Differences

This shows you the differences between two versions of the page.

--- beyond:package-sender [2020/02/26 16:05] – Bob Varkevisser
+++ beyond:package-sender [2020/06/11 19:20] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
 ====== Send packages to BEYOND ======
-BEYOND accepts incoming TCP and/or UDP signals on the "Talk Client service". By enabling this service, you can send custom PangoScript commands to BEYOND. The sender of the package can be any application that is capable to send TCP/UDP commands.
+BEYOND accepts incoming TCP and/or UDP signals on the "Talk Client service". By enabling this service, BEYOND will accept custom PangoScript commands. The sender of the package can be any application that is capable to send TCP and or UDP commands.
 The advantage of this is that that this allows you to control BEYOND over ethernet.
-This configuration uses the free utility [[https://packetsender.com|package sender]], but this could even be your own coded program.
+The example configuration shown below uses the free utility [[https://packetsender.com|package sender]] to send commands to BEYOND. This could even be your own application.
 ===== Enabling Talk server and client =====