Fulltext results:
- LC4D
- ogram. It lets you turn 3D computer graphics into laser graphics, quickly and easily. * [[tools:lc4d:i... e renderer turns Cinema 4D frames and scenes into laser-projectable frames and scenes. Here are step-by-s... rol how the objects are interpreted and output as laser lines. * [[tools:lc4d:render Line Color|Line C... the objects are used to control the color of the laser lines. * [[tools:lc4d:render Filter settings|F
- Lasershow Converter 4D Renderer
- Let's create a simple cube and then render it to laser using Lasershow Converter 4D. - Click on the B... ect, every scene or frame can be rendered for the laser output. **Assigning the Render Plug-In:** 1. Op... *Default line color**, Default filter settings, **Laser Output** and **LC4D Help**. These sections are ex... rendering scenes that take full advantage of the laser projector’s 1:1 aspect ratio. (If you are produci
- Post-Render Effect: Laser Output, Preview Options and Save Functions
- ====== Post-Render Effect: Laser Output, Preview Options and Save Functions ====== This section allows y... up from there. Since it is not possible to write laser frame 0 in BEYOND, this is handled as described b... um Points ===== This sets the minimum number of laser points rendered in each frame. This could be hand... the rendered scene. ===== Include Z-axis data in laser frame ===== This allows you to specify whether Z
- Tips: Point spacing for objects
- Converter 4D, you will no longer get a nice round laser path. Instead, you will have a polygon with sharp
- Tips: Beam path optimization
- h optimization ====== The "beam path" is how the laser travels in drawing out all the lines in an image.
- Questions and answers
- are not enough mesh faces, there won't be enough laser lines. For example, if you have a sphere with jus... ) will look. ===== Should I be worried about the laser image having so many points it flickers? ===== F
- Tips: Fixing mysterious flickering lines
- the camera viewport of Cinema 4D, and also in the laser output produced by Lasershow Converter 4D. {{:to... f?nolink|}} The result is perfect and consistent laser output. ===== An alternative solution ===== The... [[tools:lc4d:post-render-effect|Post Render Effect: Laser Output]]. ---- [[tools:lc4d:start|Go Back]]
- Tips: Using the Selection Tool
- ngs, the transparency, backfaces, and the prevent laser output option are disabled. For the selection we
- Tips: Point spacing for lines
- on of the scanner’s bandwidth. It also results in laser frames with the least number of points. {{:tools
- Tips: Color and path consistency
- The actual object number is indicated on the main Laser Preview panel and also on the [[tools:lc4d:object
- Object Tag: Point Spacing
- Path for this object** controls the path that the laser beam follows, when drawing the selected object. ... e different rules that can be applied to keep the laser path optimized: * **Keep path consistent** Use... ame direction and line traversal order), for each laser frame. In order to create this consistent path, t... ines somewhat to achieve a shorter path, for each laser frame. This tries to minimize the "jumping around
- Object Tag: Line Types
- ect number is shown in the Lasershow Converter 4D Laser Preview panel. As you select different objects, y... ect. This makes the object look like a typical 3D laser frame with no hidden line removal within this obj... ough that object to other objects. * **Prevent Laser Output** calculates the object, but does not actually write any data (points) to the laser frame. This lets the object mask or intersect oth
- Object Tag: Beam Brush
- e that a Beam Brush value of 0 represents nominal laser divergence (typically 1mRad or less), and a Beam ... of 100 represents the maximum divergence that the laser is capable of (typically around 30 milliradians).
- Object Tag: Filter Settings
- if?nolink|}} ===== Gap filter ===== Allows the laser to jump across small gaps in the lines generated for the laser. **Gap distance** is the number of pixels that L... ep the beam on. Increasing this number allows the laser to create longer more-continuous paths from lines... Converter 4D will not generate any points on the laser display if a line is less than 3.0 pixels long. T
- Object Tag: Line Color
- map texture on a cube object. As you can see, the laser output shows the texture. | {{:tools:lc4d:object... iginal cube with texture | Rendered result on the laser | ===== See Also ===== [[tools:lc4d:tip_color_a