This is an old revision of the document!
Table of Contents
PangoScript Commands
A-B-C
| Function | Code | Comments |
|---|---|---|
| AddSms | AddSMS “This is my demo message” | |
| Angle | Angle 0,0,0 | X,Y,Z angles in degrees |
| AngleDelta | AngleDelta 0,0,0 | increment X,Y,Z angles in degrees |
| AngleX | AngleX 0 | degree |
| AngleY | AngleY 0 | degree |
| AngleZ | AngleZ 0 | degree |
| AnimateProp | AnimateProp “”, 0,1,1000 | “variable”, From, To, Duration MS |
| AnimatePropDelta | AnimatePropDelta “”, 10,1000 | “variable”, Delta, Duration MS |
| AnimationSpeed | AnimationSpeed 100 | speed in %. Zero full stop. |
| AnimationSpeedDelta | AnimationSpeedDelta 0 | |
| AudioBeat | AudioBeat | |
| Autostart | AutoStart | |
| BeatResync | BeatResync | |
| BeatTap | BeatTap | |
| BlackOut | BlackOut | |
| Brightness | Brightness 100 | 0..100 (percents) |
| BrightnessDelta | BrightnessDelta 0 | |
| CaptureToClipboard | CaptureToClipboard | |
| ChannelOut | ChannelOut 1, 1000 | set first channel to 1000 (max value) |
| ClickFXStopAll | ||
| ClickFXTabMode | ClickFXTabMode 1 | 1-Master, 2-Cue, 3-Zone, 4-ProTrack |
| ClickFlash | ClickFlash | optional argument: 1 or 2 (Grid number) |
| ClickFxVlj | ClickFxVlj 1 | Toggle first FX-VLJ |
| ClickLCTabMode | ClickLCTabMode 1 | 1-Master, 2-Cue, 3-Zone, 4-ProTrack |
| ClickLive | ClickLive | optional argument: 1 or 2 (Grid number) |
| ClickLockSize | ClickLockSize 1 | 0,1,2 Off, On, toggle |
| ClickRestart | ClickRestart | optional argument: 1 or 2 (Grid number) |
| ClickScrollA | ClickScrollA -5 | scroll speed, recommended -5..-1, or 1..5. Zero will stop. |
| ClickScrollAniSpeed | ClickScrollAniSpeed -5 | scroll speed, recommended -5..-1, or 1..5. Zero will stop. |
| ClickScrollB | ClickScrollB -5 | scroll speed, recommended -5..-1, or 1..5. Zero will stop. |
| ClickScrollColor | ClickScrollColor -5 | scroll speed, recommended -5..-1, or 1..5. Zero will stop. |
| ClickScrollFade | ClickScrollFade -5 | scroll speed, recommended -5..-1, or 1..5. Zero will stop. |
| ClickScrollG | ClickScrollG -5 | scroll speed, recommended -5..-1, or 1..5. Zero will stop. |
| ClickScrollHue | ClickScrollHue -5 | scroll speed, recommended -5..-1, or 1..5. Zero will stop. |
| ClickScrollHueShift | ClickScrollHueShift -5 | scroll speed, recommended -5..-1, or 1..5. Zero will stop. |
| ClickScrollR | ClickScrollR -5 | scroll speed, recommended -5..-1, or 1..5. Zero will stop. |
| ClickScrollSaturation | ClickScrollSaturation -5 | scroll speed, recommended -5..-1, or 1..5. Zero will stop. |
| ClickScrollScanRate | ClickScrollScanRate -5 | scroll speed, recommended -5..-1, or 1..5. Zero will stop. |
| ClickScrollSize | ClickScrollSize -5 | scroll speed, recommended -5..-1, or 1..5. Zero will stop. |
| ClickScrollVPoints | ClickScrollVPoints -5 | scroll speed, recommended -5..-1, or 1..5. Zero will stop. |
| ClickScrollZoom | ClickScrollZoom -5 | scroll speed, recommended -5..-1, or 1..5. Zero will stop. |
| ClickSelect | ClickSelect | optional argument: 1 or 2 (Grid number) |
| ClickSoloFlash | ClickSoloFlash | optional argument: 1 or 2 (Grid number) |
| ClickTCTabMode | ClickTCTabMode 1 | 1-Master, 2-Cue, 3-Zone, 4-ProTrack |
| ClickToggle | ClickToggle | optional argument: 1 or 2 (Grid number) |
| ClickTrack | ClickTrack | optional argument: 1 or 2 (Grid number) |
| CloseUmax | CloseUmax | |
| CodeColorMarker | CodeColorMarker 0x00FF00 | green color marker |
| CodeName | CodeName “MyCode” | define name of |
| CodeShortcut | CodeShortcut “Ctrl+D” | |
| ColorBGR | ColorBGR 0x0000FF | blue color |
| ColorOn | ColorOn 1 | 1-enabled, 0-disabled |
| ColorRGB | ColorRGB 0x0000FF | red color, |
| ColorSlider | ColorSlider 0 | 0..255 |
| ColorSliderDelta | ColorSliderDelta 0 | |
| ControlCue | ControlCue 1,1 | |
| ControlFromFxTab | ControlFromFxTab | |
| ControlFromLcTab | ControlFromLcTab | |
| ControlFromTcTab | ControlFromTcTab | |
| ControlFromUI | ControlFromUI | |
| ControlMaster | ControlMaster | |
| ControlProTrack | ControlProTrack 1 | |
| ControlProjector | ControlProjector 1 | |
| ControlSelCues | ControlSelCues | |
| ControlSelProTracks | ControlSelProTracks | |
| ControlSelZones | ControlSelZones | |
| ControlZone | ControlZone 1 | name as “Main Graphics”, or zone number 1…N |
| CueDown | Cuedown 1,1 | page 1..100, cue 1..100 |
| CueUp | CueUp 1,1 | page 1..100, cue 1..100 |
D-E-F
| Function | Code | Comments |
|---|---|---|
| DecreaseTrigger | DecreaseTrigger 0,100,“MyLabel” | Min Value, Max Value, Label name |
| DefineDmxTrigger | DefineDmxTrigger 1 | Channel |
| DefineMidiTrigger | DefineMidiTrigger 0xC0, 0x00 | MIDI Cmmand, MIDI Data 1, Trigger Name (optional), MIDI Dev index from 0 to 3 (optional), but default - any |
| DefineTcTrigger | DefineTCTrigger “TC Test” | hour, minute, second |
| DefineTrigger | DefineTrigger “2+2” | expression… |
| DeletePropAni | DeletePropAni | “variable”, [“variable”,..] |
| DisableLaserOutput | DisableLaserOutput | |
| DisplayPopup | DisplayPopup “Hello world!” | |
| DisplayPopupOnTop | DisplayPopupOnTop “Hello world!” | |
| DisplayPreview | DisplayPreview “Hello world!”, 0x0000ff | |
| DmxInMute | DmxInMute 1, 255 | Channel index, 0 or 1; or ChannelIndex |
| DmxOut | DmxOut 1, 255 | set first DMX OUT channel to 255 (max value) |
| DmxOutRange | DmxOutRange 1, 255 | set first DMX OUT channel |
| DropFX | DropFX 1,1, 1000 | Layer, Index, duration ms |
| Echo | Echo 2 | 0-none, 1-ok/error, 2-echo of input plus ok/error |
| EnableDmxIn | EnableDmxIn Toggle | ON, OFF, TOGGLE |
| EnableFb3StyleDmxIn | EnableFb3StyleDmxIn 1 | On(1), Off(0), Toggle(2) |
| EnableLaserOutput | EnableLaserOutput | |
| ExecCmd | ExecCmd “Blackout” | |
| Exit | Exit | |
| ExitBEYOND | ExitBEYOND | Exit from BEYOND |
| FX | FX 0,0,0,0 | One or more layers. 0 stop. Effect 1..100 |
| FXAction | FXAction 100,100,100,100 | One or more layers. Set effect action from 0% to 100% |
| FXCellClick | FXCellClick 1,1 | |
| FXCellDown | FXCellDown 1, 1 | Layer number: 1..4, Effect number |
| FXClick | FXClick 1,1 | |
| FXScroll | FXScroll 1 | |
| FXScrollDelta | FXScrollDelta 8 | |
| FXTimeScaleAx | FXTimeScaleAx 1,2,1 | Layer, Mask (1,2,3), multiplier |
| FXTimeScaleAxReset | FXTimeScaleAxReset 1,2 | Layer, Mask (1,2,3) |
| FXTimeScaleDeltaAx | FXTimeScaleDeltaAx 1,2,1 | Layer, Mask (1,2,3), increment value |
| FXTimeSync | FXTimeSync 1,1 | Layer, Source (1-Master, 2-Own time) |
| FocusCell | FocusCell 1,1 | Column (1..10), Row (1..6) |
| FocusCellIndex | FocusCellIndex 1 | cell index, 1..60 |
| FocusProTrack | FocusProTrack 1 | Track index/name |
| FocusProjector | FocusProjector 1 | Projector index, 1..N. |
| FocusZone | FocusZone 1 | zone index, 1..N. |
G-H-I
| Function | Code | Comments |
|---|---|---|
| GetFxControl | GetFxControl | |
| GetLiveControl | GetLiveControl | |
| GetPage | GetPage | |
| GetTimeControl | GetPage | |
| GoGridMode | GoGridMode | |
| GoPlayListMode | GoPlayListMode | |
| GoTimelineMode | GoTimelineMode | |
| GoUniverseMode | GoUniverseMode | |
| GroupCue | GroupCue | |
| Hello | hello | answer will be Hello! |
| HoldClick | HoldClick ON |
| HtmlBody | HtmlBody |
| HtmlClearBody | HtmlClearBody |
| HtmlClearHead | HtmlClearHead |
| HtmlHead | HtmlHead |
| HtmlHide | HtmlHide |
| HtmlUpdate | HtmlUpdate |
| Hue | Hue 0 |
| HueDelta | HueDelta 0 |
| HueShift | HueShift 0 |
| HueShiftDelta | HueShiftDelta 0 |
| InRangeTrigger | InRangeTrigger 0,100,“MyLabel” | Min Value, Max Value, Label name |
| InRangeTriggerCmd | InRangeTriggerCmd 0,100,“Blackout” | Min Value, Max Value, Command |
| IncreaseTrigger | IncreaseTrigger 0,100,“MyLabel” | Min Value, Max Value, Label name |
| InvertPlayersTime | InvertPlayersTime |
| InvertProTrackTime | InvertProTrackTime |
| InvertRotationX | InvertRotationX |
| InvertRotationY | InvertRotationY |
| InvertRotationZ | InvertRotationZ |
| LessThanTrigger | LessThanTrigger 0,“MyLabel” | Value, Label name |
| LinePerCycle | LinePerCycle 24 |
| LoadCue | LoadCue “c:\MyAnimationFile.bani” | Enter correct file name! |
| LoadCueFromBlob | <internal commmand> |
| LoadPlaylist | LoadPlaylist “c:\MyPlaylist.BeyondSL” |
| LoadWorkspace | LoadWorkspace “c:\MyWorkspace.BeyondWorkspace” | Enter correct file name! |
| LoadZoneFromBlob | <internal commmand> |
| MakeSecuredFile | MakeSecuredFile “Input file name”, “Output file name”, ClientHardwareSerial |
| ManualBeat | ManualBeat |
| MasterAudioVolume | MasterAudioVolume 100 | in percents |
| MasterAudioVolumeMute | MasterAudioVolumeMute 1 | On(1), Off(0), Toggle(2) |
| MasterClockShift | MasterClockShift 0 | in seconds |
| MasterCueLcSpeed | MasterCueLcSpeed 100 | in percents |
| MasterCueSpeed | MasterCueSpeed 100 | in percents |
| MasterEffectClockShift | MasterEffectClockShift 0 | in seconds |
| MasterEffectMetroShift | MasterEffectMetroShift 0 | in beats |
| MasterFXSpeed | MasterFXSpeed 100 | in percents |
| MasterLCSpeed | MasterLCSpeed 100 | in percents |
| MasterMetroShift | MasterMetroShift 0 | in beats |
| MasterPause | MasterPause Toggle |ON, OFF, TOGGLE |
| MasterPauseTime | MasterPauseTime 1000 | time in milliseconds |
| MasterShowBrightness | MasterShowBrightness 100 | in percents |
| MasterShowSpeed | MasterShowSpeed 100 | in percents |
| MasterSpeed | MasterSpeed 1 | From zero to one |
| MasterTransition | MasterTransition ON |
| MasterTransitionIndex | MasterTransitionIndex 2 |
| MasterTransitionTime | MasterTransitionTime 0.1 |
| MasterZoneFxSpeed | MasterZoneFxSpeed 100 | in percents |
| MeshCurve | MeshCurve 1,2,3 | quad-spline between point 1,2 and 3 |
| MeshPoint | MeshPoint -100,-100, 0, “LeftBottom” |
| MeshPointChan | MeshPointChan 1,0,0 |
| MeshPolygon | MeshPolygon 1,2 | connect 1st and 2nd point |
| MeshRect | MeshRect 1,2,3,4 |
| MeshSpline | MeshSpline 1,2,3,4 | cubic-spline based on 4 points. 1,4 bases, 2,3 “handles” |
| MeshTriangle | MeshTriangle 1,2,3 |
| MidiOut | MidiOut 0x90, 0x40, 0x7F |
| MidiOutLong | MidiOutLong 0x90, 0x40, 0x7F |
| MidiSysexAdd | MidiSysexAdd “F0477F” | add data to Systex buffer, string must represent sequence of hex values. In addition, you may use integer parameters |
| MidiSysexSend | MidiSysexSend | send prepared sysex buffer |
| MidiSysexStart | MidiSysexStart | clear Sysex buffer |
| MoreThanTrigger | MoreThanTrigger 0,“MyLabel” | Value, Label name |
| MoveFocus | MoveFocus -1,0 | number of cells to go horizontally and vertically |
| MulFXMulAx |
MulFXMulAx 1, 3, 1 | Multiply multiplier… 
Layer number: 1..4, Mask (1 is clock, 2 is beat, 3 is clock and beat), Value of multiplier |
| MultiCue | MultiCue |
| MuteAllProTracks | MuteAllProTracks |
| MuteProTrack | MuteProTrack 1 | index(es) or name(s) |
| MuteSelected | MuteSelected |
| MuteSelectedZones | MuteSelectedZones OFF | ON, OFF, TOGGLE |
| MuteZone | MuteZone 0 | index(es) or name(s) |
| MuteZonesOfProjector | MuteZonesOfProjector 1 | projector index, 1..N. |
| OneCue | OneCue | one cue per workspace |
| OnePer | OnePer | one cue per projectoin zone |
| OscOut | OscOut “/beam1/xy”, -5, 100 | set beam 1 position to [-5,100] |
| OscOutTTS | OscOutTTS “”,“” | Address, Type Tag String, Arguments (optional) |
| OutOfRangeTrigger | OutOfRangeTrigger 0,100,“MyLabel” | Min Value, Max Value, Label name |
| OutOfRangeTriggerCmd | OutOfRangeTriggerCmd 0,100,“Blackout” | Min Value, Max Value, Command |
| Password | password “enter pasword here” |
| PasteToCue | PasteToCue |
| PauseCue | PauseCue 1,1, TOGGLE | page, cue, action (ON, OFF, TOGGLE) |
| PlayListFirst | PlayListFirst |
| PlayListLast | PlayListLast |
| PlayListNext | PlayListNext |
| PlayListPlay | PlayListPlay |
| PlayListPrev | PlayListPrev |
| PlayListSetPos | PlayListSetPos 1 |
| PlayListSetTime | PlayListSetTime 0 |
| PlayListStop | PlayListStop |
| PlayTimeline | PlayTimeline |
| PlayersDisk | PlayersDisk 1, 0.1 |
| PlayersDiskShift | PlayersDiskShift 0.1 |
| PlayersResetJump | PlayersResetJump |
| PlayersSetJump | PlayersSetJump |
| PlayersSetLoop | PlayersSetLoop |
| Position | Position 0,0,0 | X,Y,Z position. |
| PositionDelta | PositionDelta 0,0,0 | X,Y,Z |
| PositionIndex | PositionIndex 1,0 | one axiz only: 1 is X, 2 is Y, 3 is Z. Second paramater is Value, 0 center, 100 is max |
| PositionX | PositionX 0 |-100..100 |
| PositionY | PositionY 0 |-100..100 |
| PositionZ | PositionZ 0 |-100..100 |
| PreviewMaster | PreviewMaster |
| PreviewNxN | PreviewNxN 1 | 1 - laser, 2 - 2×2, 3 - 3×3, 4 - 4×4 |
| ProTrackDisk | ProTrackDisk 1, 0.1 |
| ProTrackDiskShift | ProTrackDiskShift 0.1 |
| ProTrackResetJump | ProTrackResetJump |
| ProTrackSetJump | ProTrackSetJump |
| ProTrackSetLoop | ProTrackSetLoop |
| ProjectionZonesDialog | ProjectionZonesDialog |
| PulseEvent | PulseEvent “MyEventName” |
| QLog | QLog “My message to QLog tab” |
| RGBA | RGBA 255,255,255,255 | R,G,B,Alpha. 0..255 |
| RGBADelta | RGBADelta 0,0,0,0 |
| ReStartCell | RestartCell | restart current cell |
| ReStoreZoneSelection | ReStoreZoneSelection |
| RebootConnectedFB4 | RebootConnectedFB4 | If you need to use this command then please contact Pangolin (report@pangolin.com) and tell what is wrong with your FB4. Thanks. |
| RefreshDmxIn | RefreshDmxIn | activate update of DMX IN reactions, independently on data changed or no |
| RegisterOscFeedback | RegisterOscFeedback “/beyond/master/brightness”, “master.brightness” |
| ResetCuesFX | ResetCuesFX |
| ResetFxTiming | ResetFxTiming |
| ResetLCTab | ResetLCTab |
| ResetLiveControl | ResetLiveControl |
| ResetMasterFX | ResetMasterFX |
| ResetMidiFeedback | ResetMidiFeedback |
| ResetOscFeedback | ResetOscFeedback |
| ResetPosition | ResetPosition |
| ResetProTrackFX | ResetProTrackFX |
| ResetRotation | ResetRotation |
| ResetRotationX | ResetRotationX |
| ResetRotationY | ResetRotationY |
| ResetRotationZ | ResetRotationZ |
| ResetZonesFX | ResetZonesFX |
| Restart | Restart |
| RestartCue | RestartCue 1,1 | page, cue |
| RestorePlayer | RestorePlayer |
| ResyncByCueClick | ResyncByCueClick On | options: On, Off, Toggle |
| RotoSpeed | RotoSpeed 0,0,0 | rotation speed by X,Y,Z axis. degree. |
| RotoSpeedDelta | RotoSpeedDelta 0,0,0 | increment of rotation speed. X,Y,Z axis. |
| RotoSpeedX | RotoSpeedX 0 | rotation speed, degree |
| RotoSpeedY | RotoSpeedY 0 | rotation speed, degree |
| RotoSpeedZ | RotoSpeedZ 0 | rotation speed, degree |
| RunApp | RunApp “C:\Windows\Notepad.exe”, “” | full exe file name, parameters |
| Saturation | Saturation 0 |
| SaturationDelta | SaturationDelta 0 |
| ScanRate | ScanRate 100 |
| ScanRateDelta | ScanRateDelta 0 |
| SelectAllCat | SelectAllCat |
| SelectAndFocusZone | SelectAndFocusZone 1 | zone index, 1..N. |
| SelectCat | SelectCat 1 | category index, 1..N. |
| SelectCatName | SelectCatName “Graphics” | define correct Category name. |
| SelectCue | SelectCue “Cue01” | Enter correct Cue name! |
| SelectFixt | SelectFixt 0 | index(es) or name(s) |
| SelectGrid | SelectGrid 1 | 1-main grid, 2-grid at bottom. 0-recently active |
| SelectMidi | SelectMidi 1 | select MIDI device pair, 1..4. |
| SelectNextCat | SelectNextCat |
| SelectNextCatGrid1 | SelectNextCatGrid1 |
| SelectNextPage | SelectNextPage |
| SelectNextPageGrid1 | SelectNextPageGrid1 |
| SelectNextTab | SelectNextTab |
| SelectNextTabGrid1 | SelectNextTabGrid1 |
| SelectPage | SelectPage 1 | tab index, 1..N. |
| SelectPageName | SelectPageName “Graphics” | define Page name! |
| SelectPrevCat | SelectPrevCat |
| SelectPrevCatGrid1 | SelectPrevCatGrid1 |
| SelectPrevPage | SelectPrevPage |
| SelectPrevPageGrid1 | SelectPrevPageGrid1 |
| SelectPrevTab | SelectPrevTab |
| SelectPrevTabGrid1 | SelectPrevTabGrid1 |
| SelectProTrack | SelectProTrack 1 | index(es) (1..N) or name(string). Can be used more than one argument |
| SelectProjector | SelectProjector 1 | index(es) (1..N) or name(string). Can be used more than one argument |
| SelectTab | SelectTab 1 | tab index, 1..N. |
| SelectTabName | SelectTabName “Graphics” | define Page name! |
| SelectZone | SelectZone 1 | zone index, 1..N. |
| SelectZoneName | SelectZoneName “Main Graphics” | enter Zone name |
| SetActiveGrid | SetActiveGrid 1 | or 2 |
| SetAttractionSlider | SetAttractionSlider 10 |
| SetAudioGain | SetAudioGain 10 | 1..15 |
| SetAudioInGain | SetAudioInGain 10 | 1 is min, 15 is max, 10 default |
| SetAudioInRelease | SetAudioInRelease 75 | 1 is min, 99 is max (slowest) 75 is default |
| SetAudioRelease | SetAudioRelease 75 | 1..99 |
| SetBpm | SetBpm 120 |
| SetBpmDelta | SetBpmDelta 1 |
| SetButtonMSL | SetButtonMSL 1 |
| SetChannelToChannelRatio | SetChannelToChannelRatio 0 | 0..100 |
| SetCueCaptionColor | SetCueCaptionColor 1,2, 0x0000FF | page 1, cue 2, color (windows, 24bit color) |
| SetDmxEditorChannel | SetDmxEditorChannel 1, 128 |
| SetDmxToChannelRatio | SetDmxToChannelRatio 0 | 0..100 |
| SetEffectChannelAction | SetEffectChannelAction 0 |0..100 |
| SetFFTToChannelRatio | SetFFTToChannelRatio 0 | 0..100 |
| SetFX | SetFX 1, 1 | Layer number: 1..4, Effect index: 1..100 |
| SetFX1MSL | SetFX1MSL 1 |
| SetFX2MSL | SetFX2MSL 1 |
| SetFX3MSL | SetFX3MSL 1 |
| SetFX4MSL | SetFX4MSL 1 |
| SetFX5MSL | SetFX5MSL 1 |
| SetFX6MSL | SetFX6MSL 1 |
| SetFXAction | SetFXAction 1, 100 | Layer number: 1..4, Action 0..100 percent |
| SetFXAction1 | SetFXAction1 100 | Action 0..100 percent |
| SetFXAction2 | SetFXAction2 100 | Action 0..100 percent |
| SetFXAction3 | SetFXAction3 100 | Action 0..100 percent |
| SetFXAction4 | SetFXAction4 100 | Action 0..100 percent |
| SetFXAction5 | SetFXAction5 100 | Action 0..100 percent |
| SetFXAction6 | SetFXAction6 100 | Action 0..100 percent |
| SetFXAction7 | SetFXAction7 100 | Action 0..100 percent |
| SetFXAction8 | SetFXAction8 100 | Action 0..100 percent |
| SetFXMul | SetFXMul 1, 1,1 | Layer number: 1..4, Multiplier 1 - default value for clock and metronome |
| SetFXMulAx | SetFXMulAx 1, 3, 1 | Layer number: 1..4, Mask (1 is clock, 2 is beat, 3 is clock and beat), Value of multiplier |
| SetFXMute | SetFXMute 1, 0 | Layer number: 1..4, 0-Off, 1-On, 2-Toggle |
| SetFrictionSlider | SetFrictionSlider 10 |
| SetGrid1MSL | SetGrid1MSL 1 |
| SetGrid1Page | SetGrid1Page 1 |
| SetGrid2MSL | SetGrid2MSL 1 |
| SetGrid2Page | SetGrid2Page 1 |
| SetGridSize | SetGridSize 8,5 |
| SetGridView | SetGridView |
| SetLimiterBeam | SetLimiterBeam 5 |
| SetLimiterDMX | SetLimiterDMX 5 |
| SetLimiterFlash | SetLimiterFlash 4 |
| SetLimiterHold | SetLimiterHold 3 |
| SetLimiterPerGrid | SetLimiterPerGrid 10 |
| SetLimiterPerZone | SetLimiterPerZone 3 |
| SetLimiterProfile | SetLimiterProfile 1 |
| SetLimiterShow | SetLimiterShow 2 |
| SetLocation | SetLocation 1, 0,0,0 | set one of 256 positions/locations (index 1..256, X,Y,Z as normalized values (0..1) |
| SetMassSlider | SetMassSlider 4 |
| SetMidiLayer | SetMidiLayer 1 | 1..8. |
| SetPage | SetPage 1 |
| SetPhysicsCheckbox | SetPhysicsCheckbox ON |
| SetPlayListView | SetPlayListView |
| SetProTrackZones | SetProTrackZones 1, 1 | Track index/name, Zone name(es)/index(es) |
| SetSliderMSL | SetSliderMSL 1 |
| SetTimelineView | SetTimelineView |
| SetTransitionIndex | SetTransitionIndex 2 |
| SetTransitionTime | SetTransitionTime 0.1 |
| SetUCenterPage | SetUCenterPage 1 | set first page |
| SetUEditPage | SetUEditPage 1 | set first page |
| SetUMaxPage | SetUMaxPage 1 | set first page |
| SetUPreviewPage | SetUPreviewPage 1 | set first page |
| SetURightPage | SetURightPage 1 | set first page |
| SetUToolPage | SetUToolPage 1 | set first page |
| SetUniverseView | SetUniverseView |
| SetVdjToChannelRatio | SetVdjToChannelRatio 0 | 0..100 |
| SetWorkspacePageCount | <internal commmand> |
| SetZoneMeshPointPos | SetZoneMeshPointPos 1, 1,1, 0,0 | Zone index, X node index, Y node index, X coordinate (-32K..32K), y coordinate |
| SetZoneMuteMSL | SetZoneMuteMSL 1 |
| SetZoneSelMSL | SetZoneSelMSL 1 |
| ShiftFX | ShiftFX 1, 1 | Layer 1..4, delta |
| ShiftFocus | ShiftFocus -5 | go back and forth on N cells |
| ShowHint | ShowHint “Hello!” | show hint window in center of main window |
| ShowItNowSMS | ShowIsNowSMS 1 |
| ShowMasterHelpFile | ShowMasterHelpFile |
| ShutDownWindows | ShutDownWindows | require ShutDownWindows.exe application |
| Size | Size 100,100,100 | Size X,Y,Z axis |
| SizeDelta | SizeDelta 0,0,0 | shift Size value |
| SizeIndex | SizeDelta 0,0 |
| SizeX | SizeX 100 |
| SizeY | SizeY 100 |
| SizeZ | SizeZ 100 |
| Sleep | Sleep 1000 |
| SoloProTrack | SoloProTrack 1 | index(es) or name(s) |
| StartAudioRecord | StartAudioRecord |
| StartCell | StartCell | start current cell |
| StartCode | StartCode “MyCode” | put YOUR name of code |
| StartCue | StartCue 1,1 |
| StartPrevious | StartPrevious | “Back” button |
| StartTalkClient | StartUdpTalkClient |
| StartTalkServer | StartUdpTalkServer |
| StopAllAsync | StopAllAsync 0.5 | duration in seconds |
| StopAllNow | StopAllNow | no arguments |
| StopAllSync | StopAllSync 0.5 | duration in seconds |
| StopAudioRecord | StopAudioRecord |
| StopCell | StopCell | stop current cell |
| StopCode | StopCode “MyCode” | put YOUR name of code |
| StopCue | StopCue 1,1 |
| StopCueNow | StopCueNow 1, 1 | page 1..100, cue 1..100 |
| StopCueSync | StopCueSync 1, 1, 0.5 | page 1..100, cue 1..60, time 0.. |
| StopCueType | StopCueType 255 |Mask: 1-Image, 2-Timeline, 4-DMX, 8-Sequence, 16-Beams, 32-Capture |
| StopFX | StopFX | One or more layers. 0 stop. Effect 1..100 |
| StopFxCell | StopFXCell | Layer index, optional Cell index (relative, take into account scrollbar) |
| StopOnBlackout | StopOnBlackout 1 |
| StopProTrack | StopProTrack 1 | index(es) (1..N) or name(string). Can be used more than one argument |
| StopProTrackFX | StopProTrackFX 1, 1 | Track index/name and FX line index(es). Counting from 1. If no arguments at all - stop all FX on all tracks |
| StopTalkClient | StopUdpTalkClient |
| StopTalkServer | StopUdpTalkServer |
| StopTimeline | StopTimeline |
| StoreZoneSelection | StoreZoneSelection |
| StrobeSpeed | StrobeSpeed 0.2 | period, flicker per second |
| StrobeSpeedDelta | StrobeSpeedDelta 0.1 | period, flicker per second |
| SynchronizePlayerToBeat | SynchronizePlayerToBeat On | options: On, Off, Toggle |
| TapByCueClick | TapByCueClick On | options: On,Off, Toggle |
| TimelineAddMarker | TimelineAddMarker |
| TimelineEnableTC | TimelineEnableTC |
| TimelineFirstTab | TimelineFirstTab |
| TimelineJumpDelta | TimelineJumpDelta 1 | one second |
| TimelineJumpToEnd | TimelineJumpToEnd |
| TimelineJumpToStart | TimelineJumpToStart |
| TimelineLastTab | TimelineLastTab |
| TimelineMarker | TimelineMarker |
| TimelineNextEditPoint | TimelineNextEditPoint |
| TimelineNextMarker | TimelineNextMarker |
| TimelineNextTab | TimelineNextTab |
| TimelinePlay | TimelinePlay |
| TimelinePlayFromMarker | TimelinePlayFromMarker “” |
| TimelinePrevEditPoint | TimelinePrevEditPoint |
| TimelinePrevMarker | TimelinePrevMarker |
| TimelinePrevTab | TimelinePrevTab |
| TimelineQuickSave | TimelineQuickSave |
| TimelineSetPos | TimelineSetPos 10 | jump to second 10 |
| TimelineSetTabIndex | TimelineSetTabIndex |
| TimelineSetTabName | TimelineSetTabName “MyShow” |
| TimelineSetViewRange | TimelineSetViewRange 1,5 | from s to 5 second |
| TimelineShiftViewRange | TimelineShiftViewRange 1 | one second shift |
| TimelineShowItNow | TimelineShowItNow 1 | set online mode for timeline editor |
| TimelineStop | TimelineStop |
| TimerBeat | TimerBeat |
| ToggleCell | Toggle | start/stop current cell |
| ToggleCue | ToggleCue 1,1 |
| ToggleFX | ToggleFX 1 | Layer number: 1..4 |
| ToggleMuteProTrack | ToggleMuteProTrack 1 | index(es) or name(s) |
| ToggleMuteZone | ToggleMuteZone 0 | index(es) or name(s) |
| ToggleMuteZoneOfProjector | ToggleMuteZoneOfProjector 1 | 1st projector |
| TogglePrevious | TogglePrevious | “SWAP” button |
| ToggleSelectFixt | ToggleSelectFixt |
| ToggleSelectProTrack | ToggleSelectProTrack 1 | index(es) (1..N) or name(s) |
| ToggleSelectProjector | ToggleSelectProjector 1 | index(es) (1..N) or name(s) |
| ToggleSelectZone | ToggleSelectZone 1 | zone index, 1..N. |
| ToggleSoloProTrack | ToggleSoloProTrack 1 | index(es) or name(s) |
| ToggleUCenterPage | ToggleUCenterPage 1 | Relative command. +1 means next page, -1 means previous |
| ToggleUEditPage | ToggleUEditPage 1 | Relative command. +1 means next page, -1 means previous |
| ToggleUMaxPage | ToggleUMaxPage 1 | Relative command. +1 means next page, -1 means previous |
| ToggleUPreviewPage | ToggleUPreviewPage 1 | Relative command. +1 means next page, -1 means previous |
| ToggleURightPage | ToggleURightPage 1 | Relative command. +1 means next page, -1 means previous |
| ToggleUToolPage | ToggleUToolPage 1 | Relative command. +1 means next page, -1 means previous |
| Transition | Transition Toggle | ON, OFF, TOGGLE |
| UnMuteZonesOfProjector | UnMuteZonesOfProjector 1 | projector index, 1..N. |
| UnSelectZone | UnSelectZone 1 | zone index, 1..N. |
| UnSelectZoneName | UnSelectZoneName “Main Graphics” | enter Zone name |
| UnSoloAllProTrack | UnSoloAllProTrack |
| UnSoloProTrack | UnSoloProTrack 1 | index(es) or name(s) |
| UnmuteAllProTracks | UnmuteAllProTracks |
| UnmuteAllZone | UnmuteAllZone |
| UnmuteProTrack | UnmuteProTrack 1 | index(es) or name(s) |
| UnmuteZone | UnmuteZone 0 | index(es) or name(s) |
| UnselectAllCue | UnselectAllCue |
| UnselectAllFixt | UnselectAllFixt |
| UnselectAllProTracks | UnselectAllProTracks |
| UnselectAllProjectors | UnselectAllProjectors |
| UnselectAllZones | UnselectAllZones |
| UnselectFixt | UnselectFixt 0 | index(es) or name(s) |
| UnselectProTrack | UnselectProTrack 1 | index(es) (1..N) or name(s) |
| UnselectProjector | UnselectProjector 1 | index(es) (1..N) or name(s) |
| VLJFX | VljFX 1, Toggle | index of FX-VLJ 1..4, and action: ON, OFF, TOGGLE |
| Version | version | remote server will get exe file version |
| VirtualLJ | VirtualLJ Toggle | ON, OFF, TOGGLE |
| VisiblePoints | VisiblePoints 100 | 0..100 (percents) |
| VisiblePointsDelta | VisiblePointsDelta 0 |
| WaitForAudioBeat | WaitForAudioBeat 1 |
| WaitForBeat | WaitForBeat 7, 1 |
| WaitForCellDown | WaitForCellDown 1 |
| WaitForCellUp | WaitForCellUp 1 |
| WaitForChannel | WaitForChannel 1 |
| WaitForCueStart | WaitForCueStart 1 1 |
| WaitForCueStop | WaitForCueStop 1 1 |
| WaitForDmx | WaitForDmx 1 |
| WaitForEvent | WaitForEvent “MyEventName” |
| WaitForHotKey | WaitForHotKey | waiting for hotkey assigned to this script in Code-tab |
| WaitForManualBeat | WaitForManualBeat 1 |
| WaitForMidi | WaitForMidi 0x90, -1, -1 |
| WaitForPageChange | WaitForPageChange |
| WaitForTC | WaitForTC 15,30,0,0 | hours, minutes, seconds, ms |
| WaitForTime | WaitForTime 15,30,0,0 | hours, minutes, seconds, ms |
| WaitForTimePos | WaitForTimePos 21,00,00,00 | hours, minutes, seconds, ms |
| WaitForTimerBeat | WaitForTimerBeat 1 |
| Write | write |
| WriteLn | writeln “Hello world!” |
| ZoneFXTimeScale | ZoneFXTimeScale 1,2,1 | Layer, Clock multipler, Metronome multiplier |
| ZoneFXTimeScaleDelta | ZoneFXTimeScaleDelta 0,0,0,0 |
| ZoneFXTimeShift | ZoneFXTimeShift 1,2,1 | Layer, Clock multipler, Metronome multiplier |
| ZoneFXTimeShiftDelta | ZoneFXTimeShiftDelta 0,0,0,0 |
| Zoom | Zoom 100 | value -100..100 |
| ZoomDelta | ZoomDelta 0 | shift zoom value |
|