Fulltext results:
- Object Tag: Line Types
- ====== Object Tag: Line Types ====== This allows you to set the [[tools:lc4d:render_line_types|line types]] on an object-by-object basis. {{:tools:lc4d:objecttaglinetypes-1.gif|}} The [[tools:lc4d:tip_using_the_selection_too... == To assign line types, first allocate the LC4D object tag to the specified object that you want to modi
- Object Tag: About object settings
- ====== Object Tag: About object settings ====== The Lasershow Converter 4D object tag allow you to specify settings on an object-by-object basis. You will need to do this if each object r
- Tips: Color and path consistency
- ency ====== As was discussed in the [[tools:lc4d:object_tag_object_point_spacing|Object Point Spacing]] topic, it is highly desirable for the beam path to stay consistent f... s are drawn -- in other words, the beam path from object to object. If on the first frame, object A was d
- LC4D
- of two plug-ins for Cinema 4D: A Renderer and an Object Tag. Each plug-in is explained below: ===== Tuto... ws smooth out the beam path derived from a coarse object. * [[tools:lc4d:render Laser Output|Laser Outp... to this help file. ===== Lasershow Converter 4D Object Tag ===== The object tag plug-in lets you adjust aspects of how Cinema 4D objects will be drawn by the r
- Object Tag: Point Spacing
- ====== Object Tag: Point Spacing ====== This panel allows you to control the point placement on an object-by-object basis. Although the default((There is no special "Reset" function in Lasershow Converter 4D for... ndo** function.\\ \\ If you make changes in the **Object Tag** and you find the results unsatisfactory, si
- Post-Render Effect: Line Types
- Creates a line that surrounds the boundary of the object, from the current viewpoint. | {{:tools:lc4d:pos... ostrenderline-3.gif?nolink|}} | | Original shaded object | **Silhouette** | ===== Silhouette + Folds ====... ostrenderline-6.gif?nolink|}} | | Original shaded object | **Silhouette** | **Silhouette + Folds** | ====... its surface, but how the sphere does not. If the object has creases that are clearly visible in Cinema 4D
- Tips: Using the Selection Tool
- ine Types** section of the Lasershow Converter 4D object tag allows to apply specific line and color settings only to selected faces or folds of an object. These selections appear with an own selection tag in the Cinema 4D object manager. In contrast to the [[tools:lc4d:tip_use... ge Selection]] option, the Lasershow Converter 4D object tag will be assigned to a selection tag in the ob
- Contour axis
- ====== Contour axis ====== With the [[tools:lc4d:object_tag_line_types|Object line types]] panel, you can assign which axis you want the contours to run over. You can choose the object’s X, Y or Z axis, or the view (camera's) X, Y or ... ndo** function.\\ \\ If you make changes in the **Object Tag** and you find the results unsatisfactory, si
- Object Tag: Line Color
- ====== Object Tag: Line Color ====== This panel allows you to control the colors generated on an object-by-object basis. \\ **Note**: The control of intersecting lines color is done within the [[tools:lc4d:object_tag_line_types|Object Line Type]] section. {{:to
- Object Tag: Soft Line
- ====== Object Tag: Soft Line ====== This panel allows you to control the Soft Line Endings (faded beginnings and endings of lines), on an object-by-object basis. Although the default((There is no special "Reset" function in Lasershow Converter 4D for... ndo** function.\\ \\ If you make changes in the **Object Tag** and you find the results unsatisfactory, si
- Tips: Point spacing for objects
- ndo** function.\\ \\ If you make changes in the **Object Tag** and you find the results unsatisfactory, simply delete the Object Tag from the **object manager** list and apply a new Object Tag. The tag can be removed by clicking on the tag icon and press t
- Tips: Using Edge Selection
- |Selection]] option of the Lasershow Converter 4D object tag. The picture below shows a Cinema 4D viewpor... ckly create a geometric, or high-tech look of the object. But in addition to simple geometric looks, you c... se you always wanted to show certain lines on the object in order to illustrate a particular feature that ... ine certain edges of the mesh as an own selection object to be able to apply the C4D object tag on it. The
- Tips: Beam path optimization
- objects, the drop-down list **Beam path for this object** (found in the [[tools:lc4d:object_tag_object_point_spacing|Object point spacing panel]]) controls how the beam travels. ===== Controlling the beam pa
- Post-Render Effect: Line Color
- ===== Post-Render Effect: Line Color ====== Each object in Cinema 4D will have a material assigned to it.... reflectivity, and other visible attributes of the object when it is rendered. Among the settings of the material are the Object and Specular color of the material as well as Tex... r 4D gives you the option of using the material’s Object color or Specular color. In addition, you can sel
- Object Tag: Beam Brush
- ====== Object Tag: Beam Brush ====== This panel allows you to control the Beam Brush (dynamic divergence)... y Z-based brightness depth cueing of lines, on an object-by-object basis. {{:tools:lc4d:image-beambrush1.png?nolink|}} Beam Brush is dynamic beam divergence tec... beam diameter found in the 3ds Max objects. Each object can have its own Beam Brush settings, providing t