Differences

This shows you the differences between two versions of the page.

--- beyond:pangoscript_commands [2020/05/26 12:39]
Bob Varkevisser
+++ beyond:pangoscript_commands [2020/06/11 19:20] (current)
@@ Line 1: / Line 1: @@
-PangoScript Commands
+====== PangoScript Commands ======
-^ Function ^ Code ^ Description ^
-| AddSMS | AddSMS "This is my demo message" | |
-| Angle | Angle 0,0,0 | X,Y,Z angles in degrees |
-AngleDelta
-AngleDelta 0,0,0 // increment X,Y,Z angles in degrees
-AngleX
-AngleX 0 // degree
-AngleY
-AngleY 0 // degree
-AngleZ
-AngleZ 0 // degree
-AnimateProp
-AnimateProp "", 0,1,1000 // "variable", From, To, Duration MS
-AnimatePropDelta
-AnimatePropDelta "", 10,1000 // "variable", Delta, Duration MS
-AnimationSpeed
-AnimationSpeed 100 // speed in %. Zero full stop.
-AnimationSpeedDelta
-AnimationSpeedDelta 0
-AudioBeat
-AudioBeat
-Autostart
-AutoStart
-BeatResync
-BeatResync
-BeatTap
-BeatTap
-BlackOut
-BlackOut
-Brightness
-Brightness 100 // 0..100 (percents)
-BrightnessDelta
-BrightnessDelta 0
-CaptureToClipboard
-CaptureToClipboard
-ChannelOut
-ChannelOut 1, 1000 // set first channel to 1000 (max value)
-ClickFXStopAll
-ClickFXStopAll
-ClickFXTabMode
-ClickFXTabMode 1 // 1-Master, 2-Cue, 3-Zone, 4-ProTrack
-ClickFlash
-ClickFlash   // optional argument: 1 or 2 (Grid number)
-ClickFxVlj
-ClickFxVlj 1 // Toggle first FX-VLJ
-ClickLCTabMode
-ClickLCTabMode 1 // 1-Master, 2-Cue, 3-Zone, 4-ProTrack
-ClickLive
-ClickLive   // optional argument: 1 or 2 (Grid number)
-ClickLockSize
-ClickLockSize 1  //0,1,2 Off, On, toggle
-ClickRestart
-ClickRestart   // optional argument: 1 or 2 (Grid number)
-ClickScrollA
-ClickScrollA -5 // scroll speed, recommended -5..-1, or 1..5. Zero will stop.
-ClickScrollAniSpeed
-ClickScrollAniSpeed -5 // scroll speed, recommended -5..-1, or 1..5. Zero will stop.
-ClickScrollB
-ClickScrollB -5 // scroll speed, recommended -5..-1, or 1..5. Zero will stop.
-ClickScrollColor
-ClickScrollColor -5 // scroll speed, recommended -5..-1, or 1..5. Zero will stop.
-ClickScrollFade
-ClickScrollFade -5 // scroll speed, recommended -5..-1, or 1..5. Zero will stop.
-ClickScrollG
-ClickScrollG -5 // scroll speed, recommended -5..-1, or 1..5. Zero will stop.
-ClickScrollHue
-ClickScrollHue -5 // scroll speed, recommended -5..-1, or 1..5. Zero will stop.
-ClickScrollHueShift
-ClickScrollHueShift -5 // scroll speed, recommended -5..-1, or 1..5. Zero will stop.
-ClickScrollR
-ClickScrollR -5 // scroll speed, recommended -5..-1, or 1..5. Zero will stop.
-ClickScrollSaturation
-ClickScrollSaturation -5 // scroll speed, recommended -5..-1, or 1..5. Zero will stop.
-ClickScrollScanRate
-ClickScrollScanRate -5 // scroll speed, recommended -5..-1, or 1..5. Zero will stop.
-ClickScrollSize
-ClickScrollSize -5 // scroll speed, recommended -5..-1, or 1..5. Zero will stop.
-ClickScrollVPoints
-ClickScrollVPoints -5 // scroll speed, recommended -5..-1, or 1..5. Zero will stop.
-ClickScrollZoom
-ClickScrollZoom -5 // scroll speed, recommended -5..-1, or 1..5. Zero will stop.
-ClickSelect
-ClickSelect  // optional argument: 1 or 2 (Grid number)
-ClickSoloFlash
-ClickSoloFlash   // optional argument: 1 or 2 (Grid number)
-ClickTCTabMode
-ClickTCTabMode 1 // 1-Master, 2-Cue, 3-Zone, 4-ProTrack
-ClickToggle
-ClickToggle  // optional argument: 1 or 2 (Grid number)
-ClickTrack
-ClickTrack   // optional argument: 1 or 2 (Grid number)
-CloseUmax
-CloseUmax
-CodeColorMarker
-CodeColorMarker 0x00FF00 // green color marker
-CodeName
-CodeName "MyCode" // define name of
-CodeShortcut
-CodeShortcut "Ctrl+D"
-ColorBGR
-ColorBGR 0x0000FF // blue color
-ColorOn
-ColorOn 1// 1-enabled, 0-disabled
-ColorRGB
-ColorRGB 0x0000FF // red color,
-ColorSlider
-ColorSlider 0 // 0..255
-ColorSliderDelta
-ColorSliderDelta 0
-ControlCue
-ControlCue 1,1
-ControlFromFxTab
-ControlFromFxTab
-ControlFromLcTab
-ControlFromLcTab
-ControlFromTcTab
-ControlFromTcTab
-ControlFromUI
-ControlFromUI
-ControlMaster
-ControlMaster
-ControlProTrack
-ControlProTrack 1
-ControlProjector
-ControlProjector 1
-ControlSelCues
-ControlSelCues
-ControlSelProTracks
-ControlSelProTracks
-ControlSelZones
-ControlSelZones
-ControlZone
-ControlZone 1 // name as "Main Graphics", or zone number 1...N
-CueDown
-CueDown 1,1 // page 1..100, cue 1..100
-CueUp
-CueUp 1,1 // page 1..100, cue 1..100
-DecreaseTrigger
-DecreaseTrigger 0,100,"MyLabel" // Min Value, Max Value, Label name
-DefineDmxTrigger
-DefineDmxTrigger 1 // Channel
-DefineMidiTrigger
-DefineMidiTrigger 0xC0, 0x00 // MIDI Cmmand, MIDI Data 1, Trigger Name (optional), MIDI Dev index from 0 to 3 (optional), but default - any
-DefineTcTrigger
-DefineTCTrigger "TC Test"// hour, minute, second
-DefineTrigger
-DefineTrigger "2+2" // expression...
-DeletePropAni
-DeletePropAni // "variable", ["variable",..]
-DisableLaserOutput
-DisableLaserOutput
-DisplayPopup
-DisplayPopup "Hello world!"
-DisplayPopupOnTop
-DisplayPopupOnTop "Hello world!"
-DisplayPreview
-DisplayPreview "Hello world!", 0x0000ff
-DmxInMute
-DmxInMute 1, 255 // Channel index, 0 or 1; or ChannelIndex
-DmxOut
-DmxOut 1, 255 // set first DMX OUT channel to 255 (max value)
-DmxOutRange
-DmxOutRange 1, 255 // set first DMX OUT channel
-DropFX
-DropFX 1,1, 1000 // Layer, Index, duration ms
-Echo
-Echo 2  // 0-none, 1-ok/error, 2-echo of input plus ok/error
-EnableDmxIn
-EnableDmxIn Toggle  // ON, OFF, TOGGLE
-EnableFb3StyleDmxIn
-EnableFb3StyleDmxIn 1 // On(1), Off(0), Toggle(2)
-EnableLaserOutput
-EnableLaserOutput
-ExecCmd
-ExecCmd "Blackout"
-Exit
-Exit
-ExitBEYOND
-ExitBEYOND // Exit from BEYOND
-FX
-FX 0,0,0,0 // One or more layers. 0 stop. Effect 1..100
-FXAction
-FXAction 100,100,100,100 // One or more layers. Set effect action from 0% to 100%
-FXCellClick
-FXCellClick 1,1
-FXCellDown
-FXCellDown 1, 1 // Layer number: 1..4, Effect number
-FXClick
-FXClick 1,1
-FXScroll
-FXScroll 1
-FXScrollDelta
-FXScrollDelta 8
-FXTimeScaleAx
-FXTimeScaleAx 1,2,1 // Layer, Mask (1,2,3), multiplier
-FXTimeScaleAxReset
-FXTimeScaleAxReset 1,2 // Layer, Mask (1,2,3)
-FXTimeScaleDeltaAx
-FXTimeScaleDeltaAx 1,2,1 // Layer, Mask (1,2,3), increment value
-FXTimeSync
-FXTimeSync 1,1 // Layer, Source (1-Master, 2-Own time)
-FocusCell
-FocusCell 1,1 // Column (1..10), Row (1..6)
-FocusCellIndex
-FocusCellIndex 1 // cell index, 1..60
-FocusProTrack
-FocusProTrack 1 // Track index/name
-FocusProjector
-FocusProjector 1 // Projector index, 1..N.
-FocusZone
-FocusZone 1 // zone index, 1..N.
-GetFxControl
-GetFxControl
-GetLiveControl
-GetLiveControl
-GetPage
-GetPage
-GetTimeControl
-GetPage
-GoGridMode
-GoGridMode
-GoPlayListMode
-GoPlayListMode
-GoTimelineMode
-GoTimelineMode
-GoUniverseMode
-GoUniverseMode
-GroupCue
-GroupCue
-Hello
-hello // answer will be Hello!
-HoldClick
-HoldClick ON
-HtmlBody
-HtmlBody
-HtmlClearBody
-HtmlClearBody
-HtmlClearHead
-HtmlClearHead
-HtmlHead
-HtmlHead
-HtmlHide
-HtmlHide
-HtmlUpdate
-HtmlUpdate
-Hue
-Hue 0
-HueDelta
-HueDelta 0
-HueShift
-HueShift 0
-HueShiftDelta
-HueShiftDelta 0
-InRangeTrigger
-InRangeTrigger 0,100,"MyLabel" // Min Value, Max Value, Label name
-InRangeTriggerCmd
-InRangeTriggerCmd 0,100,"Blackout" // Min Value, Max Value, Command
-IncreaseTrigger
-IncreaseTrigger 0,100,"MyLabel" // Min Value, Max Value, Label name
-InvertPlayersTime
-InvertPlayersTime
-InvertProTrackTime
-InvertProTrackTime
-InvertRotationX
-InvertRotationX
-InvertRotationY
-InvertRotationY
-InvertRotationZ
-InvertRotationZ
-LessThanTrigger
-LessThanTrigger 0,"MyLabel" // Value, Label name
-LinePerCycle
-LinePerCycle 24
-LoadCue
-LoadCue "c:\MyAnimationFile.bani" // Enter correct file name!
-LoadCueFromBlob
-<internal commmand>
-LoadPlaylist
-LoadPlaylist "c:\MyPlaylist.BeyondSL"
-LoadWorkspace
-LoadWorkspace "c:\MyWorkspace.BeyondWorkspace" // Enter correct file name!
-LoadZoneFromBlob
-<internal commmand>
-MakeSecuredFile
-MakeSecuredFile "Input file name", "Output file name", ClientHardwareSerial
-ManualBeat
-ManualBeat
-MasterAudioVolume
-MasterAudioVolume 100 // in percents
-MasterAudioVolumeMute
-MasterAudioVolumeMute 1 // On(1), Off(0), Toggle(2)
-MasterClockShift
-MasterClockShift 0 // in seconds
-MasterCueLcSpeed
-MasterCueLcSpeed 100 // in percents
-MasterCueSpeed
-MasterCueSpeed 100 // in percents
-MasterEffectClockShift
-MasterEffectClockShift 0 // in seconds
-MasterEffectMetroShift
-MasterEffectMetroShift 0 // in beats
-MasterFXSpeed
-MasterFXSpeed 100 // in percents
-MasterLCSpeed
-MasterLCSpeed 100 // in percents
-MasterMetroShift
-MasterMetroShift 0 // in beats
-MasterPause
-MasterPause Toggle //ON, OFF, TOGGLE
-MasterPauseTime
-MasterPauseTime 1000 // time in milliseconds
-MasterShowBrightness
-MasterShowBrightness 100 // in percents
-MasterShowSpeed
-MasterShowSpeed 100 // in percents
-MasterSpeed
-MasterSpeed 1 // From zero to one
-MasterTransition
-MasterTransition ON
-MasterTransitionIndex
-MasterTransitionIndex 2
-MasterTransitionTime
-MasterTransitionTime 0.1
-MasterZoneFxSpeed
-MasterZoneFxSpeed 100 // in percents
-MeshCurve
-MeshCurve 1,2,3 // quad-spline between point 1,2 and 3
-MeshPoint
-MeshPoint -100,-100, 0, "LeftBottom"
-MeshPointChan
-MeshPointChan 1,0,0
-MeshPolygon
-MeshPolygon 1,2 // connect 1st and 2nd point
-MeshRect
-MeshRect 1,2,3,4
-MeshSpline
-MeshSpline 1,2,3,4 // cubic-spline based on 4 points. 1,4 bases, 2,3 "handles"
-MeshTriangle
-MeshTriangle 1,2,3
-MidiOut
-MidiOut 0x90, 0x40, 0x7F
-MidiOutLong
-MidiOutLong 0x90, 0x40, 0x7F
-MidiSysexAdd
-MidiSysexAdd  "F0477F"  // add data to Systex buffer, string must represent sequence of hex values. In addition, you may use integer parameters
-MidiSysexSend
-MidiSysexSend // send prepared sysex buffer
-MidiSysexStart
-MidiSysexStart  // clear Sysex buffer
-MoreThanTrigger
-MoreThanTrigger 0,"MyLabel" // Value, Label name
-MoveFocus
-MoveFocus -1,0 // number of cells to go horizontally and vertically
-MulFXMulAx
-MulFXMulAx 1, 3, 1 // Multiply multiplier... :-) Layer number: 1..4, Mask (1 is clock, 2 is beat, 3 is clock and beat), Value of multiplier
-MultiCue
-MultiCue
-MuteAllProTracks
-MuteAllProTracks
-MuteProTrack
-MuteProTrack 1 // index(es) or name(s)
-MuteSelected
-MuteSelected
-MuteSelectedZones
-MuteSelectedZones OFF // ON, OFF, TOGGLE
-MuteZone
-MuteZone 0 // index(es) or name(s)
-MuteZonesOfProjector
-MuteZonesOfProjector 1 // projector index, 1..N.
-OneCue
-OneCue // one cue per workspace
-OnePer
-OnePer // one cue per projectoin zone
-OscOut
-OscOut "/beam1/xy", -5, 100 // set beam 1 position to [-5,100]
-OscOutTTS
-OscOutTTS "","" // Address, Type Tag String, Arguments (optional)
-OutOfRangeTrigger
-OutOfRangeTrigger 0,100,"MyLabel" // Min Value, Max Value, Label name
-OutOfRangeTriggerCmd
-OutOfRangeTriggerCmd 0,100,"Blackout" // Min Value, Max Value, Command
-Password
-password "enter pasword here"
-PasteToCue
-PasteToCue
-PauseCue
-PauseCue 1,1, TOGGLE // page, cue, action (ON, OFF, TOGGLE)
-PlayListFirst
-PlayListFirst
-PlayListLast
-PlayListLast
-PlayListNext
-PlayListNext
-PlayListPlay
-PlayListPlay
-PlayListPrev
-PlayListPrev
-PlayListSetPos
-PlayListSetPos 1
-PlayListSetTime
-PlayListSetTime 0
-PlayListStop
-PlayListStop
-PlayTimeline
-PlayTimeline
-PlayersDisk
-PlayersDisk 1, 0.1
-PlayersDiskShift
-PlayersDiskShift 0.1
-PlayersResetJump
-PlayersResetJump
-PlayersSetJump
-PlayersSetJump
-PlayersSetLoop
-PlayersSetLoop
-Position
-Position 0,0,0 // X,Y,Z position.
-PositionDelta
-PositionDelta 0,0,0 // X,Y,Z
-PositionIndex
-PositionIndex 1,0 // one axiz only: 1 is X, 2 is Y, 3 is Z. Second paramater is Value, 0 center, 100 is max
-PositionX
-PositionX 0 //-100..100
-PositionY
-PositionY 0 //-100..100
-PositionZ
-PositionZ 0 //-100..100
-PreviewMaster
-PreviewMaster
-PreviewNxN
-PreviewNxN 1 // 1 - laser, 2 - 2x2, 3 - 3x3, 4 - 4x4
-ProTrackDisk
-ProTrackDisk 1, 0.1
-ProTrackDiskShift
-ProTrackDiskShift 0.1
-ProTrackResetJump
-ProTrackResetJump
-ProTrackSetJump
-ProTrackSetJump
-ProTrackSetLoop
-ProTrackSetLoop
-ProjectionZonesDialog
-ProjectionZonesDialog
-PulseEvent
-PulseEvent "MyEventName"
-QLog
-QLog "My message to QLog tab"
-RGBA
-RGBA 255,255,255,255 // R,G,B,Alpha. 0..255
-RGBADelta
-RGBADelta 0,0,0,0
-ReStartCell
-RestartCell // restart current cell
-ReStoreZoneSelection
-ReStoreZoneSelection
-RebootConnectedFB4
-RebootConnectedFB4 // If you need to use this command then please contact Pangolin (report@pangolin.com) and tell what is wrong with your FB4. Thanks.
-RefreshDmxIn
-RefreshDmxIn // activate update of DMX IN reactions, independently on data changed or no
-RegisterOscFeedback
-RegisterOscFeedback "/beyond/master/brightness", "master.brightness"
-ResetCuesFX
-ResetCuesFX
-ResetFxTiming
-ResetFxTiming
-ResetLCTab
-ResetLCTab
-ResetLiveControl
-ResetLiveControl
-ResetMasterFX
-ResetMasterFX
-ResetMidiFeedback
-ResetMidiFeedback
-ResetOscFeedback
-ResetOscFeedback
-ResetPosition
-ResetPosition
-ResetProTrackFX
-ResetProTrackFX
-ResetRotation
-ResetRotation
-ResetRotationX
-ResetRotationX
-ResetRotationY
-ResetRotationY
-ResetRotationZ
-ResetRotationZ
-ResetZonesFX
-ResetZonesFX
-Restart
-Restart
-RestartCue
-RestartCue 1,1 // page, cue
-RestorePlayer
-RestorePlayer
-ResyncByCueClick
-ResyncByCueClick On  // options: On, Off, Toggle
-RotoSpeed
-RotoSpeed 0,0,0  // rotation speed by X,Y,Z axis. degree.
-RotoSpeedDelta
-RotoSpeedDelta 0,0,0 // increment of rotation speed. X,Y,Z axis.
-RotoSpeedX
-RotoSpeedX 0 // rotation speed, degree
-RotoSpeedY
-RotoSpeedY 0 // rotation speed, degree
-RotoSpeedZ
-RotoSpeedZ 0 // rotation speed, degree
-RunApp
-RunApp "C:\Windows\Notepad.exe", "" // full exe file name, parameters
-Saturation
-Saturation 0
-SaturationDelta
-SaturationDelta 0
-ScanRate
-ScanRate 100
-ScanRateDelta
-ScanRateDelta 0
-SelectAllCat
-SelectAllCat
-SelectAndFocusZone
-SelectAndFocusZone 1 // zone index, 1..N.
-SelectCat
-SelectCat 1 // category index, 1..N.
-SelectCatName
-SelectCatName "Graphics" // define correct Category name.
-SelectCue
-SelectCue "Cue01" // Enter correct Cue name!
-SelectFixt
-SelectFixt 0 // index(es) or name(s)
-SelectGrid
-SelectGrid 1 // 1-main grid, 2-grid at bottom. 0-recently active
-SelectMidi
-SelectMidi 1 // select MIDI device pair, 1..4.
-SelectNextCat
-SelectNextCat
-SelectNextCatGrid1
-SelectNextCatGrid1
-SelectNextPage
-SelectNextPage
-SelectNextPageGrid1
-SelectNextPageGrid1
-SelectNextTab
-SelectNextTab
-SelectNextTabGrid1
-SelectNextTabGrid1
-SelectPage
-SelectPage 1 // tab index, 1..N.
-SelectPageName
-SelectPageName "Graphics" // define Page name!
-SelectPrevCat
-SelectPrevCat
-SelectPrevCatGrid1
-SelectPrevCatGrid1
-SelectPrevPage
-SelectPrevPage
-SelectPrevPageGrid1
-SelectPrevPageGrid1
-SelectPrevTab
-SelectPrevTab
-SelectPrevTabGrid1
-SelectPrevTabGrid1
-SelectProTrack
-SelectProTrack 1 // index(es) (1..N) or name(string). Can be used more than one argument
-SelectProjector
-SelectProjector 1 // index(es) (1..N) or name(string). Can be used more than one argument
-SelectTab
-SelectTab 1  // tab index, 1..N.
-SelectTabName
-SelectTabName "Graphics" // define Page name!
-SelectZone
-SelectZone 1 // zone index, 1..N.
-SelectZoneName
-SelectZoneName "Main Graphics" // enter Zone name
-SetActiveGrid
-SetActiveGrid 1 // or 2
-SetAttractionSlider
-SetAttractionSlider 10
-SetAudioGain
-SetAudioGain 10 // 1..15
-SetAudioInGain
-SetAudioInGain 10 // 1 is min, 15 is max, 10 default
-SetAudioInRelease
-SetAudioInRelease 75 // 1 is min, 99 is max (slowest) 75 is default
-SetAudioRelease
-SetAudioRelease 75 // 1..99
-SetBpm
-SetBpm 120
-SetBpmDelta
-SetBpmDelta 1
-SetButtonMSL
-SetButtonMSL 1
-SetChannelToChannelRatio
-SetChannelToChannelRatio 0 // 0..100
-SetCueCaptionColor
-SetCueCaptionColor 1,2, 0x0000FF  // page 1, cue 2, color (windows, 24bit color)
-SetDmxEditorChannel
-SetDmxEditorChannel 1, 128
-SetDmxToChannelRatio
-SetDmxToChannelRatio 0 // 0..100
-SetEffectChannelAction
-SetEffectChannelAction 0 //0..100
-SetFFTToChannelRatio
-SetFFTToChannelRatio 0 // 0..100
-SetFX
-SetFX 1, 1 // Layer number: 1..4, Effect index: 1..100
-SetFX1MSL
-SetFX1MSL 1
-SetFX2MSL
-SetFX2MSL 1
-SetFX3MSL
-SetFX3MSL 1
-SetFX4MSL
-SetFX4MSL 1
-SetFX5MSL
-SetFX5MSL 1
-SetFX6MSL
-SetFX6MSL 1
-SetFXAction
-SetFXAction 1, 100 // Layer number: 1..4, Action 0..100 percent
-SetFXAction1
-SetFXAction1 100 // Action 0..100 percent
-SetFXAction2
-SetFXAction2 100 // Action 0..100 percent
-SetFXAction3
-SetFXAction3 100 // Action 0..100 percent
-SetFXAction4
-SetFXAction4 100 // Action 0..100 percent
-SetFXAction5
-SetFXAction5 100 // Action 0..100 percent
-SetFXAction6
-SetFXAction6 100 // Action 0..100 percent
-SetFXAction7
-SetFXAction7 100 // Action 0..100 percent
-SetFXAction8
-SetFXAction8 100 // Action 0..100 percent
-SetFXMul
-SetFXMul 1, 1,1 // Layer number: 1..4, Multiplier 1 - default value for clock and metronome
-SetFXMulAx
-SetFXMulAx 1, 3, 1 // Layer number: 1..4, Mask (1 is clock, 2 is beat, 3 is clock and beat), Value of multiplier
-SetFXMute
-SetFXMute 1, 0 // Layer number: 1..4, 0-Off, 1-On, 2-Toggle
-SetFrictionSlider
-SetFrictionSlider 10
-SetGrid1MSL
-SetGrid1MSL 1
-SetGrid1Page
-SetGrid1Page 1
-SetGrid2MSL
-SetGrid2MSL 1
-SetGrid2Page
-SetGrid2Page 1
-SetGridSize
-SetGridSize 8,5
-SetGridView
-SetGridView
-SetLimiterBeam
-SetLimiterBeam 5
-SetLimiterDMX
-SetLimiterDMX 5
-SetLimiterFlash
-SetLimiterFlash 4
-SetLimiterHold
-SetLimiterHold 3
-SetLimiterPerGrid
-SetLimiterPerGrid 10
-SetLimiterPerZone
-SetLimiterPerZone 3
-SetLimiterProfile
-SetLimiterProfile 1
-SetLimiterShow
-SetLimiterShow 2
-SetLocation
-SetLocation 1, 0,0,0 // set one of 256 positions/locations (index 1..256, X,Y,Z as normalized values (0..1)
-SetMassSlider
-SetMassSlider 4
-SetMidiLayer
-SetMidiLayer 1 // 1..8.
-SetPage
-SetPage 1
-SetPhysicsCheckbox
-SetPhysicsCheckbox ON
-SetPlayListView
-SetPlayListView
-SetProTrackZones
-SetProTrackZones 1, 1 // Track index/name, Zone name(es)/index(es)
-SetSliderMSL
-SetSliderMSL 1
-SetTimelineView
-SetTimelineView
-SetTransitionIndex
-SetTransitionIndex 2
-SetTransitionTime
-SetTransitionTime 0.1
-SetUCenterPage
-SetUCenterPage 1 // set first page
-SetUEditPage
-SetUEditPage 1 // set first page
-SetUMaxPage
-SetUMaxPage 1 // set first page
-SetUPreviewPage
-SetUPreviewPage 1 // set first page
-SetURightPage
-SetURightPage 1 // set first page
-SetUToolPage
-SetUToolPage 1 // set first page
-SetUniverseView
-SetUniverseView
-SetVdjToChannelRatio
-SetVdjToChannelRatio 0 // 0..100
-SetWorkspacePageCount
-<internal commmand>
-SetZoneMeshPointPos
-SetZoneMeshPointPos 1, 1,1, 0,0 // Zone index, X node index, Y node index, X coordinate (-32K..32K), y coordinate
-SetZoneMuteMSL
-SetZoneMuteMSL 1
-SetZoneSelMSL
-SetZoneSelMSL 1
-ShiftFX
-ShiftFX 1, 1 // Layer 1..4, delta
-ShiftFocus
-ShiftFocus -5 // go back and forth on N cells
-ShowHint
-ShowHint "Hello!" // show hint window in center of main window
-ShowItNowSMS
-ShowIsNowSMS 1
-ShowMasterHelpFile
-ShowMasterHelpFile
-ShutDownWindows
-ShutDownWindows // require ShutDownWindows.exe application
-Size
-Size 100,100,100 // Size X,Y,Z axis
-SizeDelta
-SizeDelta 0,0,0 // shift Size value
-SizeIndex
-SizeDelta 0,0
-SizeX
-SizeX 100
-SizeY
-SizeY 100
-SizeZ
-SizeZ 100
-Sleep
-Sleep 1000
-SoloProTrack
-SoloProTrack 1 // index(es) or name(s)
-StartAudioRecord
-StartAudioRecord
-StartCell
-StartCell // start current cell
-StartCode
-StartCode "MyCode" // put YOUR name of code
-StartCue
-StartCue 1,1
-StartPrevious
-StartPrevious // "Back" button
-StartTalkClient
-StartUdpTalkClient
-StartTalkServer
-StartUdpTalkServer
-StopAllAsync
-StopAllAsync 0.5 // duration in seconds
-StopAllNow
-StopAllNow // no arguments
-StopAllSync
-StopAllSync  0.5 // duration in seconds
-StopAudioRecord
-StopAudioRecord
-StopCell
-StopCell // stop current cell
-StopCode
-StopCode "MyCode"  // put YOUR name of code
-StopCue
-StopCue 1,1
-StopCueNow
-StopCueNow 1, 1 // page 1..100, cue 1..100
-StopCueSync
-StopCueSync 1, 1, 0.5 // page 1..100, cue 1..60, time 0..
-StopCueType
-StopCueType 255 //Mask: 1-Image, 2-Timeline, 4-DMX, 8-Sequence, 16-Beams, 32-Capture
-StopFX
-StopFX // One or more layers. 0 stop. Effect 1..100
-StopFxCell
-StopFXCell // Layer index, optional Cell index (relative, take into account scrollbar)
-StopOnBlackout
-StopOnBlackout 1
-StopProTrack
-StopProTrack 1 // index(es) (1..N) or name(string). Can be used more than one argument
-StopProTrackFX
-StopProTrackFX 1, 1 // Track index/name and FX line index(es). Counting from 1. If no arguments at all - stop all FX on all tracks
-StopTalkClient
-StopUdpTalkClient
-StopTalkServer
-StopUdpTalkServer
-StopTimeline
-StopTimeline
-StoreZoneSelection
-StoreZoneSelection
-StrobeSpeed
-StrobeSpeed 0.2 // period, flicker per second
-StrobeSpeedDelta
-StrobeSpeedDelta 0.1 // period, flicker per second
-SynchronizePlayerToBeat
-SynchronizePlayerToBeat On  // options: On, Off, Toggle
-TapByCueClick
-TapByCueClick On  // options: On,Off, Toggle
-TimelineAddMarker
-TimelineAddMarker
-TimelineEnableTC
-TimelineEnableTC
-TimelineFirstTab
-TimelineFirstTab
-TimelineJumpDelta
-TimelineJumpDelta 1 // one second
-TimelineJumpToEnd
-TimelineJumpToEnd
-TimelineJumpToStart
-TimelineJumpToStart
-TimelineLastTab
-TimelineLastTab
-TimelineMarker
-TimelineMarker
-TimelineNextEditPoint
-TimelineNextEditPoint
-TimelineNextMarker
-TimelineNextMarker
-TimelineNextTab
-TimelineNextTab
-TimelinePlay
-TimelinePlay
-TimelinePlayFromMarker
-TimelinePlayFromMarker ""
-TimelinePrevEditPoint
-TimelinePrevEditPoint
-TimelinePrevMarker
-TimelinePrevMarker
-TimelinePrevTab
-TimelinePrevTab
-TimelineQuickSave
-TimelineQuickSave
-TimelineSetPos
-TimelineSetPos 10 // jump to second 10
-TimelineSetTabIndex
-TimelineSetTabIndex
-TimelineSetTabName
-TimelineSetTabName "MyShow"
-TimelineSetViewRange
-TimelineSetViewRange 1,5 // from s to 5 second
-TimelineShiftViewRange
-TimelineShiftViewRange 1 // one second shift
-TimelineShowItNow
-TimelineShowItNow 1 // set online mode for timeline editor
-TimelineStop
-TimelineStop
-TimerBeat
-TimerBeat
-ToggleCell
-Toggle // start/stop current cell
-ToggleCue
-ToggleCue 1,1
-ToggleFX
-ToggleFX 1 // Layer number: 1..4
-ToggleMuteProTrack
-ToggleMuteProTrack 1 // index(es) or name(s)
-ToggleMuteZone
-ToggleMuteZone 0 // index(es) or name(s)
-ToggleMuteZoneOfProjector
-ToggleMuteZoneOfProjector 1 // 1st projector
-TogglePrevious
-TogglePrevious // "SWAP" button
-ToggleSelectFixt
-ToggleSelectFixt
-ToggleSelectProTrack
-ToggleSelectProTrack 1 // index(es) (1..N) or name(s)
-ToggleSelectProjector
-ToggleSelectProjector 1 // index(es) (1..N) or name(s)
-ToggleSelectZone
-ToggleSelectZone 1 // zone index, 1..N.
-ToggleSoloProTrack
-ToggleSoloProTrack 1 // index(es) or name(s)
-ToggleUCenterPage
-ToggleUCenterPage 1  // Relative command. +1 means next page, -1 means previous
-ToggleUEditPage
-ToggleUEditPage 1 // Relative command. +1 means next page, -1 means previous
-ToggleUMaxPage
-ToggleUMaxPage 1  // Relative command. +1 means next page, -1 means previous
-ToggleUPreviewPage
-ToggleUPreviewPage 1  // Relative command. +1 means next page, -1 means previous
-ToggleURightPage
-ToggleURightPage 1  // Relative command. +1 means next page, -1 means previous
-ToggleUToolPage
-ToggleUToolPage 1  // Relative command. +1 means next page, -1 means previous
-Transition
-Transition Toggle  // ON, OFF, TOGGLE
-UnMuteZonesOfProjector
-UnMuteZonesOfProjector 1 // projector index, 1..N.
-UnSelectZone
-UnSelectZone 1 // zone index, 1..N.
-UnSelectZoneName
-UnSelectZoneName "Main Graphics" // enter Zone name
-UnSoloAllProTrack
-UnSoloAllProTrack
-UnSoloProTrack
-UnSoloProTrack 1 // index(es) or name(s)
-UnmuteAllProTracks
-UnmuteAllProTracks
-UnmuteAllZone
-UnmuteAllZone
-UnmuteProTrack
-UnmuteProTrack 1 // index(es) or name(s)
-UnmuteZone
-UnmuteZone 0 // index(es) or name(s)
-UnselectAllCue
-UnselectAllCue
-UnselectAllFixt
-UnselectAllFixt
-UnselectAllProTracks
-UnselectAllProTracks
-UnselectAllProjectors
-UnselectAllProjectors
-UnselectAllZones
-UnselectAllZones
-UnselectFixt
-UnselectFixt 0 // index(es) or name(s)
-UnselectProTrack
-UnselectProTrack 1 // index(es) (1..N) or name(s)
-UnselectProjector
-UnselectProjector 1 // index(es) (1..N) or name(s)
-VLJFX
-VljFX 1, Toggle // index of FX-VLJ 1..4, and action: ON, OFF, TOGGLE
-Version
-version // remote server will get exe file version
-VirtualLJ
-VirtualLJ Toggle // ON, OFF, TOGGLE
-VisiblePoints
-VisiblePoints 100 // 0..100 (percents)
-VisiblePointsDelta
-VisiblePointsDelta 0
-WaitForAudioBeat
-WaitForAudioBeat 1
-WaitForBeat
-WaitForBeat 7, 1
-WaitForCellDown
-WaitForCellDown 1
-WaitForCellUp
-WaitForCellUp 1
-WaitForChannel
-WaitForChannel 1
-WaitForCueStart
-WaitForCueStart 1 1
-WaitForCueStop
-WaitForCueStop 1 1
-WaitForDmx
-WaitForDmx 1
-WaitForEvent
-WaitForEvent "MyEventName"
-WaitForHotKey
-WaitForHotKey // waiting for hotkey assigned to this script in Code-tab
-WaitForManualBeat
-WaitForManualBeat 1
-WaitForMidi
-WaitForMidi 0x90, -1, -1
-WaitForPageChange
-WaitForPageChange
-WaitForTC
-WaitForTC 15,30,0,0 // hours, minutes, seconds, ms
-WaitForTime
-WaitForTime 15,30,0,0 // hours, minutes, seconds, ms
-WaitForTimePos
-WaitForTimePos 21,00,00,00 // hours, minutes, seconds, ms
-WaitForTimerBeat
-WaitForTimerBeat 1
-Write
-write
-WriteLn
-writeln "Hello world!"
-ZoneFXTimeScale
-ZoneFXTimeScale 1,2,1 // Layer, Clock multipler, Metronome multiplier
-ZoneFXTimeScaleDelta
-ZoneFXTimeScaleDelta 0,0,0,0
-ZoneFXTimeShift
-ZoneFXTimeShift 1,2,1 // Layer, Clock multipler, Metronome multiplier
-ZoneFXTimeShiftDelta
-ZoneFXTimeShiftDelta 0,0,0,0
-Zoom
-Zoom 100 // value -100..100
-ZoomDelta
-ZoomDelta 0 // shift zoom value
+^ Function ^ Code ^ Comments ^
+|AddSms|AddSMS "This is my demo message"|
+|Angle|Angle 0,0,0|X,Y,Z angles in degrees|
+|AngleDelta|AngleDelta 0,0,0|increment X,Y,Z angles in degrees|
+|AngleX|AngleX 0|degree|
+|AngleY|AngleY 0|degree|
+|AngleZ|AngleZ 0|degree|
+|AnimateProp|AnimateProp "", 0,1,1000|"variable", From, To, Duration MS|
+|AnimatePropDelta|AnimatePropDelta "", 10,1000|"variable", Delta, Duration MS|
+|AnimationSpeed|AnimationSpeed 100|speed in %. Zero full stop.|
+|AnimationSpeedDelta|AnimationSpeedDelta 0|
+|AudioBeat|AudioBeat|
+|Autostart|AutoStart|
+|BeatResync|BeatResync|
+|BeatTap|BeatTap|
+|BlackOut|BlackOut|
+|Brightness|Brightness 100|0..100 (percents)|
+|BrightnessDelta|BrightnessDelta 0|
+|CaptureToClipboard|CaptureToClipboard |
+|ChannelOut|ChannelOut 1, 1000|set first channel to 1000 (max value) |
+|ClickFXStopAll|
+|ClickFXTabMode|ClickFXTabMode 1|1-Master, 2-Cue, 3-Zone, 4-ProTrack|
+|ClickFlash|ClickFlash  |optional argument: 1 or 2 (Grid number)|
+|ClickFxVlj|ClickFxVlj 1|Toggle first FX-VLJ |
+|ClickLCTabMode|ClickLCTabMode 1|1-Master, 2-Cue, 3-Zone, 4-ProTrack|
+|ClickLive|ClickLive  |optional argument: 1 or 2 (Grid number)|
+|ClickLockSize|ClickLockSize 1  |0,1,2 Off, On, toggle|
+|ClickRestart|ClickRestart  |optional argument: 1 or 2 (Grid number)|
+|ClickScrollA|ClickScrollA -5|scroll speed, recommended -5..-1, or 1..5. Zero will stop.|
+|ClickScrollAniSpeed|ClickScrollAniSpeed -5|scroll speed, recommended -5..-1, or 1..5. Zero will stop.|
+|ClickScrollB|ClickScrollB -5|scroll speed, recommended -5..-1, or 1..5. Zero will stop.|
+|ClickScrollColor|ClickScrollColor -5|scroll speed, recommended -5..-1, or 1..5. Zero will stop.|
+|ClickScrollFade|ClickScrollFade -5|scroll speed, recommended -5..-1, or 1..5. Zero will stop.|
+|ClickScrollG|ClickScrollG -5|scroll speed, recommended -5..-1, or 1..5. Zero will stop.|
+|ClickScrollHue|ClickScrollHue -5|scroll speed, recommended -5..-1, or 1..5. Zero will stop.|
+|ClickScrollHueShift|ClickScrollHueShift -5|scroll speed, recommended -5..-1, or 1..5. Zero will stop.|
+|ClickScrollR|ClickScrollR -5|scroll speed, recommended -5..-1, or 1..5. Zero will stop.|
+|ClickScrollSaturation|ClickScrollSaturation -5|scroll speed, recommended -5..-1, or 1..5. Zero will stop.|
+|ClickScrollScanRate|ClickScrollScanRate -5|scroll speed, recommended -5..-1, or 1..5. Zero will stop.|
+|ClickScrollSize|ClickScrollSize -5|scroll speed, recommended -5..-1, or 1..5. Zero will stop.|
+|ClickScrollVPoints|ClickScrollVPoints -5|scroll speed, recommended -5..-1, or 1..5. Zero will stop.|
+|ClickScrollZoom|ClickScrollZoom -5|scroll speed, recommended -5..-1, or 1..5. Zero will stop.|
+|ClickSelect|ClickSelect |optional argument: 1 or 2 (Grid number)|
+|ClickSoloFlash|ClickSoloFlash  |optional argument: 1 or 2 (Grid number)|
+|ClickTCTabMode|ClickTCTabMode 1|1-Master, 2-Cue, 3-Zone, 4-ProTrack|
+|ClickToggle|ClickToggle |optional argument: 1 or 2 (Grid number)|
+|ClickTrack|ClickTrack  |optional argument: 1 or 2 (Grid number)|
+|CloseUmax|CloseUmax|
+|CodeColorMarker|CodeColorMarker 0x00FF00|green color marker |
+|CodeName|CodeName "MyCode"|define name of |
+|CodeShortcut|CodeShortcut "Ctrl+D"|
+|ColorBGR|ColorBGR 0x0000FF|blue color|
+|ColorOn|ColorOn 1|1-enabled, 0-disabled|
+|ColorRGB|ColorRGB 0x0000FF|red color, |
+|ColorSlider|ColorSlider 0|0..255|
+|ColorSliderDelta|ColorSliderDelta 0|
+|ControlCue|ControlCue 1,1|
+|ControlFromFxTab|ControlFromFxTab|
+|ControlFromLcTab|ControlFromLcTab|
+|ControlFromTcTab|ControlFromTcTab|
+|ControlFromUI|ControlFromUI|
+|ControlMaster|ControlMaster|
+|ControlProTrack|ControlProTrack 1|
+|ControlProjector|ControlProjector 1|
+|ControlSelCues|ControlSelCues|
+|ControlSelProTracks|ControlSelProTracks|
+|ControlSelZones|ControlSelZones|
+|ControlZone|ControlZone 1|name as "Main Graphics", or zone number 1...N|
+|CueDown|Cuedown 1,1|page 1..100, cue 1..100|
+|CueUp|CueUp 1,1|page 1..100, cue 1..100|
+|DecreaseTrigger|DecreaseTrigger 0,100,"MyLabel"|Min Value, Max Value, Label name|
+|DefineDmxTrigger|DefineDmxTrigger 1|Channel|
+|DefineMidiTrigger|DefineMidiTrigger 0xC0, 0x00|MIDI Cmmand, MIDI Data 1, Trigger Name (optional), MIDI Dev index from 0 to 3 (optional), but default - any|
+|DefineTcTrigger|DefineTCTrigger "TC Test"|hour, minute, second|
+|DefineTrigger|DefineTrigger "2+2"|expression...|
+|DeletePropAni|DeletePropAni|"variable", ["variable",..]|
+|DisableLaserOutput|DisableLaserOutput|
+|DisplayPopup|DisplayPopup "Hello world!"|
+|DisplayPopupOnTop|DisplayPopupOnTop "Hello world!"|
+|DisplayPreview|DisplayPreview "Hello world!", 0x0000ff|
+|DmxInMute|DmxInMute 1, 255|Channel index, 0 or 1; or ChannelIndex|
+|DmxOut|DmxOut 1, 255|set first DMX OUT channel to 255 (max value)|
+|DmxOutRange|DmxOutRange 1, 255|set first DMX OUT channel |
+|DropFX|DropFX 1,1, 1000|Layer, Index, duration ms|
+|Echo|Echo 2 |0-none, 1-ok/error, 2-echo of input plus ok/error|
+|EnableDmxIn|EnableDmxIn Toggle |ON, OFF, TOGGLE|
+|EnableFb3StyleDmxIn|EnableFb3StyleDmxIn 1|On(1), Off(0), Toggle(2)|
+|EnableLaserOutput|EnableLaserOutput|
+|ExecCmd|ExecCmd "Blackout"|
+|Exit|Exit|
+|ExitBEYOND|ExitBEYOND|Exit from BEYOND|
+|FX|FX 0,0,0,0|One or more layers. 0 stop. Effect 1..100|
+|FXAction|FXAction 100,100,100,100|One or more layers. Set effect action from 0% to 100%|
+|FXCellClick|FXCellClick 1,1|
+|FXCellDown|FXCellDown 1, 1|Layer number: 1..4, Effect number|
+|FXClick|FXClick 1,1|
+|FXScroll|FXScroll 1|
+|FXScrollDelta|FXScrollDelta 8|
+|FXTimeScaleAx|FXTimeScaleAx 1,2,1|Layer, Mask (1,2,3), multiplier|
+|FXTimeScaleAxReset|FXTimeScaleAxReset 1,2|Layer, Mask (1,2,3)|
+|FXTimeScaleDeltaAx|FXTimeScaleDeltaAx 1,2,1|Layer, Mask (1,2,3), increment value|
+|FXTimeSync|FXTimeSync 1,1|Layer, Source (1-Master, 2-Own time)|
+|FocusCell|FocusCell 1,1|Column (1..10), Row (1..6)|
+|FocusCellIndex|FocusCellIndex 1|cell index, 1..60|
+|FocusProTrack|FocusProTrack 1|Track index/name|
+|FocusProjector|FocusProjector 1|Projector index, 1..N.|
+|FocusZone|FocusZone 1|zone index, 1..N.|
+|GetFxControl|GetFxControl||
+|GetLiveControl|GetLiveControl|
+|GetPage|GetPage|
+|GetTimeControl|GetPage|
+|GoGridMode|GoGridMode|
+|GoPlayListMode|GoPlayListMode|
+|GoTimelineMode|GoTimelineMode|
+|GoUniverseMode|GoUniverseMode|
+|GroupCue|GroupCue|
+|Hello|hello|answer will be Hello!|
+|HoldClick|HoldClick ON|
+|HtmlBody|HtmlBody|
+|HtmlClearBody|HtmlClearBody|
+|HtmlClearHead|HtmlClearHead|
+|HtmlHead|HtmlHead|
+|HtmlHide|HtmlHide|
+|HtmlUpdate|HtmlUpdate|
+|Hue|Hue 0|
+|HueDelta|HueDelta 0|
+|HueShift|HueShift 0|
+|HueShiftDelta|HueShiftDelta 0|
+|InRangeTrigger|InRangeTrigger 0,100,"MyLabel"|Min Value, Max Value, Label name|
+|InRangeTriggerCmd|InRangeTriggerCmd 0,100,"Blackout"|Min Value, Max Value, Command|
+|IncreaseTrigger|IncreaseTrigger 0,100,"MyLabel"|Min Value, Max Value, Label name|
+|InvertPlayersTime|InvertPlayersTime|
+|InvertProTrackTime|InvertProTrackTime|
+|InvertRotationX|InvertRotationX|
+|InvertRotationY|InvertRotationY|
+|InvertRotationZ|InvertRotationZ|
+|LessThanTrigger|LessThanTrigger 0,"MyLabel"|Value, Label name|
+|LinePerCycle|LinePerCycle 24|
+|LoadCue|LoadCue "c:\MyAnimationFile.bani"|Enter correct file name!|
+|LoadCueFromBlob|<internal commmand>|
+|LoadPlaylist|LoadPlaylist "c:\MyPlaylist.BeyondSL"|
+|LoadWorkspace|LoadWorkspace "c:\MyWorkspace.BeyondWorkspace"|Enter correct file name!|
+|LoadZoneFromBlob|<internal commmand>|
+|MakeSecuredFile|MakeSecuredFile "Input file name", "Output file name", ClientHardwareSerial|
+|ManualBeat|ManualBeat|
+|MasterAudioVolume|MasterAudioVolume 100|in percents|
+|MasterAudioVolumeMute|MasterAudioVolumeMute 1|On(1), Off(0), Toggle(2)|
+|MasterClockShift|MasterClockShift 0|in seconds|
+|MasterCueLcSpeed|MasterCueLcSpeed 100|in percents|
+|MasterCueSpeed|MasterCueSpeed 100|in percents|
+|MasterEffectClockShift|MasterEffectClockShift 0|in seconds|
+|MasterEffectMetroShift|MasterEffectMetroShift 0|in beats|
+|MasterFXSpeed|MasterFXSpeed 100|in percents|
+|MasterLCSpeed|MasterLCSpeed 100|in percents|
+|MasterMetroShift|MasterMetroShift 0|in beats|
+|MasterPause|MasterPause Toggle |ON, OFF, TOGGLE|
+|MasterPauseTime|MasterPauseTime 1000|time in milliseconds|
+|MasterShowBrightness|MasterShowBrightness 100|in percents|
+|MasterShowSpeed|MasterShowSpeed 100|in percents|
+|MasterSpeed|MasterSpeed 1|From zero to one|
+|MasterTransition|MasterTransition ON|
+|MasterTransitionIndex|MasterTransitionIndex 2|
+|MasterTransitionTime|MasterTransitionTime 0.1|
+|MasterZoneFxSpeed|MasterZoneFxSpeed 100|in percents|
+|MeshCurve|MeshCurve 1,2,3|quad-spline between point 1,2 and 3|
+|MeshPoint|MeshPoint -100,-100, 0, "LeftBottom"|
+|MeshPointChan|MeshPointChan 1,0,0|
+|MeshPolygon|MeshPolygon 1,2|connect 1st and 2nd point|
+|MeshRect|MeshRect 1,2,3,4 |
+|MeshSpline|MeshSpline 1,2,3,4|cubic-spline based on 4 points. 1,4 bases, 2,3 "handles"|
+|MeshTriangle|MeshTriangle 1,2,3|
+|MidiOut|MidiOut 0x90, 0x40, 0x7F|
+|MidiOutLong|MidiOutLong 0x90, 0x40, 0x7F|
+|MidiSysexAdd|MidiSysexAdd  "F0477F" |add data to Systex buffer, string must represent sequence of hex values. In addition, you may use integer parameters|
+|MidiSysexSend|MidiSysexSend|send prepared sysex buffer|
+|MidiSysexStart|MidiSysexStart |clear Sysex buffer|
+|MoreThanTrigger|MoreThanTrigger 0,"MyLabel"|Value, Label name|
+|MoveFocus|MoveFocus -1,0|number of cells to go horizontally and vertically|
+|MulFXMulAx|MulFXMulAx 1, 3, 1|Multiply multiplier... :-) Layer number: 1..4, Mask (1 is clock, 2 is beat, 3 is clock and beat), Value of multiplier|
+|MultiCue|MultiCue|
+|MuteAllProTracks|MuteAllProTracks|
+|MuteProTrack|MuteProTrack 1|index(es) or name(s)|
+|MuteSelected|MuteSelected|
+|MuteSelectedZones|MuteSelectedZones OFF|ON, OFF, TOGGLE|
+|MuteZone|MuteZone 0|index(es) or name(s)|
+|MuteZonesOfProjector|MuteZonesOfProjector 1|projector index, 1..N.|
+|OneCue|OneCue|one cue per workspace|
+|OnePer|OnePer|one cue per projectoin zone |
+|OscOut|OscOut "/beam1/xy", -5, 100|set beam 1 position to [-5,100]|
+|OscOutTTS|OscOutTTS "",""|Address, Type Tag String, Arguments (optional)|
+|OutOfRangeTrigger|OutOfRangeTrigger 0,100,"MyLabel"|Min Value, Max Value, Label name|
+|OutOfRangeTriggerCmd|OutOfRangeTriggerCmd 0,100,"Blackout"|Min Value, Max Value, Command|
+|Password|password "enter pasword here"|
+|PasteToCue|PasteToCue|
+|PauseCue|PauseCue 1,1, TOGGLE|page, cue, action (ON, OFF, TOGGLE)|
+|PlayListFirst|PlayListFirst|
+|PlayListLast|PlayListLast|
+|PlayListNext|PlayListNext|
+|PlayListPlay|PlayListPlay|
+|PlayListPrev|PlayListPrev|
+|PlayListSetPos|PlayListSetPos 1|
+|PlayListSetTime|PlayListSetTime 0|
+|PlayListStop|PlayListStop|
+|PlayTimeline|PlayTimeline|
+|PlayersDisk|PlayersDisk 1, 0.1|
+|PlayersDiskShift|PlayersDiskShift 0.1|
+|PlayersResetJump|PlayersResetJump|
+|PlayersSetJump|PlayersSetJump|
+|PlayersSetLoop|PlayersSetLoop|
+|Position|Position 0,0,0|X,Y,Z position. |
+|PositionDelta|PositionDelta 0,0,0|X,Y,Z |
+|PositionIndex|PositionIndex 1,0|one axiz only: 1 is X, 2 is Y, 3 is Z. Second paramater is Value, 0 center, 100 is max|
+|PositionX|PositionX 0 |-100..100|
+|PositionY|PositionY 0 |-100..100|
+|PositionZ|PositionZ 0 |-100..100|
+|PreviewMaster|PreviewMaster|
+|PreviewNxN|PreviewNxN 1|1 - laser, 2 - 2x2, 3 - 3x3, 4 - 4x4|
+|ProTrackDisk|ProTrackDisk 1, 0.1|
+|ProTrackDiskShift|ProTrackDiskShift 0.1|
+|ProTrackResetJump|ProTrackResetJump|
+|ProTrackSetJump|ProTrackSetJump|
+|ProTrackSetLoop|ProTrackSetLoop|
+|ProjectionZonesDialog|ProjectionZonesDialog|
+|PulseEvent|PulseEvent "MyEventName"|
+|QLog|QLog "My message to QLog tab"|
+|RGBA|RGBA 255,255,255,255|R,G,B,Alpha. 0..255|
+|RGBADelta|RGBADelta 0,0,0,0|
+|ReStartCell|RestartCell|restart current cell|
+|ReStoreZoneSelection|ReStoreZoneSelection|
+|RebootConnectedFB4|RebootConnectedFB4|If you need to use this command then please contact Pangolin (report@pangolin.com) and tell what is wrong with your FB4. Thanks.|
+|RefreshDmxIn|RefreshDmxIn|activate update of DMX IN reactions, independently on data changed or no|
+|RegisterOscFeedback|RegisterOscFeedback "/beyond/master/brightness", "master.brightness"|
+|ResetCuesFX|ResetCuesFX|
+|ResetFxTiming|ResetFxTiming|
+|ResetLCTab|ResetLCTab|
+|ResetLiveControl|ResetLiveControl|
+|ResetMasterFX|ResetMasterFX|
+|ResetMidiFeedback|ResetMidiFeedback|
+|ResetOscFeedback|ResetOscFeedback|
+|ResetPosition|ResetPosition|
+|ResetProTrackFX|ResetProTrackFX|
+|ResetRotation|ResetRotation|
+|ResetRotationX|ResetRotationX|
+|ResetRotationY|ResetRotationY|
+|ResetRotationZ|ResetRotationZ|
+|ResetZonesFX|ResetZonesFX|
+|Restart|Restart|
+|RestartCue|RestartCue 1,1|page, cue|
+|RestorePlayer|RestorePlayer|
+|ResyncByCueClick|ResyncByCueClick On |options: On, Off, Toggle|
+|RotoSpeed|RotoSpeed 0,0,0 |rotation speed by X,Y,Z axis. degree.|
+|RotoSpeedDelta|RotoSpeedDelta 0,0,0|increment of rotation speed. X,Y,Z axis.|
+|RotoSpeedX|RotoSpeedX 0|rotation speed, degree|
+|RotoSpeedY|RotoSpeedY 0|rotation speed, degree|
+|RotoSpeedZ|RotoSpeedZ 0|rotation speed, degree|
+|RunApp|RunApp "C:\Windows\Notepad.exe", ""|full exe file name, parameters|
+|Saturation|Saturation 0|
+|SaturationDelta|SaturationDelta 0|
+|ScanRate|ScanRate 100|
+|ScanRateDelta|ScanRateDelta 0|
+|SelectAllCat|SelectAllCat|
+|SelectAndFocusZone|SelectAndFocusZone 1|zone index, 1..N.|
+|SelectCat|SelectCat 1|category index, 1..N.|
+|SelectCatName|SelectCatName "Graphics"|define correct Category name.|
+|SelectCue|SelectCue "Cue01"|Enter correct Cue name!|
+|SelectFixt|SelectFixt 0|index(es) or name(s)|
+|SelectGrid|SelectGrid 1|1-main grid, 2-grid at bottom. 0-recently active|
+|SelectMidi|SelectMidi 1|select MIDI device pair, 1..4.|
+|SelectNextCat|SelectNextCat|
+|SelectNextCatGrid1|SelectNextCatGrid1|
+|SelectNextPage|SelectNextPage|
+|SelectNextPageGrid1|SelectNextPageGrid1|
+|SelectNextTab|SelectNextTab|
+|SelectNextTabGrid1|SelectNextTabGrid1|
+|SelectPage|SelectPage 1|tab index, 1..N.|
+|SelectPageName|SelectPageName "Graphics"|define Page name!|
+|SelectPrevCat|SelectPrevCat|
+|SelectPrevCatGrid1|SelectPrevCatGrid1|
+|SelectPrevPage|SelectPrevPage|
+|SelectPrevPageGrid1|SelectPrevPageGrid1|
+|SelectPrevTab|SelectPrevTab|
+|SelectPrevTabGrid1|SelectPrevTabGrid1|
+|SelectProTrack|SelectProTrack 1|index(es) (1..N) or name(string). Can be used more than one argument|
+|SelectProjector|SelectProjector 1|index(es) (1..N) or name(string). Can be used more than one argument|
+|SelectTab|SelectTab 1 |tab index, 1..N.|
+|SelectTabName|SelectTabName "Graphics"|define Page name!|
+|SelectZone|SelectZone 1|zone index, 1..N.|
+|SelectZoneName|SelectZoneName "Main Graphics"|enter Zone name|
+|SetActiveGrid|SetActiveGrid 1|or 2 |
+|SetAttractionSlider|SetAttractionSlider 10|
+|SetAudioGain|SetAudioGain 10|1..15|
+|SetAudioInGain|SetAudioInGain 10|1 is min, 15 is max, 10 default|
+|SetAudioInRelease|SetAudioInRelease 75|1 is min, 99 is max (slowest) 75 is default|
+|SetAudioRelease|SetAudioRelease 75|1..99|
+|SetBpm|SetBpm 120|
+|SetBpmDelta|SetBpmDelta 1|
+|SetButtonMSL|SetButtonMSL 1|
+|SetChannelToChannelRatio|SetChannelToChannelRatio 0|0..100|
+|SetCueCaptionColor|SetCueCaptionColor 1,2, 0x0000FF |page 1, cue 2, color (windows, 24bit color)|
+|SetDmxEditorChannel|SetDmxEditorChannel 1, 128|
+|SetDmxToChannelRatio|SetDmxToChannelRatio 0|0..100|
+|SetEffectChannelAction|SetEffectChannelAction 0 |0..100|
+|SetFFTToChannelRatio|SetFFTToChannelRatio 0|0..100|
+|SetFX|SetFX 1, 1|Layer number: 1..4, Effect index: 1..100|
+|SetFX1MSL|SetFX1MSL 1|
+|SetFX2MSL|SetFX2MSL 1|
+|SetFX3MSL|SetFX3MSL 1|
+|SetFX4MSL|SetFX4MSL 1|
+|SetFX5MSL|SetFX5MSL 1|
+|SetFX6MSL|SetFX6MSL 1|
+|SetFXAction|SetFXAction 1, 100|Layer number: 1..4, Action 0..100 percent|
+|SetFXAction1|SetFXAction1 100|Action 0..100 percent|
+|SetFXAction2|SetFXAction2 100|Action 0..100 percent|
+|SetFXAction3|SetFXAction3 100|Action 0..100 percent|
+|SetFXAction4|SetFXAction4 100|Action 0..100 percent|
+|SetFXAction5|SetFXAction5 100|Action 0..100 percent|
+|SetFXAction6|SetFXAction6 100|Action 0..100 percent|
+|SetFXAction7|SetFXAction7 100|Action 0..100 percent|
+|SetFXAction8|SetFXAction8 100|Action 0..100 percent|
+|SetFXMul|SetFXMul 1, 1,1|Layer number: 1..4, Multiplier 1 - default value for clock and metronome|
+|SetFXMulAx|SetFXMulAx 1, 3, 1|Layer number: 1..4, Mask (1 is clock, 2 is beat, 3 is clock and beat), Value of multiplier|
+|SetFXMute|SetFXMute 1, 0|Layer number: 1..4, 0-Off, 1-On, 2-Toggle|
+|SetFrictionSlider|SetFrictionSlider 10|
+|SetGrid1MSL|SetGrid1MSL 1|
+|SetGrid1Page|SetGrid1Page 1|
+|SetGrid2MSL|SetGrid2MSL 1|
+|SetGrid2Page|SetGrid2Page 1|
+|SetGridSize|SetGridSize 8,5|
+|SetGridView|SetGridView|
+|SetLimiterBeam|SetLimiterBeam 5|
+|SetLimiterDMX|SetLimiterDMX 5|
+|SetLimiterFlash|SetLimiterFlash 4|
+|SetLimiterHold|SetLimiterHold 3|
+|SetLimiterPerGrid|SetLimiterPerGrid 10|
+|SetLimiterPerZone|SetLimiterPerZone 3|
+|SetLimiterProfile|SetLimiterProfile 1|
+|SetLimiterShow|SetLimiterShow 2|
+|SetLocation|SetLocation 1, 0,0,0|set one of 256 positions/locations (index 1..256, X,Y,Z as normalized values (0..1)|
+|SetMassSlider|SetMassSlider 4|
+|SetMidiLayer|SetMidiLayer 1|1..8.|
+|SetPage|SetPage 1|
+|SetPhysicsCheckbox|SetPhysicsCheckbox ON|
+|SetPlayListView|SetPlayListView|
+|SetProTrackZones|SetProTrackZones 1, 1|Track index/name, Zone name(es)/index(es)|
+|SetSliderMSL|SetSliderMSL 1|
+|SetTimelineView|SetTimelineView|
+|SetTransitionIndex|SetTransitionIndex 2|
+|SetTransitionTime|SetTransitionTime 0.1|
+|SetUCenterPage|SetUCenterPage 1|set first page|
+|SetUEditPage|SetUEditPage 1|set first page|
+|SetUMaxPage|SetUMaxPage 1|set first page|
+|SetUPreviewPage|SetUPreviewPage 1|set first page|
+|SetURightPage|SetURightPage 1|set first page|
+|SetUToolPage|SetUToolPage 1|set first page|
+|SetUniverseView|SetUniverseView|
+|SetVdjToChannelRatio|SetVdjToChannelRatio 0|0..100|
+|SetWorkspacePageCount|<internal commmand>|
+|SetZoneMeshPointPos|SetZoneMeshPointPos 1, 1,1, 0,0|Zone index, X node index, Y node index, X coordinate (-32K..32K), y coordinate|
+|SetZoneMuteMSL|SetZoneMuteMSL 1|
+|SetZoneSelMSL|SetZoneSelMSL 1|
+|ShiftFX|ShiftFX 1, 1|Layer 1..4, delta|
+|ShiftFocus|ShiftFocus -5|go back and forth on N cells|
+|ShowHint|ShowHint "Hello!"|show hint window in center of main window|
+|ShowItNowSMS|ShowIsNowSMS 1|
+|ShowMasterHelpFile|ShowMasterHelpFile|
+|ShutDownWindows|ShutDownWindows|require ShutDownWindows.exe application|
+|Size|Size 100,100,100|Size X,Y,Z axis|
+|SizeDelta|SizeDelta 0,0,0|shift Size value|
+|SizeIndex|SizeDelta 0,0|
+|SizeX|SizeX 100|
+|SizeY|SizeY 100|
+|SizeZ|SizeZ 100|
+|Sleep|Sleep 1000|
+|SoloProTrack|SoloProTrack 1|index(es) or name(s)|
+|StartAudioRecord|StartAudioRecord|
+|StartCell|StartCell|start current cell|
+|StartCode|StartCode "MyCode"|put YOUR name of code|
+|StartCue|StartCue 1,1|
+|StartPrevious|StartPrevious|"Back" button|
+|StartTalkClient|StartUdpTalkClient|
+|StartTalkServer|StartUdpTalkServer|
+|StopAllAsync|StopAllAsync 0.5|duration in seconds|
+|StopAllNow|StopAllNow|no arguments|
+|StopAllSync|StopAllSync  0.5|duration in seconds|
+|StopAudioRecord|StopAudioRecord|
+|StopCell|StopCell|stop current cell|
+|StopCode|StopCode "MyCode" |put YOUR name of code|
+|StopCue|StopCue 1,1|
+|StopCueNow|StopCueNow 1, 1|page 1..100, cue 1..100|
+|StopCueSync|StopCueSync 1, 1, 0.5|page 1..100, cue 1..60, time 0..|
+|StopCueType|StopCueType 255 |Mask: 1-Image, 2-Timeline, 4-DMX, 8-Sequence, 16-Beams, 32-Capture|
+|StopFX|StopFX|One or more layers. 0 stop. Effect 1..100|
+|StopFxCell|StopFXCell|Layer index, optional Cell index (relative, take into account scrollbar)|
+|StopOnBlackout|StopOnBlackout 1|
+|StopProTrack|StopProTrack 1|index(es) (1..N) or name(string). Can be used more than one argument|
+|StopProTrackFX|StopProTrackFX 1, 1|Track index/name and FX line index(es). Counting from 1. If no arguments at all - stop all FX on all tracks|
+|StopTalkClien
+|StopTalkServer|StopUdpTalkServer|
+|StopTimeline|StopTimeline|
+|StoreZoneSelection|StoreZoneSelection|
+|StrobeSpeed|StrobeSpeed 0.2|period, flicker per second|
+|StrobeSpeedDelta|StrobeSpeedDelta 0.1|period, flicker per second|
+|SynchronizePlayerToBeat|SynchronizePlayerToBeat On |options: On, Off, Toggle|
+|TapByCueClick|TapByCueClick On |options: On,Off, Toggle|
+|TimelineAddMarker|TimelineAddMarker |
+|TimelineEnableTC|TimelineEnableTC|
+|TimelineFirstTab|TimelineFirstTab|
+|TimelineJumpDelta|TimelineJumpDelta 1|one second|
+|TimelineJumpToEnd|TimelineJumpToEnd|
+|TimelineJumpToStart|TimelineJumpToStart|
+|TimelineLastTab|TimelineLastTab|
+|TimelineMarker|TimelineMarker|
+|TimelineNextEditPoint|TimelineNextEditPoint|
+|TimelineNextMarker|TimelineNextMarker|
+|TimelineNextTab|TimelineNextTab|
+|TimelinePlay|TimelinePlay|
+|TimelinePlayFromMarker|TimelinePlayFromMarker ""|
+|TimelinePrevEditPoint|TimelinePrevEditPoint|
+|TimelinePrevMarker|TimelinePrevMarker|
+|TimelinePrevTab|TimelinePrevTab|
+|TimelineQuickSave|TimelineQuickSave|
+|TimelineSetPos|TimelineSetPos 10|jump to second 10|
+|TimelineSetTabIndex|TimelineSetTabIndex|
+|TimelineSetTabName|TimelineSetTabName "MyShow"|
+|TimelineSetViewRange|TimelineSetViewRange 1,5|from s to 5 second|
+|TimelineShiftViewRange|TimelineShiftViewRange 1|one second shift|
+|TimelineShowItNow|TimelineShowItNow 1|set online mode for timeline editor|
+|TimelineStop|TimelineStop|
+|TimerBeat|TimerBeat|
+|ToggleCell|Toggle|start/stop current cell|
+|ToggleCue|ToggleCue 1,1|
+|ToggleFX|ToggleFX 1|Layer number: 1..4|
+|ToggleMuteProTrack|ToggleMuteProTrack 1|index(es) or name(s)|
+|ToggleMuteZone|ToggleMuteZone 0|index(es) or name(s)|
+|ToggleMuteZoneOfProjector|ToggleMuteZoneOfProjector 1|1st projector|
+|TogglePrevious|TogglePrevious|"SWAP" button|
+|ToggleSelectFixt|ToggleSelectFixt|
+|ToggleSelectProTrack|ToggleSelectProTrack 1|index(es) (1..N) or name(s)|
+|ToggleSelectProjector|ToggleSelectProjector 1|index(es) (1..N) or name(s)|
+|ToggleSelectZone|ToggleSelectZone 1|zone index, 1..N.|
+|ToggleSoloProTrack|ToggleSoloProTrack 1|index(es) or name(s)|
+|ToggleUCenterPage|ToggleUCenterPage 1 |Relative command. +1 means next page, -1 means previous|
+|ToggleUEditPage|ToggleUEditPage 1|Relative command. +1 means next page, -1 means previous|
+|ToggleUMaxPage|ToggleUMaxPage 1 |Relative command. +1 means next page, -1 means previous|
+|ToggleUPreviewPage|ToggleUPreviewPage 1 |Relative command. +1 means next page, -1 means previous|
+|ToggleURightPage|ToggleURightPage 1 |Relative command. +1 means next page, -1 means previous|
+|ToggleUToolPage|ToggleUToolPage 1 |Relative command. +1 means next page, -1 means previous|
+|Transition|Transition Toggle |ON, OFF, TOGGLE|
+|UnMuteZonesOfProjector|UnMuteZonesOfProjector 1|projector index, 1..N.|
+|UnSelectZone|UnSelectZone 1|zone index, 1..N.|
+|UnSelectZoneName|UnSelectZoneName "Main Graphics"|enter Zone name|
+|UnSoloAllProTrack|UnSoloAllProTrack|
+|UnSoloProTrack|UnSoloProTrack 1|index(es) or name(s)|
+|UnmuteAllProTracks|UnmuteAllProTracks|
+|UnmuteAllZone|UnmuteAllZone|
+|UnmuteProTrack|UnmuteProTrack 1|index(es) or name(s)|
+|UnmuteZone|UnmuteZone 0|index(es) or name(s)|
+|UnselectAllCue|UnselectAllCue|
+|UnselectAllFixt|UnselectAllFixt|
+|UnselectAllProTracks|UnselectAllProTracks|
+|UnselectAllProjectors|UnselectAllProjectors|
+|UnselectAllZones|UnselectAllZones|
+|UnselectFixt|UnselectFixt 0|index(es) or name(s)|
+|UnselectProTrack|UnselectProTrack 1|index(es) (1..N) or name(s)|
+|UnselectProjector|UnselectProjector 1|index(es) (1..N) or name(s)|
+|VLJFX|VljFX 1, Toggle|index of FX-VLJ 1..4, and action: ON, OFF, TOGGLE|
+|Version|version|remote server will get exe file version|
+|VirtualLJ|VirtualLJ Toggle|ON, OFF, TOGGLE|
+|VisiblePoints|VisiblePoints 100|0..100 (percents)|
+|VisiblePointsDelta|VisiblePointsDelta 0|
+|WaitForAudioBeat|WaitForAudioBeat 1|
+|WaitForBeat|WaitForBeat 7, 1|
+|WaitForCellDown|WaitForCellDown 1|
+|WaitForCellUp|WaitForCellUp 1|
+|WaitForChannel|WaitForChannel 1|
+|WaitForCueStart|WaitForCueStart 1 1|
+|WaitForCueStop|WaitForCueStop 1 1|
+|WaitForDmx|WaitForDmx 1|
+|WaitForEvent|WaitForEvent "MyEventName"|
+|WaitForHotKey|WaitForHotKey|waiting for hotkey assigned to this script in Code-tab|
+|WaitForManualBeat|WaitForManualBeat 1|
+|WaitForMidi|WaitForMidi 0x90, -1, -1|
+|WaitForPageChange|WaitForPageChange|
+|WaitForTC|WaitForTC 15,30,0,0|hours, minutes, seconds, ms|
+|WaitForTime|WaitForTime 15,30,0,0|hours, minutes, seconds, ms|
+|WaitForTimePos|WaitForTimePos 21,00,00,00|hours, minutes, seconds, ms|
+|WaitForTimerBeat|WaitForTimerBeat 1|
+|Write|write|
+|WriteLn|writeln "Hello world!"|
+|ZoneFXTimeScale|ZoneFXTimeScale 1,2,1|Layer, Clock multipler, Metronome multiplier|
+|ZoneFXTimeScaleDelta|ZoneFXTimeScaleDelta 0,0,0,0 |
+|ZoneFXTimeShift|ZoneFXTimeShift 1,2,1|Layer, Clock multipler, Metronome multiplier|
+|ZoneFXTimeShiftDelta|ZoneFXTimeShiftDelta 0,0,0,0 |
+|Zoom|Zoom 100|value -100..100|
+|ZoomDelta|ZoomDelta 0|shift zoom value|

Complete Help Docs

User Tools

Site Tools

Differences

Page Tools