Differences

This shows you the differences between two versions of the page.

--- quickshow:projector_settings [2023/03/24 19:26] – Lyra Letournea
+++ quickshow:projector_settings [2026/05/11 17:26] (current) – [Window Options] Bob Varkevisser
@@ Line 15: / Line 15: @@
 **Copy** and **Paste** Buttons allow you to copy all  settings from one piece of hardware to others. This can be useful if you have 4 of the exact same lasers and get one tuned perfectly, you can paste to the rest of the hardware and they will all likely be just about the same. Saving you time from doing them all separately.
-The **Key** Button allows you to choose which piece of hardware will be used for unlocking of locked content. This does not relate to your software license or key. That is done under the "Registration" tab of QuickShow. You likely will only encounter this if you buy hardware from designers who may lock the sold content to your hardware.
+The **Key** Button allows you to choose which piece of hardware will be used for unlocking of locked content. This does not relate to your software license or key. That is done under the "Registration" tab of QuickShow. You likely will only encounter this if you buy laser content from designers who may lock the sold content to your hardware.
 ==== Test Patterns ====
@@ Line 74: / Line 74: @@
 **Use nonlinear spacing for blanked lines** - nonlinear spacing places more points near the beginning and ending of a line and a bigger distance between points in the center of a blanked line. As a rule, this option works better for blanked lines.
-==== Anchors ====
+==== Anchors ====
 As a rule, a frame is a sequence of multiple visible vectors/points and blank line(s) in between.  The place where a blanked line becomes visible, or a visible line turns to a blanked line requires additional anchor points for vectors.