Differences

This shows you the differences between two versions of the page.

--- beyond:qshift [2023/11/06 06:44] – Lyra Letournea
+++ beyond:qshift [2024/01/16 13:22] (current) – Bob Varkevisser
@@ Line 1: / Line 1: @@
-====== Q Shift ======
+====== Q-Shift ======
 Q-Shift is a way to utilize "offset effects" quickly and easily for your live shows. It resides within the "Quick tabs" area of BEYOND. Unlike offset effects within cues or within effects, Q-shift utilizes the "Live Control" parameters from the "Live Control" tab in the right tabs area. Because of this, these offset effects have much lower CPU requirements are run much faster than other cue based, or effect based offset effects.
@@ Line 7: / Line 7: @@
 ===== The Pads =====
-Q-Shift is controlled with touch pads, that operate on a y and x axis. Amog the Y axis you have the effects percentage of utilization, and on the x axis you have an -100 to +100 offset value. The amount of offset is set within the pad properties. The Pads have to modes, 1D mode where it is only the y axis and controls the effect amount, and 2D where both effect amount and shift percentage is selectable. The pads also include 0% and 100% bumper buttons that allow quick and temporary enabling and disabling of the effect live. In 2D mode the shift amount value along the x axis will be maintained and only the effect amount is moved on the bumper buttons. Other parameters of these pads are modifiable in the "Pad Properties" area.
+Q-Shift is controlled with touch pads, that operate on a y and x axis. Amog the Y axis you have the effects percentage of utilization, and on the x axis you have an -100 to +100 offset value. The amount of offset is set within the pad properties. The Pads have two modes, 1D mode where it is only the y axis and controls the effect amount, and 2D where both effect amount and shift percentage is selectable. The pads also include 0% and 100% bumper buttons that allow quick and temporary enabling and disabling of the effect live. In 2D mode the shift amount value along the x axis will be maintained and only the effect amount is moved on the bumper buttons. Other parameters of these pads are modifiable in the "Pad Properties" area.
 {{:beyond:q-shift_pads.png?600|}}