Fulltext results:
- FB4 SE Manual
- code]** mode allows you to start the FB4 to play based on an incoming Artnet Time code signal (ATC for ... code setup**] offers the ability to start a show based on an incoming Artnet timecode signal. The FB4 w... gh the FB4. {{:hardware:fb4:fb4se17.png|}} The “Base address” defines the positions of the 1st channel... he serial port, so in the example above we choose base address 1 with 4 channels to send, so BEYOND will
- FB4 39 Channel DMX Profile layout
- (1 = cue 1, 255 = cue 255)|8 Bit| |16 ((If a BPM based effects is exported at 100BPM, and you want to h
- FB4 Scan-Fail (Scan Guard) For Audience Scanning
- hen the beam travels too slowly. The threshold is based upon the combined velocity of both the X and Y m
- FB4 16 Channel DMX Profile layout
- -223 Cue 48\\ 225-255 Repeat|8 Bit| |4 ((If a BPM based effects is exported at 100BPM, and you want to h
- FB4 and OSC
- FB4 Address prefix ===== The FB4 OSC address is based on the serial-number. The OSC address is buildu
- FB4 BEAM CONTENT PACK PACKET
- othly completing circles.** **Each cue Is a beat based cue, and was exported at 100BPM, default dmx val
- FB4 Content Pack
- by laser designers or other programmers, will be based on the designer. However the final file should b