Fulltext results:
- Object Tag: Point Spacing
- ====== Object Tag: Point Spacing ====== This panel allows you to control the point placement on an object-by-object basis. Although ... scenes, it is still very useful to specified the point placement settings on an object-by-object basis. {{:tools:lc4d:image-point-spacing.gif?nolink|}} **Note**: The numbers show
- Tips: Point spacing for lines
- ====== Tips: Point spacing for lines ====== Variable vs. constant point density The default settings for **AutoSpace Distance** (shown below) place a higher point density in areas of the image that have curved lines, and a lower point density in areas of an image that have straight l
- Tips: Point spacing for objects
- ====== Tips: Point spacing for objects ====== Although Lasershow Converter 4D's default((There is no sp... ults for most scenes, it is still handy to assign point placement settings on an object-by-object basis. ... ts ===== In the New York scene below, the arrows point to lines on the buildings that have a fairly shal... . {{:tools:lc4d:psfo1.gif?nolink|}} The default point spacing settings have the **Corner points 165-170
- LC4D
- red, animated parameters are indicated with a red point. * [[tools:lc4d:object tag about|About object... r Settings]] * [[tools:lc4d:object tag object point spacing|Object Point Spacing]] * [[tools:lc4d:object tag object soft line|Object Soft Line]] * [... lor and path consistency]] * [[tools:lc4d:tip point spacing for lines|Tips: Point spacing for lines]]
- Tips: Color and path consistency
- s discussed in the [[tools:lc4d:object_tag_object_point_spacing|Object Point Spacing]] topic, it is highly desirable for the beam path to stay consistent from o... ject, by using the [[tools:lc4d:object_tag_object_point_spacing|Object point spacing]] panel **Beam path for this object** drop-down list. Note that whatever o
- Post-Render Effect: Laser Output, Preview Options and Save Functions
- ximum of 30 frames per second if the sample rate (point output speed) was set to 30,000 points per second... re put in a blanked line that leads from the last point back to the first point in the frame. ===== Zone ===== This option allows you to specify which zone wi
- Post-Render Effect: Laser Output, Preview Options and Save Functions
- ximum of 30 frames per second if the sample rate (point output speed) was set to 30,000 points per second... re put in a blanked line that leads from the last point back to the first point in the frame. ===== Zone ===== This option allows you to specify which zone wi
- Tips: Beam path optimization
- ct** (found in the [[tools:lc4d:object_tag_object_point_spacing|Object point spacing panel]]) controls how the beam travels. ===== Controlling the beam path wi
- Tips: Scan speeds and LC4D
- settings by looking in the picture on the Object Point Spacing topic page. ===== Better scanners give b
- Lasershow Converter 4D Renderer
- d. {{:tools:lc4d:step4-3.gif?nolink|}} At this point, you should be able to move the Time Slider back
- Object Tag: Line Types
- ou will see this object number updated. The main point to understand is that the object drawn first is t
- What's new
- in, we have removed support for LD2000. From this point forward, Lasershow Converter 4D will only work wi