Differences

This shows you the differences between two versions of the page.

--- quickshow:projector_settings [2020/06/11 19:20]
127.0.0.1 external edit
+++ quickshow:projector_settings [2021/05/04 21:22]
Bob Varkevisser [Setting the Scan rate]
@@ Line 19: / Line 19: @@
 {{:quickshow:projectorsettings21_4_0.jpg|}}
+**Wide Angle Compensation**: Wide angle compensation is a new check box in your scan speed tab of projector settings which will automatically slow scan speeds down when projecting at large scan angles. This has the benefit of lowering the heat inside the scanners, correcting “bent” corners in projection, and extending the life of your scanners.
+For using Wide Angle Compensation, you will set the scan speed at the rated scan speed of your scanners, and when you project at larger angles beyond 50% size, the compensation may come into play. It automatically determines parts of frames which may be difficult for the scanner and slows the scan speeds down ever so slightly to make the image correct at large sizes and remove heat from the scanner. The number of points this tool adds to frames is very minimal and often won’t be noticed so for most users its best to keep this enabled.
+This tool has been tested on a wide variety of projectors and scanning systems including ultra-low cost scanners you may find in budget systems to high end Saturn scanners from [[https://pangolin.com|Pangolin]] and [[https://scannermax.com|ScannerMax]] like our Saturn 1 Series of scanners.
 ===== Setting up the colors =====

Complete Help Docs