Fulltext results:
- FB4 SE Manual
- [BEYOND/QS]**, Change **[Artnet Settings]** >> **[Timeout]** to 3.0). ===== Features ===== * 100Mb... power cycle. When starting up the FB4 the first time, the default **[Operation Mode]** is **[BEYOND/QS... to start and play content at specific predefined times or when the power of the laser is turned on. Aut... d content needs to be played on specific date and times, installation of a battery is needed. As deliver
- Status bar color scheme of FB4
- CPU overload. Software cannot calculate in output time, and it leads to delayed delivery. 2nd is network congestion. Data cannot be delivered in time from PC to FB4.| ===== Icon Legend ===== ^ Icon... s. ==== Software speed ==== Laser output is real time process. However, calculation and communication takes some times. Longer time inject lag but help to avoid flick
- FB4 and OSC
- nguard_minimum_velocity|0|300| | |scanguard_dwell_time|1|300| | |scanguard_attenuation|SOFT|HARD|SO... |artnet_channel|1|512| | |dmx_artnet_timeout|0|50| | |network_autoip|NO|YES|NO = 14... utes|0|59| | |rtc_seconds|0|59| | |timecode_offset_h|0|12| | |timecode_offset_m|0|59| | |timecode_offset_s|0|59| | |t
- FB4 QuickStart Guide
- tting started ===== When using FB4 for the first time. Take the following steps: - Make sure the inc... of cues immediately after power-up or at specific times. In this mode, geometric correction can be applied natively on FB4. **Time Code** In time code mode, FB4 plays content from the SD card in sync with an external timecode source.
- FB4 Scan-Fail (Scan Guard) For Audience Scanning
- ases as larger numbers are specified. ==== Dwell Time (0 – 999) ==== This parameter allows the user to specify the time in ms that the laser effect may output at the min... city before shutting the output off. ==== Rescan Time (0 - 999) ==== This parameter is not actually re... tics, but instead refers to the maximum amount of time the FB4 should rescan the network connection, in
- FB4 Content Pack
- can be up to 1GB, keep this in mind for download times when you are on a job site. Downloading of cust... rdware-browser.png?400|Hardware Browser}} Upload times can vary a lot, please keep this in mind if you ... o this on a show site. If you don’t have a lot of time and want to get going quickly, We recommend using
- FB4 16 Channel DMX Profile layout
- el fixture profiles are not available at the same time. ^Channels^Value^Function^Description^Width^ |1
- FB4 BEAM CONTENT PACK PACKET
- Use this if you are on site and do not have much time available. Each page has these shapes: {{:hardwa