Fulltext results:
- TC4000 Setup and Functionality
- r 1 second of timecode signal timeout. **“Enable time smooth filter”** - BEYOND can use the time (from timecode) directly. The time value coming from the Timecode Controller will be used over and ove... ND detecting the timecode speed and following the time code as close as possible. In this situation, BEY
- TC4000 Setup and Functionality
- r 1 second of timecode signal timeout. **“Enable time smooth filter”** - BEYOND can use the time (from timecode) directly. The time value coming from the Timecode Controller will be used over and ove... ND detecting the timecode speed and following the time code as close as possible. In this situation, BEY
- Beam Analyzer (LBA-C-100)
- } __**The sensor should remain below 75°C at any time.**__ Create a beam pattern, with around 1000 poi... his will calculate chromatic compensation in real time. You can now read the divergence measured on th... above 50%, you can measure all colors at the same time. Otherwise, the color with too low or too high “M... ct because the laser beam is not “On” 100% of the time. | Try adjusting the Image Stabilizer, or set a h