Fulltext results:
- TC4000 Setup and Functionality @accessories
- r 1 second of timecode signal timeout. **“Enable time smooth filter”** - BEYOND can use the time (from timecode) directly. The time value coming from the Timecode Controller will be used over and ove... ND detecting the timecode speed and following the time code as close as possible. In this situation, BEY
- MOBOLASER®: A Cross-Platform Companion App for Laser Show Software @mobolaser
- | Adjust and manipulate laser effects in real-time. [[mobolaser:manual#live_controls|More]]| | [[mob... x | Synchronize laser shows with external time code sources. [[mobolaser:manual#timecode_display... is a Blackout button. Pressing this button at any time will immediately cease all laser output. =====... , Sensors, Lock Screen settings, FB4 Controllers, Time Code synchronization, Geometric Correction tools,
- PangoBeats Documentation @pangobeat
- to enhance the audio experience by providing real-time Beats Per Minute (BPM) detection. It seamlessly i... to enrich your audio-visual projects: * **Real-Time BPM Detection**: The core functionality of PangoB... ct the BPM from any selected audio source in real time. * **Integration with BEYOND/QuickShow**: After... **: Users can view the raw audio waveform in real time, providing immediate visual feedback of the audio
- Beam Analyzer (LBA-C-100) @accessories
- } __**The sensor should remain below 75°C at any time.**__ Create a beam pattern, with around 1000 poi... his will calculate chromatic compensation in real time. You can now read the divergence measured on th... above 50%, you can measure all colors at the same time. Otherwise, the color with too low or too high “M... ct because the laser beam is not “On” 100% of the time. | Try adjusting the Image Stabilizer, or set a h
- Lasershow Converter Blender @tools:lcblender
- r is being updated constantly, so at any point in time the newest version of Blender may not be compatib... er animation to the selected cue in BEYOND, every time rendering is completed. (This can be annoying if ... r when identifying overlapping lines. Most of the time, this should be set to between 20 and 45 degrees.
- Download Center
- loads.pangolin.com/_Files/Setup_TC2000.exe|TC2000 Time Encoder]] ===== LiveQUICK ===== * [[https://d