Fulltext results:
- Object Tag: Point Spacing
- ====== Object Tag: Point Spacing ====== This panel allows you to control the point placement on an object-by-object basis. Although ... scenes, it is still very useful to specified the point placement settings on an object-by-object basis. {{:tools:lc4d:image-point-spacing.gif?nolink|}} **Note**: The numbers show
- Tips: Point spacing for objects
- ====== Tips: Point spacing for objects ====== Although Lasershow Converter 4D's default((There is no sp... ults for most scenes, it is still handy to assign point placement settings on an object-by-object basis. ... ts ===== In the New York scene below, the arrows point to lines on the buildings that have a fairly shal... . {{:tools:lc4d:psfo1.gif?nolink|}} The default point spacing settings have the **Corner points 165-170
- Tips: Point spacing for lines
- ====== Tips: Point spacing for lines ====== Variable vs. constant point density The default settings for **AutoSpace Distance** (shown below) place a higher point density in areas of the image that have curved lines, and a lower point density in areas of an image that have straight l
- Post-Render Effect: Laser Output, Preview Options and Save Functions
- ponds with frame 2 in BEYOND, etc. ===== Minimum Points ===== This sets the minimum number of laser points rendered in each frame. This could be handy for ke... frame rate consistent. For example, if **Minimum points** was set to 1000 points, you would always get a maximum of 30 frames per second if the sample rate (po
- Post-Render Effect: Laser Output, Preview Options and Save Functions
- ponds with frame 2 in BEYOND, etc. ===== Minimum Points ===== This sets the minimum number of laser points rendered in each frame. This could be handy for kee... frame rate consistent. For example, if **Minimum points** was set to 1000 points, you would always get a maximum of 30 frames per second if the sample rate (po
- Tips: Color and path consistency
- s discussed in the [[tools:lc4d:object_tag_object_point_spacing|Object Point Spacing]] topic, it is highly desirable for the beam path to stay consistent from o... ject, by using the [[tools:lc4d:object_tag_object_point_spacing|Object point spacing]] panel **Beam path for this object** drop-down list. Note that whatever o
- LC4D
- red, animated parameters are indicated with a red point. * [[tools:lc4d:object tag about|About object... r Settings]] * [[tools:lc4d:object tag object point spacing|Object Point Spacing]] * [[tools:lc4d:object tag object soft line|Object Soft Line]] * [... lor and path consistency]] * [[tools:lc4d:tip point spacing for lines|Tips: Point spacing for lines]]
- Tips: Scan speeds and LC4D
- when the ILDA Test Pattern is displayed at 30,000 points per second: | {{:tools:lc4d:sslc4d1.jpeg?nolink... Now, some people may adopt a scan speed of 30,000 points per second. In fact, this is Pangolin's suggesti... ere are two cases: You tune and project at 30,000 points per second, or you prefer other speeds for tunin... n Lasershow Converter MAX. This is usually 30,000 points per second. Lasershow Converter MAX's default s
- Object Tag: Soft Line
- **Soft Line at line beginning** is the number of points over which fading will occur at the beginning of... e. **Soft Line at line ending** is the number of points over which fading will occur at the ending of a ... **Soft Line at round overlaps** is the number of points over which fading will occur at both the beginni... cles. **Soft Line at corners**, is the number of points over which fading will occur at the ending of a
- Object Tag: Line Types
- ou will see this object number updated. The main point to understand is that the object drawn first is t... the object, but does not actually write any data (points) to the laser frame. This lets the object mask o... eeing other objects) and keep them from producing points. ===== See Also ===== * [[tools:lc4d:tip_con
- Questions and answers
- I be worried about the laser image having so many points it flickers? ===== Flicker should not be a sign... bjects, Lasershow Converter 4D may render lots of points. But in all of the scenes that Pangolin has seen... mselves out so that there really aren't that many points. ===== Can I undo my work? ===== Yes! The **Un
- Tips: Beam path optimization
- ct** (found in the [[tools:lc4d:object_tag_object_point_spacing|Object point spacing panel]]) controls how the beam travels. ===== Controlling the beam path wi
- What's new
- s. The additional information shows the number of points in the frame, as well as the Z-axis coordinates ... in, we have removed support for LD2000. From this point forward, Lasershow Converter 4D will only work wi
- Lasershow Converter 4D Renderer
- d. {{:tools:lc4d:step4-3.gif?nolink|}} At this point, you should be able to move the Time Slider back
- Object Tag: Filter Settings
- 3.0, Lasershow Converter 4D will not generate any points on the laser display if a line is less than 3.0