Fulltext results:
- Advanced Color Settings @beyond
- rs. Each laser has one color such as red, yellow, green, blue. A typical projector has one to three color... xample, a projector has 4 channels - red, yellow, green and blue. How can Beyond make it work? In the RGB system we make yellow out of red and green. In the case of our example projector, we want to use a yellow laser instead of a mix of red and green. We may also want to get shades of colors, some o
- QuickShow Registration and licensing @quickshow
- istration, and Application is not registered too. Green check “Date is correct” means that clock modifica... e Registration file is correct, all icons will be green and Quickshow will work as normal. ===== Registr... internet Connection or service not available | | GREEN | Connection established. | Middle Line indicate... d. Saving files and laser output is disabled. | | GREEN | Registration found and correct, Quickshow is re
- BEYOND TimeLine Guide @beyond
- k|}} At the left top corner of an Event there is Green triangle. At the right side there is similar red ... here one event (blue rectangle) covers the other (green circle) BEYOND will display the events as they are painted. At first the Green circle, then the Blue rectangle, then back to Green circle. This is not a recommended style of show desi
- BEYOND DMX Server Mode @beyond
- tr> <td width="100"> 24 </td> <td width="100"> Green </td> <td width="100"> 0 </td> <td> 0..255 is 0%..100% of Green. See remark for Alpha channel. </td> </tr> <tr> ... /tr> <tr> <td width="100">24</td> <td width="100">Green</td> <td width="100">0</td> <td>0..255 is 0%..100% of Green. <br /> See remark for Alpha channel.</td> </tr>
- Status bar color scheme of FB4 @hardware:fb4
- tification comes with message “Too long frames”| |Green|FB4 Data FIFO overload. Usually consequence of ne... her FIFO overload. Problem has similar nature as “Green” status color.| |Pink|Delivery delay. Delivered f... le it, and color will go back to normal white | | Green, Cyan | contact Pangolin support, and send log fi
- PASS @safety
- iode driver. * **Pins 11 and 12** correspond to Green+ and Green – color signals respectively. These should be connected to the GREEN input on a PCAOM driver or directly to a laser di
- FB3-QS @hardware
- | | Interlock A | 4 | | Red+ | 5 | 0V to +5V | | Green+ | 6 | 0V to +5V | | Blue+ | 7 | 0V to +5V | | D... | | Interlock B | 17 | | | Red- | 18 | 0V | | Green- | 19 | 0V | | Blue- | 20 | 0V | | Deep blue - ... 3-QS is executing: ^ Led Color ^ status ^ |Solid Green |Powered (connected to USB but no connection to Q
- Status bar color scheme of FB4 @quickshow
- tification comes with message “Too long frames”| |Green|FB4 Data FIFO overload. Usually consequence of ne... her FIFO overload. Problem has similar nature as “Green” status color.| |Pink|Delivery delay. Delivered f... le it, and color will go back to normal white | | Green, Cyan | contact Pangolin support, and send log fi
- FB4 SE Manual @hardware:fb4
- s you to adjust the maximum voltage output * [**Green**] Allows you to adjust the maximum voltage outpu... :fb4se12.png?100|}} ==== Power & SD card status (Green) ==== * **Off** - Device is not powered * **... ltage level^ |1|Color 1 (Red)|0to+5V| |2|Color 2 (Green)|0to+5V| |3|Color 3 (Blue)|0to+5V| |4|Color 4 (De
- Beam Analyzer (LBA-C-100) @accessories
- . Also, you can see the misalignment between red, green, and blue beams. The spot you see here is the ima... nment | Alignment of the red beam relative to the green beam. | | BG alignment | Alignment of the blue beam relative to the green beam. | | RB alignment | Alignment of the red bea
- Status bar color scheme of FB4 @beyond
- tification comes with message “Too long frames”| |Green|FB4 Data FIFO overload. Usually consequence of ne... her FIFO overload. Problem has similar nature as “Green” status color.| |Pink|Delivery delay. Delivered f... le it, and color will go back to normal white | | Green, Cyan | contact Pangolin support, and send log fi
- BEYOND Registration and Licensing @beyond
- a licensed hardware is connected, it will have a green check and notate the hardware serial and what it ... e and time. * **Registration**: If there is a green check, a registration file is located on the pc a
- Tips: Fixing mysterious flickering lines @tools:lcmax
- ictures below, the dimensions of the red, yellow, green and cyan beams were reduced slightly. The reducti... The height, width and length of the red, yellow, green and cyan beams were decreased ever so slightly. T
- Turbo Streaming @beyond
- One pixel is one packet. Normally you should see green dots. If all green – data flows well. If some red – signal of lost packet. Most of parameters are statis
- TimeCode and BEYOND @beyond
- :beyond:timecodeandbeyond3.png?nolink&300|}} The green label “SMPTE TE: XX XX XX XX” is a confirmation ... - Ensure that you see incoming timecode values (green text) in the Preview panel. - Ensure that the T