Complete Help Docs

Laser Show Technology for Lighting Professionals

User Tools

Site Tools

You are here: The Pangolin Wiki » Guided Learning » How to Align Your Laser Projector
guided-learning:alignment

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
guided-learning:alignment [2026/05/05 18:31] – [How to Align Your Laser Projector] Jesse Bourassaguided-learning:alignment [2026/05/05 22:27] (current) – [General Alignment Practices] Jesse Bourassa
Line 192: Line 192:
 If you are aligning the beam on site, or cannot get a bounce or a friend to call the movements out, using optical magnifiers like binoculars or a spotting scope can help get a good view of the beam at a great distance.  If you are aligning the beam on site, or cannot get a bounce or a friend to call the movements out, using optical magnifiers like binoculars or a spotting scope can help get a good view of the beam at a great distance. 
  
-## 33 Show a technician looking at a target at distance using binoculars ##+{{ :guided-learning:laser_spotter.jpg?direct&600 |technician looking at a target at distance using spotting scope}}
  
 === Eye Protection === === Eye Protection ===
Line 198: Line 198:
 If you are opening a laser, and especially a module, to do an alignment, it can be easy to accidentally use a reflective tool and shine full power beams all over the place. We recommend all users, but especially beginners, use some sort of power-reducing eyewear to reduce their risk while aligning. The recommended pair of eye protection for this kind of job can be found on the Pangolin website: If you are opening a laser, and especially a module, to do an alignment, it can be easy to accidentally use a reflective tool and shine full power beams all over the place. We recommend all users, but especially beginners, use some sort of power-reducing eyewear to reduce their risk while aligning. The recommended pair of eye protection for this kind of job can be found on the Pangolin website:
  
-## Technician Laser Safety Glasses ADD LINK HERE ##+[[https://pangolin.com/products/technician-laser-safety-glasses|Laser Technician Safety Glasses]]
  
 {{ :guided-learning:34_laser_safety_goggles.jpg?direct&600 |a technician looking at the inside of a laser, with safety goggles}} {{ :guided-learning:34_laser_safety_goggles.jpg?direct&600 |a technician looking at the inside of a laser, with safety goggles}}
Line 212: Line 212:
 Sometimes digital tools which can display your beam on a screen can be a useful less eye straining then looking directly at the beam. Often these setups are used by the manufacturers in their production to ease the strain on their employees and sometimes even get more accurate then the average eye can. One of the easiest solutions to get into this technology is with the **Beam Analyzer**, which can be purchased on the Pangolin website. Sometimes digital tools which can display your beam on a screen can be a useful less eye straining then looking directly at the beam. Often these setups are used by the manufacturers in their production to ease the strain on their employees and sometimes even get more accurate then the average eye can. One of the easiest solutions to get into this technology is with the **Beam Analyzer**, which can be purchased on the Pangolin website.
  
-##Beam Analyzer Measurement Device ADD LINK ## +[[https://pangolin.com/products/beam-analyzer-measurement-device|Beam Analyzer]]
- +
-## 36 Show a beam in the beam analyzer misaligned ##+
  
 === Make Sure Your Optics Are Clean === === Make Sure Your Optics Are Clean ===
Line 220: Line 218:
 Before performing an alignment, it is best to ensure that your optics are clean and free of any debris.  Dirty optics can lead to issues with the output that make alignment more difficult and, in worst case scenarios, could cause damage to the optics while the laser is on.  Laser light passing through optics should generate little-to-no scattering or "shine". If the beams seem bright when they pass through a dichroic filter or the output window, that optic is likely dirty.  Please refer to our guides on cleaning your optics to ensure they are clean before performing alignment: Before performing an alignment, it is best to ensure that your optics are clean and free of any debris.  Dirty optics can lead to issues with the output that make alignment more difficult and, in worst case scenarios, could cause damage to the optics while the laser is on.  Laser light passing through optics should generate little-to-no scattering or "shine". If the beams seem bright when they pass through a dichroic filter or the output window, that optic is likely dirty.  Please refer to our guides on cleaning your optics to ensure they are clean before performing alignment:
  
-## ADD CLEANING GUIDE ##+[[cleaning|How to Clean your Laser Projector]]
  
 === Use the Lowest Power Necessary === === Use the Lowest Power Necessary ===
guided-learning/alignment.1777998680.txt · Last modified: by Jesse Bourassa
Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki