Complete Help Docs

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== FB4 and OSC ======


FB4 can be controlled through OSC. If you use the right syntax, you will be able to control all FB4's in your network.

===== FB4 Address prefix =====

The FB4 OSC address is based on the serial-number. 
The OSC address is buildup as follow:

  /FB4-*serial number*/*command* *value*

  /*serial number*/*command* *value*

The address must contain contains 5 digits. So if the FB4 serial is 1234, the address becomes 01234.

The following examples shows how you can set the parameter mode on FB4 with serial 2356.

  /FB4-02356/operation_mode 1

  /02356/operation_mode 2
  
===== FB4 OSC Command List =====

^ OSC Tag ^ Minimum ^ Maximum ^ Symbol values ^
|operation_mode|1|9| 1 = BEYOND & QuickShow, 2 = ILDA, 3 = DMX, 4 = ARTNET, 5 = Autoplay, 6 = Timecode, 7 = Slave mode, 8 = Test mode, 9 = sACN | 
|Master Brightness|0|100| |
|master_size|20|100| |       
|master_x_size|20|100| |       
|master_y_size|20|100| |      
|master_x_invert|NO|YES|NO = 14006, YES = 14007|
|master_y_invert|NO|YES|NO = 14006, YES = 14007|
|master_xy_swap|NO|YES|NO = 14006, YES = 14007|
|geo_x_size|-100|100| |       
|geo_y_size|-100|100| |
|geo_x_position|-100|100| |
|geo_y_position|-100|100| |       
|geo_z_rotation|0|360| |            
|geo_x_keystone|-100|100| |
|geo_y_keystone|-100|100| |
|geo_x_shear|-100|100| |               
|geo_y_shear|-100|100| |
|geo_hr_x_size|-32767|32767| |
|geo_hr_y_size|-32767|32767| |   
|geo_hr_x_position|-32767|32767| |   
|geo_hr_Y_position|-32767|32767| |   
|geo_hr_z_rotation|0|65535| |    
|color_shift|0|7| |               
|color_red|0|100| |                 
|color_green|0|100| |              
|color_blue|0|100| |                  
|color_darkblue|0|100| |
|color_yellow|0|100| |
|color_cyan|0|100| |
|scanguard_enable|NO|YES|NO = 14006, YES = 14007|
|scanguard_horizon_level|0|100| |   
|scanguard_horizon_angle|-45|45| |   
|scanguard_minimum_velocity|0|300| |
|scanguard_dwell_time|1|300| |     
|scanguard_attenuation|SOFT|HARD|SOFT = 14010, HARD = 14011|
|scanguard_x_invert|NO|YES|NO = 14006, YES = 14007|
|scanguard_y_invert|NO|YES|NO = 14006, YES = 14007|
|scanguard_xy_swap|NO|YES|NO = 14006, YES = 14007|
|dmx_channel|1|512| |          
|dmx_termination|OFF|AUTO|OFF = 14003, ON = 14004, AUTO = 14005|
|dmx_profile|FB3|FB4|FB3 = 14021, FB4 = 14022|
|serial_mode|0|3| |          
|dmx_patch_from|1|512| |          
|dmx_patch_to|1|512| |             
|dmx_patch_length|1|512| |           
|artnet_universe|0|999| |           
|artnet_channel|1|512| |            
|dmx_artnet_timeout|0|50| |        
|network_autoip|NO|YES|NO = 14006, YES = 14007|
|network_ip_address|-2147483648|2147483647| |
|add1|0|255| |          
|add2|0|255| |
|add3|0|255| |              
|add4|0|255| |              
|network_subnet_mask|-2147483648|2147483647| |
|sub1|0|255| | 
|sub2|0|255| |                       
|sub3|0|255| |                       
|sub4|0|255| |                       
|autoplay_playback|NONE|LIST|NONE = 14012, CUE = 14013, LIST = 14014|
|autoplay_file_index|1|999|       
|autoplay_end_action|STOP|LOOP|STOP = 14016, LOOP = 14017|
|rtc_year|2000|2099| |     
|rtc_month|1|12| |
|rtc_day|1|31| |                   
|rtc_hour|0|23| |                  
|rtc_minutes|0|59| |
|rtc_seconds|0|59| |               
|timecode_offset_h|0|12| |        
|timecode_offset_m|0|59| |        
|timecode_offset_s|0|59| |          
|timecode_offset_ms|0|999| |        
|timecode_file_index|1|999| |          
|kvant_magic_button|0|1| |
Complete Help Docs

User Tools

Site Tools

Page Tools
