Tools
Support
Pangolin Family of websites
Pangolin Laser Systems, Inc.
Kvant Lasers
Unity Lasers
ScannerMAX
Lasorb
Tools
Support
Pangolin Family of websites
Pangolin Laser Systems, Inc.
Kvant Lasers
Unity Lasers
ScannerMAX
Lasorb
This is an old revision of the document!
The Pangolin FB3-QS laser controller is a small, palm-sized box connects between a USB port on your PC and the ILDA input connector on your laser projector. To control additional projectors, you can add up to eight more FB3-QS laser controllers.
Dimensions : 4.2 x 2.8 x 1.3 in (110 x 71 x 33 mm)
Signal name | Pin | Notes |
---|---|---|
X+ | 1 | -5V to +5V |
Y+ | 2 | -5V to +5V |
Intensity/Blanking + | 3 | 0V to +5V |
Interlock A | 4 | |
Red+ | 5 | 0V to +5V |
Green+ | 6 | 0V to +5V |
Blue+ | 7 | 0V to +5V |
Deep blue + | 8 | 0V to +5V |
Yellow | + 9 | 0V to +5V |
Cyan + | 10 | 0V to +5V |
Z+ | 11 | |
Not connected | 12 | |
Shutter | 13 | 0V to +5V |
X- | 14 | -5V to +5V |
Y- | 15 | -5V to +5V |
Intensity/Blanking - | 16 | 0V |
Interlock B | 17 | |
Red- | 18 | 0V |
Green- | 19 | 0V |
Blue- | 20 | 0V |
Deep blue - | 21 | 0V |
Yellow - | 22 | 0V |
Cyan - | 23 | 0V |
Z- | 24 | |
Ground | 25 | Cable shield |
The front LED next to the USB connector indicates the current function the FB3-QS is executing:
Led Color | status |
---|---|
Solid Green | Powered (connected to USB but no connection to QuickShow) |
Solid Yellow | Connected (to the Quickshow or other software), but offline |
Red Slow Flash | Online, but output inactive (dummy stream, no cue active) |
Red Fast Flash | Online and output active (at least one cue active) |
Yellow Slow Flash | Online but output disabled (either invalid license, or some other fault) |
Solid White | Firmware update in progress |