Fulltext results:
- Latest Features
- ut]] using the ENTTEC DMX USB PRO device. The DMX Channel assignment is the same as that for the FB3. *
- Projector Settings
- t the minimum and maximum voltages for each color channel with the **color output levels**. If your laser h... g, you can lower the maximum power output on each channel to do a basic color calibration. Its unlikely you
- MIDI Settings
- ed at the top. {{:quickshow:midi_p2.png|}} ==== Channel and Page ==== QuickShow supports up to four MIDI... Show page, and all of the effects on another. The Channel and Page drop down list boxes allow you to contro... s will not be echoed. **Important Note:** If the Channel is not set to "Use original Channel" then events that are "echoed" will have their channel number modified
- QuickDMX
- **QuickDMX** tool can be used to output a single channel or channels continually (thus forming a DMX "scene" and requiring only a single Step), typically the **Qui... itself) to a cue. ===== Changing the name of DMX channels ===== You can give each channel a different name by clicking the right mouse button on the label below t
- Parametric Image Editor
- from an external source such as Audio, DMX, MIDI, Channels and so on. It makes the Parametric Image reactiv
- DMX Settings
- n. You will also need to specify the Starting DMX Channel (address) where you want QuickShow to appear with... {:quickshow:dmx_2.png|}} As shown above, the DMX Channel Assignment for QuickShow is exactly the same as t... tion. You will also need to specify the Number of channels that QuickShow should transmit. The default is 512 channels. {{:quickshow:dmx_3_4_0.png|}} The DMX Output