationSpeedAnimationSpeed 100speed in %. Zero full stop.
AnimationSpeedDeltaAnimationSpeedDelta 0
AudioBeatAudioBeat
AutostartAutoStart
BeatResyncBeatResync
BeatTapBeatTap
BlackOutBlackOut
BrightnessBrightness 1000..100 (percents)
BrightnessDeltaBrightnessDelta 0
CaptureToClipboardCaptureToClipboard
ChannelOutChannelOut 1, 1000set first channel to 1000 (max value)
ClickFXStopAll
ClickFXTabModeClickFXTabMode 11-Master, 2-Cue, 3-Zone, 4-ProTrack
ClickFlashClickFlash optional argument: 1 or 2 (Grid number)
ClickFxVljClickFxVlj 1Toggle first FX-VLJ
ClickLCTabModeClickLCTabMode 11-Master, 2-Cue, 3-Zone, 4-ProTrack
ClickLiveClickLive optional argument: 1 or 2 (Grid number)
ClickLockSizeClickLockSize 1 0,1,2 Off, On, toggle
ClickRestartClickRestart optional argument: 1 or 2 (Grid number)
ClickScrollAClickScrollA -5scroll speed, recommended -5..-1, or 1..5. Zero will stop.
ClickScrollAniSpeedClickScrollAniSpeed -5scroll speed, recommended -5..-1, or 1..5. Zero will stop.
ClickScrollBClickScrollB -5scroll speed, recommended -5..-1, or 1..5. Zero will stop.
ClickScrollColorClickScrollColor -5scroll speed, recommended -5..-1, or 1..5. Zero will stop.
ClickScrollFadeClickScrollFade -5scroll speed, recommended -5..-1, or 1..5. Zero will stop.
ClickScrollGClickScrollG -5scroll speed, recommended -5..-1, or 1..5. Zero will stop.
ClickScrollHueClickScrollHue -5scroll speed, recommended -5..-1, or 1..5. Zero will stop.
ClickScrollHueShiftClickScrollHueShift -5scroll speed, recommended -5..-1, or 1..5. Zero will stop.
ClickScrollRClickScrollR -5scroll speed, recommended -5..-1, or 1..5. Zero will stop.
ClickScrollSaturationClickScrollSaturation -5scroll speed, recommended -5..-1, or 1..5. Zero will stop.
ClickScrollScanRateClickScrollScanRate -5scroll speed, recommended -5..-1, or 1..5. Zero will stop.
ClickScrollSizeClickScrollSize -5scroll speed, recommended -5..-1, or 1..5. Zero will stop.
ClickScrollVPointsClickScrollVPoints -5scroll speed, recommended -5..-1, or 1..5. Zero will stop.
ClickScrollZoomClickScrollZoom -5scroll speed, recommended -5..-1, or 1..5. Zero will stop.
ClickSelectClickSelect optional argument: 1 or 2 (Grid number)
ClickSoloFlashClickSoloFlash optional argument: 1 or 2 (Grid number)
ClickTCTabModeClickTCTabMode 11-Master, 2-Cue, 3-Zone, 4-ProTrack
ClickToggleClickToggle optional argument: 1 or 2 (Grid number)
ClickTrackClickTrack optional argument: 1 or 2 (Grid number)
CloseUmaxCloseUmax
CodeColorMarkerCodeColorMarker 0x00FF00green color marker
CodeNameCodeName “MyCode”define name of
CodeShortcutCodeShortcut “Ctrl+D”
ColorBGRColorBGR 0x0000FFblue color
ColorOnColorOn 11-enabled, 0-disabled
ColorRGBColorRGB 0x0000FFred color,
ColorSliderColorSlider 00..255
ColorSliderDeltaColorSliderDelta 0
ControlCueControlCue 1,1
ControlFromFxTabControlFromFxTab
ControlFromLcTabControlFromLcTab
ControlFromTcTabControlFromTcTab
ControlFromUIControlFromUI
ControlMasterControlMaster
ControlProTrackControlProTrack 1
ControlProjectorControlProjector 1
ControlSelCuesControlSelCues
ControlSelProTracksControlSelProTracks
ControlSelZonesControlSelZones
ControlZoneControlZone 1name as “Main Graphics”, or zone number 1…N
CueDownCuedown 1,1page 1..100, cue 1..100
CueUpCueUp 1,1page 1..100, cue 1..100
DecreaseTriggerDecreaseTrigger 0,100,“MyLabel”Min Value, Max Value, Label name
DefineDmxTriggerDefineDmxTrigger 1Channel
DefineMidiTriggerDefineMidiTrigger 0xC0, 0x00MIDI Cmmand, MIDI Data 1, Trigger Name (optional), MIDI Dev index from 0 to 3 (optional), but default - any
DefineTcTriggerDefineTCTrigger “TC Test”hour, minute, second
DefineTriggerDefineTrigger “2+2”expression…
DeletePropAniDeletePropAni“variable”, [“variable”,..]
DisableLaserOutputDisableLaserOutput
DisplayPopupDisplayPopup “Hello world!”
DisplayPopupOnTopDisplayPopupOnTop “Hello world!”
DisplayPreviewDisplayPreview “Hello world!”, 0x0000ff
DmxInMuteDmxInMute 1, 255Channel index, 0 or 1; or ChannelIndex
DmxOutDmxOut 1, 255set first DMX OUT channel to 255 (max value)
DmxOutRangeDmxOutRange 1, 255set first DMX OUT channel
DropFXDropFX 1,1, 1000Layer, Index, duration ms
EchoEcho 2 0-none, 1-ok/error, 2-echo of input plus ok/error
EnableDmxInEnableDmxIn Toggle ON, OFF, TOGGLE
EnableFb3StyleDmxInEnableFb3StyleDmxIn 1On(1), Off(0), Toggle(2)
EnableLaserOutputEnableLaserOutput
ExecCmdExecCmd “Blackout”
ExitExit
ExitBEYONDExitBEYONDExit from BEYOND
FXFX 0,0,0,0One or more layers. 0 stop. Effect 1..100
FXActionFXAction 100,100,100,100One or more layers. Set effect action from 0% to 100%
FXCellClickFXCellClick 1,1
FXCellDownFXCellDown 1, 1Layer number: 1..4, Effect number
FXClickFXClick 1,1
FXScrollFXScroll 1
FXScrollDeltaFXScrollDelta 8
FXTimeScaleAxFXTimeScaleAx 1,2,1Layer, Mask (1,2,3), multiplier
FXTimeScaleAxResetFXTimeScaleAxReset 1,2Layer, Mask (1,2,3)
FXTimeScaleDeltaAxFXTimeScaleDeltaAx 1,2,1Layer, Mask (1,2,3), increment value
FXTimeSyncFXTimeSync 1,1Layer, Source (1-Master, 2-Own time)
FocusCellFocusCell 1,1Column (1..10), Row (1..6)
FocusCellIndexFocusCellIndex 1cell index, 1..60
FocusProTrackFocusProTrack 1Track index/name
FocusProjectorFocusProjector 1Projector index, 1..N.
FocusZoneFocusZone 1zone index, 1..N.
GetFxControlGetFxControl
GetLiveControlGetLiveControl
GetPageGetPage
GetTimeControlGetPage
GoGridModeGoGridMode
GoPlayListModeGoPlayListMode
GoTimelineModeGoTimelineMode
GoUniverseModeGoUniverseMode
GroupCueGroupCue
Hellohelloanswer will be Hello!
HoldClickHoldClick ON
HtmlBodyHtmlBody
HtmlClearBodyHtmlClearBody
HtmlClearHeadHtmlClearHead
HtmlHeadHtmlHead
HtmlHideHtmlHide
HtmlUpdateHtmlUpdate
HueHue 0
HueDeltaHueDelta 0
HueShiftHueShift 0
HueShiftDeltaHueShiftDelta 0
InRangeTriggerInRangeTrigger 0,100,“MyLabel”Min Value, Max Value, Label name
InRangeTriggerCmdInRangeTriggerCmd 0,100,“Blackout”Min Value, Max Value, Command
IncreaseTriggerIncreaseTrigger 0,100,“MyLabel”Min Value, Max Value, Label name
InvertPlayersTimeInvertPlayersTime
InvertProTrackTimeInvertProTrackTime
InvertRotationXInvertRotationX
InvertRotationYInvertRotationY
InvertRotationZInvertRotationZ
LessThanTriggerLessThanTrigger 0,“MyLabel”Value, Label name
LinePerCycleLinePerCycle 24
LoadCueLoadCue “c:\MyAnimationFile.bani”Enter correct file name!
LoadCueFromBlob<internal commmand>
LoadPlaylistLoadPlaylist “c:\MyPlaylist.BeyondSL”
LoadWorkspaceLoadWorkspace “c:\MyWorkspace.BeyondWorkspace”Enter correct file name!
LoadZoneFromBlob<internal commmand>
MakeSecuredFileMakeSecuredFile “Input file name”, “Output file name”, ClientHardwareSerial
ManualBeatManualBeat
MasterAudioVolumeMasterAudioVolume 100in percents
MasterAudioVolumeMuteMasterAudioVolumeMute 1On(1), Off(0), Toggle(2)
MasterClockShiftMasterClockShift 0in seconds
MasterCueLcSpeedMasterCueLcSpeed 100in percents
MasterCueSpeedMasterCueSpeed 100in percents
MasterEffectClockShiftMasterEffectClockShift 0in seconds
MasterEffectMetroShiftMasterEffectMetroShift 0in beats
MasterFXSpeedMasterFXSpeed 100in percents
MasterLCSpeedMasterLCSpeed 100in percents
MasterMetroShiftMasterMetroShift 0in beats
MasterPauseMasterPause Toggle ON, OFF, TOGGLE
MasterPauseTimeMasterPauseTime 1000time in milliseconds
MasterShowBrightnessMasterShowBrightness 100in percents
MasterShowSpeedMasterShowSpeed 100in percents
MasterSpeedMasterSpeed 1From zero to one
MasterTransitionMasterTransition ON
MasterTransitionIndexMasterTransitionIndex 2
MasterTransitionTimeMasterTransitionTime 0.1
MasterZoneFxSpeedMasterZoneFxSpeed 100in percents
MeshCurveMeshCurve 1,2,3quad-spline between point 1,2 and 3
MeshPointMeshPoint -100,-100, 0, “LeftBottom”
MeshPointChanMeshPointChan 1,0,0
MeshPolygonMeshPolygon 1,2connect 1st and 2nd point
MeshRectMeshRect 1,2,3,4
MeshSplineMeshSpline 1,2,3,4cubic-spline based on 4 points. 1,4 bases, 2,3 “handles”
MeshTriangleMeshTriangle 1,2,3
MidiOutMidiOut 0x90, 0x40, 0x7F
MidiOutLongMidiOutLong 0x90, 0x40, 0x7F
MidiSysexAddMidiSysexAdd “F0477F” add data to Systex buffer, string must represent sequence of hex values. In addition, you may use integer parameters
MidiSysexSendMidiSysexSendsend prepared sysex buffer
MidiSysexStartMidiSysexStart clear Sysex buffer
MoreThanTriggerMoreThanTrigger 0,“MyLabel”Value, Label name
MoveFocusMoveFocus -1,0number of cells to go horizontally and vertically
MulFXMulAxMulFXMulAx 1, 3, 1Multiply multiplier… :-) Layer number: 1..4, Mask (1 is clock, 2 is beat, 3 is clock and beat), Value of multiplier
MultiCueMultiCue
MuteAllProTracksMuteAllProTracks
MuteProTrackMuteProTrack 1index(es) or name(s)
MuteSelectedMuteSelected
MuteSelectedZonesMuteSelectedZones OFFON, OFF, TOGGLE
MuteZoneMuteZone 0index(es) or name(s)
MuteZonesOfProjectorMuteZonesOfProjector 1projector index, 1..N.
OneCueOneCueone cue per workspace
OnePerOnePerone cue per projectoin zone
OscOutOscOut “/beam1/xy”, -5, 100set beam 1 position to [-5,100]
OscOutTTSOscOutTTS “”,““Address, Type Tag String, Arguments (optional)
OutOfRangeTriggerOutOfRangeTrigger 0,100,”MyLabel”Min Value, Max Value, Label name
OutOfRangeTriggerCmdOutOfRangeTriggerCmd 0,100,“Blackout”Min Value, Max Value, Command
Passwordpassword “enter pasword here”
PasteToCuePasteToCue
PauseCuePauseCue 1,1, TOGGLEpage, cue, action (ON, OFF, TOGGLE)
PlayListFirstPlayListFirst
PlayListLastPlayListLast
PlayListNextPlayListNext
PlayListPlayPlayListPlay
PlayListPrevPlayListPrev
PlayListSetPosPlayListSetPos 1
PlayListSetTimePlayListSetTime 0
PlayListStopPlayListStop
PlayTimelinePlayTimeline
PlayersDiskPlayersDisk 1, 0.1
PlayersDiskShiftPlayersDiskShift 0.1
PlayersResetJumpPlayersResetJump
PlayersSetJumpPlayersSetJump
PlayersSetLoopPlayersSetLoop
PositionPosition 0,0,0X,Y,Z position.
PositionDeltaPositionDelta 0,0,0X,Y,Z
PositionIndexPositionIndex 1,0one axiz only: 1 is X, 2 is Y, 3 is Z. Second paramater is Value, 0 center, 100 is max
PositionXPositionX 0 -100..100
PositionYPositionY 0 -100..100
PositionZPositionZ 0 -100..100
PreviewMasterPreviewMaster
PreviewNxNPreviewNxN 11 - laser, 2 - 2×2, 3 - 3×3, 4 - 4×4
ProTrackDiskProTrackDisk 1, 0.1
ProTrackDiskShiftProTrackDiskShift 0.1
ProTrackResetJumpProTrackResetJump
ProTrackSetJumpProTrackSetJump
ProTrackSetLoopProTrackSetLoop
ProjectionZonesDialogProjectionZonesDialog
PulseEventPulseEvent “MyEventName”
QLogQLog “My message to QLog tab”
RGBARGBA 255,255,255,255R,G,B,Alpha. 0..255
RGBADeltaRGBADelta 0,0,0,0
ReStartCellRestartCellrestart current cell
ReStoreZoneSelectionReStoreZoneSelection
RebootConnectedFB4RebootConnectedFB4If you need to use this command then please contact Pangolin (report@pangolin.com) and tell what is wrong with your FB4. Thanks.
RefreshDmxInRefreshDmxInactivate update of DMX IN reactions, independently on data changed or no
RegisterOscFeedbackRegisterOscFeedback “/beyond/master/brightness”, “master.brightness”
ResetCuesFXResetCuesFX
ResetFxTimingResetFxTiming
ResetLCTabResetLCTab
ResetLiveControlResetLiveControl
ResetMasterFXResetMasterFX
ResetMidiFeedbackResetMidiFeedback
ResetOscFeedbackResetOscFeedback
ResetPositionResetPosition
ResetProTrackFXResetProTrackFX
ResetRotationResetRotation
ResetRotationXResetRotationX
ResetRotationYResetRotationY
ResetRotationZResetRotationZ
ResetZonesFXResetZonesFX
RestartRestart
RestartCueRestartCue 1,1page, cue
RestorePlayerRestorePlayer
ResyncByCueClickResyncByCueClick On options: On, Off, Toggle
RotoSpeedRotoSpeed 0,0,0 rotation speed by X,Y,Z axis. degree.
RotoSpeedDeltaRotoSpeedDelta 0,0,0increment of rotation speed. X,Y,Z axis.
RotoSpeedXRotoSpeedX 0rotation speed, degree
RotoSpeedYRotoSpeedY 0rotation speed, degree
RotoSpeedZRotoSpeedZ 0rotation speed, degree
RunAppRunApp “C:\Windows\Notepad.exe”, ““full exe file name, parameters
SaturationSaturation 0
SaturationDeltaSaturationDelta 0
ScanRateScanRate 100
ScanRateDeltaScanRateDelta 0
SelectAllCatSelectAllCat
SelectAndFocusZoneSelectAndFocusZone 1zone index, 1..N.
SelectCatSelectCat 1category index, 1..N.
SelectCatNameSelectCatName “Graphics”define correct Category name.
SelectCueSelectCue “Cue01”Enter correct Cue name!
SelectFixtSelectFixt 0index(es) or name(s)
SelectGridSelectGrid 11-main grid, 2-grid at bottom. 0-recently active
SelectMidiSelectMidi 1select MIDI device pair, 1..4.
SelectNextCatSelectNextCat
SelectNextCatGrid1SelectNextCatGrid1
SelectNextPageSelectNextPage
SelectNextPageGrid1SelectNextPageGrid1
SelectNextTabSelectNextTab
SelectNextTabGrid1SelectNextTabGrid1
SelectPageSelectPage 1tab index, 1..N.
SelectPageNameSelectPageName “Graphics”define Page name!
SelectPrevCatSelectPrevCat
SelectPrevCatGrid1SelectPrevCatGrid1
SelectPrevPageSelectPrevPage
SelectPrevPageGrid1SelectPrevPageGrid1
SelectPrevTabSelectPrevTab
SelectPrevTabGrid1SelectPrevTabGrid1
SelectProTrackSelectProTrack 1index(es) (1..N) or name(string). Can be used more than one argument
SelectProjectorSelectProjector 1index(es) (1..N) or name(string). Can be used more than one argument
SelectTabSelectTab 1 tab index, 1..N.
SelectTabNameSelectTabName “Graphics”define Page name!
SelectZoneSelectZone 1zone index, 1..N.
SelectZoneNameSelectZoneName “Main Graphics”enter Zone name
SetActiveGridSetActiveGrid 1or 2
SetAttractionSliderSetAttractionSlider 10
SetAudioGainSetAudioGain 101..15
SetAudioInGainSetAudioInGain 101 is min, 15 is max, 10 default
SetAudioInReleaseSetAudioInRelease 751 is min, 99 is max (slowest) 75 is default
SetAudioReleaseSetAudioRelease 751..99
SetBpmSetBpm 120
SetBpmDeltaSetBpmDelta 1
SetButtonMSLSetButtonMSL 1
SetChannelToChannelRatioSetChannelToChannelRatio 00..100
SetCueCaptionColorSetCueCaptionColor 1,2, 0x0000FF page 1, cue 2, color (windows, 24bit color)
SetDmxEditorChannelSetDmxEditorChannel 1, 128
SetDmxToChannelRatioSetDmxToChannelRatio 00..100
SetEffectChannelActionSetEffectChannelAction 0 0..100
SetFFTToChannelRatioSetFFTToChannelRatio 00..100
SetFXSetFX 1, 1Layer number: 1..4, Effect index: 1..100
SetFX1MSLSetFX1MSL 1
SetFX2MSLSetFX2MSL 1
SetFX3MSLSetFX3MSL 1
SetFX4MSLSetFX4MSL 1
SetFX5MSLSetFX5MSL 1
SetFX6MSLSetFX6MSL 1
SetFXActionSetFXAction 1, 100Layer number: 1..4, Action 0..100 percent
SetFXAction1SetFXAction1 100Action 0..100 percent
SetFXAction2SetFXAction2 100Action 0..100 percent
SetFXAction3SetFXAction3 100Action 0..100 percent
SetFXAction4SetFXAction4 100Action 0..100 percent
SetFXAction5SetFXAction5 100Action 0..100 percent
SetFXAction6SetFXAction6 100Action 0..100 percent
SetFXAction7SetFXAction7 100Action 0..100 percent
SetFXAction8SetFXAction8 100Action 0..100 percent
SetFXMulSetFXMul 1, 1,1Layer number: 1..4, Multiplier 1 - default value for clock and metronome
SetFXMulAxSetFXMulAx 1, 3, 1Layer number: 1..4, Mask (1 is clock, 2 is beat, 3 is clock and beat), Value of multiplier
SetFXMuteSetFXMute 1, 0Layer number: 1..4, 0-Off, 1-On, 2-Toggle
SetFrictionSliderSetFrictionSlider 10
SetGrid1MSLSetGrid1MSL 1
SetGrid1PageSetGrid1Page 1
SetGrid2MSLSetGrid2MSL 1
SetGrid2PageSetGrid2Page 1
SetGridSizeSetGridSize 8,5
SetGridViewSetGridView
SetLimiterBeamSetLimiterBeam 5
SetLimiterDMXSetLimiterDMX 5
SetLimiterFlashSetLimiterFlash 4
SetLimiterHoldSetLimiterHold 3
SetLimiterPerGridSetLimiterPerGrid 10
SetLimiterPerZoneSetLimiterPerZone 3
SetLimiterProfileSetLimiterProfile 1
SetLimiterShowSetLimiterShow 2
SetLocationSetLocation 1, 0,0,0set one of 256 positions/locations (index 1..256, X,Y,Z as normalized values (0..1)
SetMassSliderSetMassSlider 4
SetMidiLayerSetMidiLayer 11..8.
SetPageSetPage 1
SetPhysicsCheckboxSetPhysicsCheckbox ON
SetPlayListViewSetPlayListView
SetProTrackZonesSetProTrackZones 1, 1Track index/name, Zone name(es)/index(es)
SetSliderMSLSetSliderMSL 1
SetTimelineViewSetTimelineView
SetTransitionIndexSetTransitionIndex 2
SetTransitionTimeSetTransitionTime 0.1
SetUCenterPageSetUCenterPage 1set first page
SetUEditPageSetUEditPage 1set first page
SetUMaxPageSetUMaxPage 1set first page
SetUPreviewPageSetUPreviewPage 1set first page
SetURightPageSetURightPage 1set first page
SetUToolPageSetUToolPage 1set first page
SetUniverseViewSetUniverseView
SetVdjToChannelRatioSetVdjToChannelRatio 00..100
SetWorkspacePageCount<internal commmand>
SetZoneMeshPointPosSetZoneMeshPointPos 1, 1,1, 0,0Zone index, X node index, Y node index, X coordinate (-32K..32K), y coordinate
SetZoneMuteMSLSetZoneMuteMSL 1
SetZoneSelMSLSetZoneSelMSL 1
ShiftFXShiftFX 1, 1Layer 1..4, delta
ShiftFocusShiftFocus -5go back and forth on N cells
ShowHintShowHint “Hello!”show hint window in center of main window
ShowItNowSMSShowIsNowSMS 1
ShowMasterHelpFileShowMasterHelpFile
ShutDownWindowsShutDownWindowsrequire ShutDownWindows.exe application
SizeSize 100,100,100Size X,Y,Z axis
SizeDeltaSizeDelta 0,0,0shift Size value
SizeIndexSizeDelta 0,0
SizeXSizeX 100
SizeYSizeY 100
SizeZSizeZ 100
SleepSleep 1000
SoloProTrackSoloProTrack 1index(es) or name(s)
StartAudioRecordStartAudioRecord
StartCellStartCellstart current cell
StartCodeStartCode “MyCode”put YOUR name of code
StartCueStartCue 1,1
StartPreviousStartPrevious“Back” button
StartTalkClientStartUdpTalkClient
StartTalkServerStartUdpTalkServer
StopAllAsyncStopAllAsync 0.5duration in seconds
StopAllNowStopAllNowno arguments
StopAllSyncStopAllSync 0.5duration in seconds
StopAudioRecordStopAudioRecord
StopCellStopCellstop current cell
StopCodeStopCode “MyCode” put YOUR name of code
StopCueStopCue 1,1
StopCueNowStopCueNow 1, 1page 1..100, cue 1..100
StopCueSyncStopCueSync 1, 1, 0.5page 1..100, cue 1..60, time 0..
StopCueTypeStopCueType 255 Mask: 1-Image, 2-Timeline, 4-DMX, 8-Sequence, 16-Beams, 32-Capture
StopFXStopFXOne or more layers. 0 stop. Effect 1..100
StopFxCellStopFXCellLayer index, optional Cell index (relative, take into account scrollbar)
StopOnBlackoutStopOnBlackout 1
StopProTrackStopProTrack 1index(es) (1..N) or name(string). Can be used more than one argument
StopProTrackFXStopProTrackFX 1, 1Track index/name and FX line index(es). Counting from 1. If no arguments at all - stop all FX on all tracks
StopTalkServerStopUdpTalkServer
StopTimelineStopTimeline
StoreZoneSelectionStoreZoneSelection
StrobeSpeedStrobeSpeed 0.2period, flicker per second
StrobeSpeedDeltaStrobeSpeedDelta 0.1period, flicker per second
SynchronizePlayerToBeatSynchronizePlayerToBeat On options: On, Off, Toggle
TapByCueClickTapByCueClick On options: On,Off, Toggle
TimelineAddMarkerTimelineAddMarker
TimelineEnableTCTimelineEnableTC
TimelineFirstTabTimelineFirstTab
TimelineJumpDeltaTimelineJumpDelta 1one second
TimelineJumpToEndTimelineJumpToEnd
TimelineJumpToStartTimelineJumpToStart
TimelineLastTabTimelineLastTab
TimelineMarkerTimelineMarker
TimelineNextEditPointTimelineNextEditPoint
TimelineNextMarkerTimelineNextMarker
TimelineNextTabTimelineNextTab
TimelinePlayTimelinePlay
TimelinePlayFromMarkerTimelinePlayFromMarker ”“
TimelinePrevEditPointTimelinePrevEditPoint
TimelinePrevMarkerTimelinePrevMarker
TimelinePrevTabTimelinePrevTab
TimelineQuickSaveTimelineQuickSave
TimelineSetPosTimelineSetPos 10jump to second 10
TimelineSetTabIndexTimelineSetTabIndex
TimelineSetTabNameTimelineSetTabName “MyShow”
TimelineSetViewRangeTimelineSetViewRange 1,5from s to 5 second
TimelineShiftViewRangeTimelineShiftViewRange 1one second shift
TimelineShowItNowTimelineShowItNow 1set online mode for timeline editor
TimelineStopTimelineStop
TimerBeatTimerBeat
ToggleCellTogglestart/stop current cell
ToggleCueToggleCue 1,1
ToggleFXToggleFX 1Layer number: 1..4
ToggleMuteProTrackToggleMuteProTrack 1index(es) or name(s)
ToggleMuteZoneToggleMuteZone 0index(es) or name(s)
ToggleMuteZoneOfProjectorToggleMuteZoneOfProjector 11st projector
TogglePreviousTogglePrevious“SWAP” button
ToggleSelectFixtToggleSelectFixt
ToggleSelectProTrackToggleSelectProTrack 1index(es) (1..N) or name(s)
ToggleSelectProjectorToggleSelectProjector 1index(es) (1..N) or name(s)
ToggleSelectZoneToggleSelectZone 1zone index, 1..N.
ToggleSoloProTrackToggleSoloProTrack 1index(es) or name(s)
ToggleUCenterPageToggleUCenterPage 1 Relative command. +1 means next page, -1 means previous
ToggleUEditPageToggleUEditPage 1Relative command. +1 means next page, -1 means previous
ToggleUMaxPageToggleUMaxPage 1 Relative command. +1 means next page, -1 means previous
ToggleUPreviewPageToggleUPreviewPage 1 Relative command. +1 means next page, -1 means previous
ToggleURightPageToggleURightPage 1 Relative command. +1 means next page, -1 means previous
ToggleUToolPageToggleUToolPage 1 Relative command. +1 means next page, -1 means previous
TransitionTransition Toggle ON, OFF, TOGGLE
UnMuteZonesOfProjectorUnMuteZonesOfProjector 1projector index, 1..N.
UnSelectZoneUnSelectZone 1zone index, 1..N.
UnSelectZoneNameUnSelectZoneName “Main Graphics”enter Zone name
UnSoloAllProTrackUnSoloAllProTrack
UnSoloProTrackUnSoloProTrack 1index(es) or name(s)
UnmuteAllProTracksUnmuteAllProTracks
UnmuteAllZoneUnmuteAllZone
UnmuteProTrackUnmuteProTrack 1index(es) or name(s)
UnmuteZoneUnmuteZone 0index(es) or name(s)
UnselectAllCueUnselectAllCue
UnselectAllFixtUnselectAllFixt
UnselectAllProTracksUnselectAllProTracks
UnselectAllProjectorsUnselectAllProjectors
UnselectAllZonesUnselectAllZones
UnselectFixtUnselectFixt 0index(es) or name(s)
UnselectProTrackUnselectProTrack 1index(es) (1..N) or name(s)
UnselectProjectorUnselectProjector 1index(es) (1..N) or name(s)
VLJFXVljFX 1, Toggleindex of FX-VLJ 1..4, and action: ON, OFF, TOGGLE
Versionversionremote server will get exe file version
VirtualLJVirtualLJ ToggleON, OFF, TOGGLE
VisiblePointsVisiblePoints 1000..100 (percents)
VisiblePointsDeltaVisiblePointsDelta 0
WaitForAudioBeatWaitForAudioBeat 1
WaitForBeatWaitForBeat 7, 1
WaitForCellDownWaitForCellDown 1
WaitForCellUpWaitForCellUp 1
WaitForChannelWaitForChannel 1
WaitForCueStartWaitForCueStart 1 1
WaitForCueStopWaitForCueStop 1 1
WaitForDmxWaitForDmx 1
WaitForEventWaitForEvent “MyEventName”
WaitForHotKeyWaitForHotKeywaiting for hotkey assigned to this script in Code-tab
WaitForManualBeatWaitForManualBeat 1
WaitForMidiWaitForMidi 0x90, -1, -1
WaitForPageChangeWaitForPageChange
WaitForTCWaitForTC 15,30,0,0hours, minutes, seconds, ms
WaitForTimeWaitForTime 15,30,0,0hours, minutes, seconds, ms
WaitForTimePosWaitForTimePos 21,00,00,00hours, minutes, seconds, ms
WaitForTimerBeatWaitForTimerBeat 1
Writewrite
WriteLnwriteln “Hello world!”
ZoneFXTimeScaleZoneFXTimeScale 1,2,1Layer, Clock multipler, Metronome multiplier
ZoneFXTimeScaleDeltaZoneFXTimeScaleDelta 0,0,0,0
ZoneFXTimeShiftZoneFXTimeShift 1,2,1Layer, Clock multipler, Metronome multiplier
ZoneFXTimeShiftDeltaZoneFXTimeShiftDelta 0,0,0,0
ZoomZoom 100value -100..100
ZoomDeltaZoomDelta 0shift zoom value