Differences

This shows you the differences between two versions of the page.

--- examples:projector_settings [2026/03/17 17:28] – [Resources for creating your own projector settings] Jesse Bourassa
+++ examples:projector_settings [2026/03/18 17:31] (current) – [Elite 100 Pro IP65] Bob Varkevisser
@@ Line 3: / Line 3: @@
 In our ecosystem, it's important to set the projector settings in BEYOND and Quickshow to ensure your laser is performing optimally. However, we understand it can be difficult to get these settings right, especially if you are new!
-Below, we provide some good projector settings files for your projectors which will protect their longevity, allow them to operate at their best, and reveal colors you never knew existed!
+Below, we provide some good projector settings files for your projectors which will protect their longevity, allow them to operate at their best, and reveal colors you never knew existed!  If you are using BEYOND, you can download the correct file, then assign it to your projector(s) using the process below.  If you are using Quickshow, you will not be able to make use of the Advanced Color Tuning.  In this case, you can adjust your projector settings yourself to match the recommended size, scan rate, and color shift settings.
-These files should work great for all new and existing lasers purchased from Pangolin.  However, as lasers age their colors will shift a bit, so the color tune may need some adjustment for older units.
+These settings should work great for all new and existing lasers purchased from Pangolin.  However, as lasers age their colors will shift a bit, so the color tune may need some adjustment for older units.  Also, while the advanced color tuning will help each unit fill out its own spectrum, you may notice inconsistencies between projectors if you have multiple, as the diodes can vary from projector to projector.  In this case, you can follow the video guides at the bottom to learn how to adjust the tuning yourself.  Usually, all that is needed is a slight adjustment to the white balance.
 ===== How to use these files =====
@@ Line 33: / Line 33: @@
   * Color Tune: Advanced, Natural White, 30° hues tuned.
   * Anchors: Not Adjusted
-Download:
+[[https://download.pangolin.com/unitylasers/projector-settings/Raw-1.7-DMX.BeyondProjector|Download]]
 ==== Raw 3 DMX/FB4 ====
@@ Line 42: / Line 42: @@
   * Color Tune: Advanced, Natural White, 30° hues tuned.
   * Anchors: Not Adjusted
-DMX Version Download:
+DMX Version: [[https://download.pangolin.com/unitylasers/projector-settings/Raw-3-DMX.BeyondProjector|Download]]
-FB4 Version Download:
+FB4 Version: [[https://download.pangolin.com/unitylasers/projector-settings/Raw-3-FB4.BeyondProjector|Download]]
 ==== Raw 5 DMX/FB4 ====
 {{ :examples:raw_5_dmx_ilda_-5.png?200|}}
@@ Line 52: / Line 52: @@
   * Color Tune: Advanced, Natural White, 30° hues tuned.
   * Anchors: Not Adjusted
-DMX Version Download:
+DMX Version [[https://download.pangolin.com/unitylasers/projector-settings/Raw-5-DMX.BeyondProjector|Download]]
-FB4 Version Download:
+FB4 Version [[https://download.pangolin.com/unitylasers/projector-settings/Raw-5-FB4.BeyondProjector|Download]]
 ==== Raw 10 DMX/FB4 ====
 {{ :examples:raw_10_dmx-11.png?200|}}
@@ Line 62: / Line 62: @@
   * Color Tune: Advanced, Natural White, 30° hues tuned.
   * Anchors: Not Adjusted
-DMX Version Download:
+DMX Version [[https://download.pangolin.com/unitylasers/projector-settings/Raw-10-DMX.BeyondProjector|Download]]
-FB4 Version Download:
+FB4 Version [[https://download.pangolin.com/unitylasers/projector-settings/Raw-10-FB4.BeyondProjector|Download]]
 ===== Elite Pro IP54 Series =====
 ==== Elite 3 Pro ====
+{{ :examples:elite_3_pro_3.png?200|}}
+  * Size: 95x95
+  * Scanrate: 30kpps
+  * Color Shift: 4
+  * Color Tune: Advanced, Natural White, 30° hues tuned.
+  * Anchors: Not Adjusted
+[[https://download.pangolin.com/unitylasers/projector-settings/Elite-3-Pro.BeyondProjector|Download]]
 ==== Elite 5 Pro ====
 {{ :examples:elite_5_pro_3.png?200|}}
@@ Line 76: / Line 82: @@
   * Color Tune: Advanced, Natural White, 30° hues tuned.
   * Anchors: Not Adjusted
-Download:
+[[https://download.pangolin.com/unitylasers/projector-settings/Elite-5-Pro.BeyondProjector|Download]]
 ===== Elite Pro IP65 Series =====
@@ Line 86: / Line 92: @@
   * Color Tune: Advanced, Natural White, 30° hues tuned.
   * Anchors: Not Adjusted
-Download:
+[[https://download.pangolin.com/unitylasers/projector-settings/Elite-10-Pro.BeyondProjector|Download]]
 ==== Elite 20 Pro IP65 ====
 {{ :examples:elite_20_pro_3.png?200|}}
@@ Line 94: / Line 100: @@
   * Color Tune: Advanced, Natural White, 30° hues tuned.
   * Anchors: Not Adjusted
-Download:
+[[https://download.pangolin.com/unitylasers/projector-settings/Elite-20-Pro.BeyondProjector|Download]]
 ==== Elite 30 Pro IP65 ====
 {{ :examples:elite_30_40_pro_3.png?200|}}
@@ Line 102: / Line 108: @@
   * Color Tune: Advanced, Natural White, 30° hues tuned.
   * Anchors: Not Adjusted
-Download:
+[[https://download.pangolin.com/unitylasers/projector-settings/Elite-30-Pro.BeyondProjector|Download]]
 ==== Elite 40 Pro IP65 ====
 {{ :examples:elite_30_40_pro_3.png?200|}}
@@ Line 110: / Line 116: @@
   * Color Tune: Advanced, Natural White, 30° hues tuned.
   * Anchors: Not Adjusted
-Download:
+[[https://download.pangolin.com/unitylasers/projector-settings/Elite-40-Pro.BeyondProjector|Download]]
 ===== Elite Pro IP65 Series HP =====
@@ Line 120: / Line 126: @@
   * Color Tune: Advanced, Natural White, 30° hues tuned.
   * Anchors: Not Adjusted
-Download:
+[[https://download.pangolin.com/unitylasers/projector-settings/Elite-60-Pro.BeyondProjector|Download]]
 ==== Elite 100 Pro IP65 ====
 {{ :examples:elite_pro_100w_2.png?200|}}
@@ Line 128: / Line 134: @@
   * Color Tune: Advanced, Natural White, 30° hues tuned.
   * Anchors: Not Adjusted
-Download:
+[[https://download.pangolin.com/unitylasers/projector-settings/Elite-100.BeyondProjector|Download]]
 ===== Resources for creating your own projector settings =====