Fulltext results:
- TC4000 Setup and Functionality
- = ===== Introduction ===== The TC4000 is a SMPTE Timecode converter, It converts analog timecode SMPTE to Midi Timecode (MTC) via USB. This allows for connection as a midi device, allowing for sim... ers out of the box. Beyond can receive incoming timecode in the following ways: - MIDI -MMC (Output
- TC4000 Setup and Functionality
- = ===== Introduction ===== The TC4000 is a SMPTE Timecode converter, It converts analog timecode SMPTE to Midi Timecode (MTC) via USB. This allows for connection as a midi device, allowing for sim... ers out of the box. Beyond can receive incoming timecode in the following ways: - MIDI -MMC (Output
- Beam Analyzer (LBA-C-100)
- } __**The sensor should remain below 75°C at any time.**__ Create a beam pattern, with around 1000 poi... his will calculate chromatic compensation in real time. You can now read the divergence measured on th... above 50%, you can measure all colors at the same time. Otherwise, the color with too low or too high “M... ct because the laser beam is not “On” 100% of the time. | Try adjusting the Image Stabilizer, or set a h