Fulltext results:
- Networking for Lasershows, QuickShow, and Entertainment
- sses for “private” networks. With this schedule, controllers could be configured to be something like - L... er. Over the next couple milliseconds every laser controller in the rig receives their frame, and waits for th... output and things like distributed scanning. The controllers just get a heartbeat signal that keeps all their... ut of QuickShow, but doesn’t make it to the laser controllers before the “display time” they are expecting the
- Latest Features
- pport for FB4XE**, From Build 5.2 1718, The FB4XE controller is supported. * **Support for FB4SE**, From Build 5.2 1736, FB4SE controller with serial higher than 50000 are supported. *... appear on the status bar. Just right-click on the controller/projector on the status bar and you will be able
- DMX Settings
- r that, specify the COM port where the DMX-to-USB controller is connected. QuickShow gives you the ability to... e FB3-SE DMX daughter board. This allows external controllers that are already familiar with the FB3 to easily... Currently QuickShow supports only the DMX USB PRO controller from the company ENTTEC. This is a very popular d
- MIDI Settings
- includes extensive support for MIDI keyboards and controllers. All aspects of MIDI are setup with the MIDI Set... MIDI Input devices, such as keyboards or "analog controllers". If multiple MIDI Keyboards are used, QuickShow
- Toolbar
- |}} In order to enable output from the FB3 laser controller, the Enable Laser Output button must be pressed.
- Status bar color scheme of FB4
- |White|FB4 connected and operating normally| |Red|controller disconnected| |Yellow|TV mode is ON. TV mode is f
- Toolbar overview
- |}} In order to enable output from the FB3 laser controller, the **Enable Laser Output** button must be press
- Enable Laser Output button
- === In order to enable output from the FB3 laser controller, the Enable Laser Output button must be pressed.
- QuickShow System requirements
- M" series cpu// Big projects with multiple laser controllers will require a computer with higher specificatio
- How to Use Midi and DMX @quickshow:video
- This video shows the basics how to work with Midi controllers and DMX. See how you can connect and map your ow
- Controlling multiple lasers
- ows you to control up to nine* separate FB3 laser controllers connected to the computer via USB (normally usin