Complete Help Docs

Laser Show Technology for Lighting Professionals

User Tools

Site Tools


tools:lcmax:filter_settings

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

tools:lcmax:filter_settings [2021/05/02 22:31]
Bob Varkevisser created
tools:lcmax:filter_settings [2021/05/02 22:31] (current)
Bob Varkevisser [What do the numbers mean?]
Line 25: Line 25:
 The numeric value of the filter settings represents pixels in the frame window (the one that appears each time you render a frame or animation). A value of 1.5 means 1.5 pixels. The numeric value of the filter settings represents pixels in the frame window (the one that appears each time you render a frame or animation). A value of 1.5 means 1.5 pixels.
  
-If the frame window Output Size is set to 320-by-320 or 320-by-240, then each pixel represents approximately one laser beam diameter. Therefore if the gap filter is set for 1.5, Lasershow Converter MAX will jump a 1.5 beam-diameter gap to try to keep the beam on.+If the frame window **Output Size** is set to 320-by-320 or 320-by-240, then each pixel represents approximately one laser beam diameter. Therefore if the gap filter is set for 1.5, Lasershow Converter MAX will jump a 1.5 beam-diameter gap to try to keep the beam on.
  
 ===== See Also ===== ===== See Also =====
tools/lcmax/filter_settings.1619987483.txt · Last modified: 2021/05/02 22:31 by Bob Varkevisser