Differences

This shows you the differences between two versions of the page.

--- tools:lcflash:object_point_spacing [2021/04/23 13:30] – [Use default settings] Bob Varkevisser
+++ tools:lcflash:object_point_spacing [2021/04/23 13:31] (current) – [See Also] Bob Varkevisser
@@ Line 52: / Line 52: @@
 **AutoSpace Curve detect** controls the sensitivity to curves. The minimum setting of 0 means no curves are detected -- the visible density for straight lines is always used. The maximum setting of 100, means Lasershow Converter FLASH will place a high density on lines even if they are only slightly curved.
-Note that with all of this flexibility, you have the power to create any kind of point placement that you desire. If you desire strictly even intensity over the entire image and "linear" point placement, simply turn curve detect off by setting this to 0. However, if you don’t mind some brightness variation in return for lower point counts in imagery, set this to a value of 20 or higher. For more information about variable vs. constant point density, see the Tips: Point spacing for lines topic.
+Note that with all of this flexibility, you have the power to create any kind of point placement that you desire. If you desire strictly even intensity over the entire image and "linear" point placement, simply turn curve detect off by setting this to 0. However, if you don’t mind some brightness variation in return for lower point counts in imagery, set this to a value of 20 or higher. For more information about variable vs. constant point density, see the [[tools:lcflash:point_spacing_for_lines|Tips: Point spacing for lines]] topic.
 ===== Beam path for this object =====
@@ Line 69: / Line 69: @@
 ===== See Also =====
-  * Objects Library
+  * [[tools:lcflash:objects_library|Objects Library]]
-  * Render Settings: Point Spacing
+  * [[tools:lcflash:render_settings_point_spacing|Render Settings: Point Spacing]]
-  * Tips: Point spacing for lines
+  * [[tools:lcflash:point_spacing_for_lines|Tips: Point spacing for lines]]
 ----