Pangolin Wiki

Laser Show Control for Lighting Professionals

User Tools

Site Tools


hardware:fb4:manual

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
hardware:fb4:manual [2020/04/06 17:13]
Bob Varkevisser [Onboard Serial port output for DMX]
hardware:fb4:manual [2020/06/11 19:20] (current)
Line 341: Line 341:
  
 ==== Onboard DMX out ==== ==== Onboard DMX out ====
 +
 +**The FB4 allows you to utilize the FB4’s onboard Serial port as DMX output for, for example gratings. 
 +This connection is not meant to control external DMX fixtures as this is not a standard DMX signal.
 +**
 +
 The FB4 hardware is equipped with a serial port that is capable of generating DMX output for control of DMX controllable hardware inside Laser Projectors. This DMX function does not require the FB4 DMX daughter board to operate. You can use this serial port for control for diffraction gratings and other hardware internal to the laser projector. This means that when the in the software DMX is enabled, the FB4 is able to forward incoming DMX signals through the serial port. The FB4 hardware is equipped with a serial port that is capable of generating DMX output for control of DMX controllable hardware inside Laser Projectors. This DMX function does not require the FB4 DMX daughter board to operate. You can use this serial port for control for diffraction gratings and other hardware internal to the laser projector. This means that when the in the software DMX is enabled, the FB4 is able to forward incoming DMX signals through the serial port.
  
hardware/fb4/manual.txt · Last modified: 2020/06/11 19:20 (external edit)