Fulltext results:

Networking for Lasershows, BEYOND, and Entertainment

5 Hits, Last modified: 3 months ago

- 10.1.4.12/255.255.255.0 - Laser Projectors - 10.1.4.101/255.255.255.0 ... nodes, and laser computers can talk to the laser projectors, all within the same wiring infrastructure. This ... and if all you have connected to your pc is laser projectors through an “Unmanaged” switch, everything should ... When BEYOND calculates all the frames for all the projectors in your setup, it live calculates everything, and

Latest Features

2 Hits, Last modified: 8 months ago

to split the projection of graphics over multiple projectors. The Technology is contained in the FB4 hardware ... effects, to improve the appearance when used with projectors having scanners with poor performance. * We al

The Configuration Dialog Box

3 Hits, Last modified: 8 months ago

u want this bar to be, if you have a lot of laser projectors conencted, this can help you see them all. Maximu... == **Use Optimal performance mode for 10 or more projectors** - In "Performance tuning" you have the ability ... xaggerated quickly. By default, when more then 10 projectors are connected, BEYOND automatically goes to "opti

How to use the 3D Preview in BEYOND @beyond:video

1 Hits, Last modified: 10 months ago

gs Pannel: Gause Screen * 1:55 Settings Pannel: Projectors * 2:42 Setting up your Preview * 3:22 Command

Art-net DMX and sACN

1 Hits, Last modified: 10 months ago

in very large scale laser setups usually over 40 projectors. We have a full tutorial and manual for this in

TV Mode

4 Hits, Last modified: 10 months ago

number of calculations equal to sum of FPS of all projectors. It may lead to 100s of 1000s calculations per se... milar effect has Distributed scanning technology. Projectors share the calculation, and it in fact it decrease... Also-To. When you do Also-To and want to sync the projectors – TV mode might help, because all projectors synchronized. Overall – consider TV mode as switch between fixe

BEYOND TimeLine Guide

1 Hits, Last modified: 12 months ago

link|}} **Projector preview** displays output by projectors: {{:beyond:beyondtimelineeditor34.png?nolink|}}

3D Preview

15 Hits, Last modified: 12 months ago

t tree you have to main categories, the Room, and Projectors. Select each to reveal its settings. While the room is default, the projectors within the projector group are based on what hardware, Demo Projectors or Emulasers are in the hardware list. This is to... fe. You can select multiple screens, or multiple projectors at the same time for modifying their parameters.