Fulltext results:
- MIDI Settings
- ed at the top. {{:quickshow:midi_p2.png|}} ==== Channel and Page ==== QuickShow supports up to four MIDI... Show page, and all of the effects on another. The Channel and Page drop down list boxes allow you to contro... s will not be echoed. **Important Note:** If the Channel is not set to "Use original Channel" then events that are "echoed" will have their channel number modified
- QuickDMX
- **QuickDMX** tool can be used to output a single channel or channels continually (thus forming a DMX "scen... the name of DMX channels ===== You can give each channel a different name by clicking the right mouse butt... he slider, and entering a name. {{:quickshow:dmx_channel_name.png|}} ===== Changing the color and control... respond to the fixture. You can also designate a channel as requiring stepped change or smooth change. For
- Projector Settings
- t the minimum and maximum voltages for each color channel with the **color output levels**. If your laser h... g, you can lower the maximum power output on each channel to do a basic color calibration. Its unlikely you
- DMX Settings
- n. You will also need to specify the Starting DMX Channel (address) where you want QuickShow to appear with... {:quickshow:dmx_2.png|}} As shown above, the DMX Channel Assignment for QuickShow is exactly the same as t
- Latest Features
- ut]] using the ENTTEC DMX USB PRO device. The DMX Channel assignment is the same as that for the FB3. *