Fulltext results:
- FB4 SE Manual @hardware:fb4
- power cycle. When starting up the FB4 the first time, the default **[Operation Mode]** is **[BEYOND/QS... ry. A battery can be installed to enable the real-time clock. Date and time can be setup through the QuickShow or BEYOND FB4 Export utility. The battery type ... [**Scan Guard**] * [**FB4 Device Info**] ==== Time Code ==== The **[Time code]** mode allows you to
- Status bar color scheme of FB4 @hardware:fb4
- CPU overload. Software cannot calculate in output time, and it leads to delayed delivery. 2nd is network congestion. Data cannot be delivered in time from PC to FB4.| ===== Icon Legend ===== ^ Icon... s. ==== Software speed ==== Laser output is real time process. However, calculation and communication takes some times. Longer time inject lag but help to avoid flickering in case o
- Hardware connection diagrams
- each laser can do something different at the same time, because they each have their own hardware connec... h, both lasers will do the same thing at the same time. {{ :hardware:fb4e_shared_control_setup.png?direc... each laser can do something different at the same time, because they each have their own hardware connec... each laser can do something different at the same time, because they each have their own hardware connec
- FB4 Scan-Fail (Scan Guard) For Audience Scanning @hardware:fb4
- ases as larger numbers are specified. ==== Dwell Time (0 – 999) ==== This parameter allows the user to specify the time in ms that the laser effect may output at the min... city before shutting the output off. ==== Rescan Time (0 - 999) ==== This parameter is not actually re... tics, but instead refers to the maximum amount of time the FB4 should rescan the network connection, in
- FB4 QuickStart Guide @hardware:fb4
- tting started ===== When using FB4 for the first time. Take the following steps: - Make sure the inc... ric correction can be applied natively on FB4. **Time Code** In time code mode, FB4 plays content from the SD card in sync with an external timecode source.
- Firmware updates
- firmware version in the connected hardware every time the program is started, and offers to update the ... controller has the correct firmware build, every time it is connected. ===== FB4 Firmware Update Deta
- FB4 16 Channel DMX Profile layout @hardware:fb4
- el fixture profiles are not available at the same time. ^Channels^Value^Function^Description^Width^ |1
- FB4 and OSC @hardware:fb4
- nguard_minimum_velocity|0|300| | |scanguard_dwell_time|1|300| | |scanguard_attenuation|SOFT|HARD|SO
- FB4 BEAM CONTENT PACK PACKET @hardware:fb4
- Use this if you are on site and do not have much time available. Each page has these shapes: {{:hardwa
- FB4 Content Pack @hardware:fb4
- o this on a show site. If you don’t have a lot of time and want to get going quickly, We recommend using