Fulltext results:

FB4 SE Manual

49 Hits, Last modified: 15 months ago

: The XLR 5 ports can not be used to generate DMX output.// //Note: It is not possible to send content fr... erations of the master settings do not affect the output resolution of the software applications. **[Maste... ser. * [**Brightness**] Determines the maximum output brightness of the laser. * [**Master size**] D... n image. * [**Invert X**] Inverts the complete output area on the X ax. * [**Invert Y**] Inverts the

FB4 Scan-Fail (Scan Guard) For Audience Scanning

8 Hits, Last modified: 3 years ago

atic laser beams will be blanked as soon as laser output meets certain specific defined settings. Though ... ored by the scan-fail safeguard, and permitted to output into the area defined above the audience. ==== H... how the scan-fail safeguard reacts to the scanner output. ==== Min Velocity (0 – 300) ==== The minimum velocity that the beam is permitted for output can be adjusted with this parameter. This paramet

Status bar color scheme of FB4

7 Hits, Last modified: 4 years ago

and Sample rate. It is impossible to display such output. As example 1000 points at 100 FPS at 30K output. Such notification comes with message “Too long frames”|... 1ts is CPU overload. Software cannot calculate in output time, and it leads to delayed delivery. 2nd is ne... r simpler content, or you can decrease quality of output (Performance Tuning window). The other place is F

FB4 QuickStart Guide

1 Hits, Last modified: 4 years ago

ughterboard are transmitted to the color and axis output connectors on FB4. In this mode, native geometric