Fulltext results:
- Latest Features
- pport for FB4XE**, From Build 5.2 1718, The FB4XE controller is supported. * **Support for FB4SE**, From Build 5.2 1736, FB4SE controller with serial higher than 50000 are supported. *... appear on the status bar. Just right-click on the controller/projector on the status bar and you will be able
- DMX Settings
- r that, specify the COM port where the DMX-to-USB controller is connected. QuickShow gives you the ability to... Currently QuickShow supports only the DMX USB PRO controller from the company ENTTEC. This is a very popular d
- Toolbar
- |}} In order to enable output from the FB3 laser controller, the Enable Laser Output button must be pressed.
- Networking for Lasershows, QuickShow, and Entertainment
- er. Over the next couple milliseconds every laser controller in the rig receives their frame, and waits for th
- Status bar color scheme of FB4
- |White|FB4 connected and operating normally| |Red|controller disconnected| |Yellow|TV mode is ON. TV mode is f
- Toolbar overview
- |}} In order to enable output from the FB3 laser controller, the **Enable Laser Output** button must be press
- Enable Laser Output button
- === In order to enable output from the FB3 laser controller, the Enable Laser Output button must be pressed.